Reviews
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple and high texture
I was looking for a number base to prevent blurring of the License Plate, but since it is not for decorative purposes, I wanted something as inconspicuous as possible, so I chose this one. I chose this one because it is thick enough to be solid and not visible from the surface at all. View detail
Very light.
[How is it used?
Reflector mounting section is used to install the company's moped two StickerBracket.
Since the reflector is not used, a commercially available plate is installed to cover the hole in the mounting area.
Was the one you received as per Image?
It's just that it says "lightweight," and it's meatless.
It is lighter than the one I used before.
Was the installation difficult?
Long holes are machined for easy position adjustment and installation.
How was your experience with it?
Lightweight but good without Chatter sound.
[Included Parts:were they on?
License Plate Bolt is also included, but
I am replacing it with a Torx bolt from another company.
[Was there anything that disappointed you?
None in particular
View detail
It is not a dress-up, but it increases the rigidity of the number.
Unless you use a Fender Eliminator, this License Plate Holder is the same size as the local number, so you can't see it at all, so I chose Black.
I bought it because there is no other product exclusively for local numbers, but it is perfect because I bought it as a reinforcement for the backing.
The purpose of purchase is to cover the back of the Number from mud splashes and chain oil splashes, and to protect it from bending.
View detail
Fits: Others Universal
The best product for Number protection
[How is it used?
Used for 400X License Plate
Was the one you received as per Image?
It is exactly as pictured.
Was the installation difficult?
Driver and Wrench are all that is required for installation.
How was your experience with it?
It's definitely a product I see a lot of on a regular basis.
[Included Parts:were they on?
Sponge is attached for cushioning between Body and Plate.
If you apply it properly, the number will be attached in a curved state, so please apply it with a little thought.
[Was there anything that disappointed you?
It is cheaper than other similar products, but it would be easier to buy if it were a few hundred yen cheaper.
View detail
Seeking to hide bracket and increase texture
Purchased to conceal Number mounting Bracket.
It was not completely hidden, but it was better.
The product is not as shiny as I expected.
be on the verge of tying the number Claws. should be spread out and then put Number between them.
I feel like I'm getting a little old-fashioned, but it's cheap. Well, okay." I feel like.
View detail
Fender Eliminator
I bought a Fender Eliminator, so I decided to change the Bolt as well.
I had a Torque tool at home and didn't have to buy a separate Nut, so I would recommend it to anyone in that condition.
If you're buying a tool just for this, I think you'd be better off with another Bolt.
View detail
Reinforcement
I had bent a License Plate once, so I installed it for reinforcement purposes, and it worked perfectly.
I used double-sided tape and laminated it with Number, and so far it has not peeled off.
View detail
Fits: Others Universal
Solidly built
I didn't want the License Plate to bend in any way, so I installed it as a counter piece.
It is well made and secure.
It's not cool if the License Plate is crooked.
View detail
It purchases in order to arrange a car body in blue.
It purchases in order to arrange a car body in blue. View detail
It is completely the world of a self-satisfaction. It attached, although he thought that it was somewhat expensive.
It is completely the world of a self-satisfaction.
It attached, although he thought that it was somewhat expensive.
View detail
Although the price is a little high, it is considerably pleasing. A feeling of thickness and a gorgeous is also perfect.
Although the price is a little high, it is considerably pleasing.
A feeling of thickness and a gorgeous is also perfect.
View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91946_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
In the Accent of License plate
Instead of the tasteless Hexagon Bolt, we tried to match the color of the car body.
There is no Hook function, but I think that's OK.
However, it may be a bit expensive.
View detail
DAYTONA：Lightweight License Plate Holder
I am glad I purchased it because the texture is good and the color is very beautiful.
Care must be taken not to over-tighten the Bolt. Installation was easy. Please consider purchasing this product.
View detail
![Repair/Option Parts]Bolt kit for Adjustable License Plate Holder](https://img.webike-cdn.net/catalogue/images/73791/tar009.jpg)
Fits: Others
Check Bolt's Size
I thought it was short because my Memo said M8x30.
I knew it was short…
The Black Dish Bolt with an intensity of 8 is in storage because it is not found anywhere else.
I wonder if the Color Washer has any use…
View detail
Install Number to Beauty
Purchased because I wanted a little Accent when installing the License Plate.
I am satisfied with the way it is made.
Is it a self-fulfilling Parts with no functionality?
View detail
For bending prevention
Mounted to prevent bending of License Plate.
This would prevent the License Plate from bending when hit a bit.
I think it will be bent if you fall or hit a Number unluckily, but…
View detail
fashion-conscious
It prevents the License plate from bending when it is hooked, and
Material:The Motorcycle looks good in the Plate of Aluminum with the color of Anodized.
View detail
fashion-conscious
Effective for protection of license plate and for press-up.
The included stainless steel bolt is rust-resistant, and the matching color of the Holder is one of a kind.
It also looks good.
View detail
fashion-conscious
I just need to replace the License plate mounting bolt.
It will look Gorgeous and increase the sense of Custom.
Anodized paint is beautiful and looks very good.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Is good
It will be casually stylish when attached to the License plate.
It is easy to replace the bolt and looks very custom.
Stainless bolt is also resistant to rust.
View detail