Reviews
Classic Mini Rubber Grip
This is the first time I have purchased this product.
Fit feeling is good.
View detail
Very high quality grips...
Indispensable for bobber and cafe racer projects,I choice these grips in my xs project.These grips are Gran Turismo style reproduction grips.It has a historical connotation..These grips are very comfortable. I have had a lot of expensive grips over the years, and these are just as, or more, comfortable. Easy to grip, even with gloves. I love the look , kind of simple old school.Materials appear solid and only time will prove otherwise.Properly sized for throttle tube and handlebars.It is easy to assemble, it does not move on the handlebar. You can apply some glue if you want.I definitely recommend and the price is hard to beat. View detail
Slip-resistant firmly in hand
I used it for 10,000 km and bought the same product because the waffle pile was worn out. The price is reasonable and good. View detail
Handlebar Grip for people with Large hands
The cap at the end of the grip is screwed on from the inside, so it cannot be closed unless the grip is removed if it loosens.
Unfortunately, for some reason, there were two washers in the cap fixing area, and I could see rust on both washers. I think there is no problem with the function of the cap, but I was concerned about it, so I replaced them with Stainless washers.
The size is too large for LETS II, so 3DPrinter is used to create the intermediate color and mount it.
Supplement
The Grip end section with the Cap removed has a
Since the Gold Washer (I.D.Φ5) is Inserted, it would be difficult to attach another Grip end.
Dimension/Weight
Handlebar side:I.D. Φ22.2, 145g
Axel side:I.D. Φ25.5, 127g
Cap：30g
Length of Grip section only 102.5mm
View detail
I like it.
I was looking for the old Superbike Grip and came across this product. It's not the grip I was expecting, but I like the design and the comfort of the grip. View detail
Fits: KTM 250 EXC, KTM 300 SX, KTM 300 EXC, KTM 400-525 SX, KTM 400 SX, KTM 525 SX, KTM 400-525 EXC-F, KTM 400 EXC-F, KTM 525 EXC-F, HUSQVARNA TC 125, HUSQVARNA TC 250, HUSQVARNA TC 300, HUSQVARNA TE300, KTM 250 SX, KTM 200 EXC, KTM 125 EXC, KTM 125-200 EXC, KTM 200 SX, KTM 125 SX, KTM 125-200 SX
Used on YZ125X. Thin and easy to grip
I have small hands, so it is good that it is thin and easy to grip. The end part is made of aluminum, and I feel it is difficult to drill a hole in it. View detail
Fits: HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled)
Dress-up
I bought this as a dress-up for my CB400F. I am very satisfied with the quality of the product. View detail
Perfect!
excellent quality product I'm happy with it I recommend it to everyone. neat, nice, strict design --- --- --- --- --- --- View detail
Matching.
[How is it used?
I had used it in Panigale and was happy with the grip and grippy feel,
I also wore a different color on my MONKEY.
How was your experience with it?
The soft grip softened the vibration to the arm.
How did it compare to other products?
I have been using domino, but only twice a month,
After about 2 months, Left Side rubbing appeared.
[Points to note]
Since we had a hard time with the Panigale, we applied Parts cleaner to the inside of the MONKEY and installed it.
View detail
The Yoshimura logo makes me grin.
The grips we had been using were worn out, so we replaced them with ones made by YOSHIMURA, as recommended by the Motorcycle store.
Aside from the Grip heater, I have not been so particular about the GripSingle item, but when I held the one I replaced this time, I was impressed by its exquisiteness in terms of the sense of catch, grip comfort, thickness, and so on.
Moreover, the Yoshimura logo is casually placed on the brim, which makes me grin!
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
It's solid.
I installed it on my SEROW and cut 15mm on the Throttle side. The grip is good. View detail
Raw Rubber grip… I like it!
After reading the article by Webig, I thought Raw Rubber might be good … and since it was time to replace it, I chose it.
I have always thought that raw rubber is inexpensive and is not as good as branded products such as Pro grip's.
As the article says, both the grip and vibration absorption are quite good.
However, the durability of Raw Rubber is not so good, according to the review.
I wonder how long it will maintain this feel after use …?
But the feeling after starting to use it is really good.
If you have never used it, please try it once.
View detail
Durable.
I use it as RossiGrip, and compared to HondaOEM and KIJIMA Dr. Grip, Honda/KIJIMA is softer, but it is not durable, so it wears out quickly and my hand gets black (I didn't last a year). On the other hand, this Grip is very durable and the balance of the grip is very good. I have been using this product for many years now. View detail
ariete aLead:02637SS Handlebar grip
The one I had been using was ripped, so I replaced it with this one!
It was installed with no problems and looks great.
View detail
Vibration reduction
I think it is not difficult to install, although it would be easier to come to the AxelThrottle EXACTLY if the groove of the Grip is cut so that the protrusion of the Throttle end on the AxelThrottle side can be inserted. View detail
This is the only one I use.
I can't use any other Grip than this one anymore, probably.
The grip, gripping feel, and thickness are just right for my hand.
View detail
Fits: HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE T-SportsSuper Glide T-Sport FXDXT, HARLEY-DAVIDSON XL1200C SPORTSTER 1200SUPER Low SuperLow XLT, HARLEY-DAVIDSON XL883SUPER Low SuperLow XLL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-TwoSportster Seventy-Two XLV, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSportster Forty-Eight XLX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSPECIAL KnifeSportster Forty-Eight Special XLXS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY Lo Fat Boy Lo FLSTFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BreakOutBreakout FXSB, SUZUKI BOULEVARDC50, HARLEY-DAVIDSON Electra GlideElectra Glide FLH, HARLEY-DAVIDSON FLHTCUElectra Glide Ultra Classic FLHTCU, HARLEY-DAVIDSON FLHTCElectra Glide Classic FLHTC, HARLEY-DAVIDSON Electra GlideStandardElectra Glide Standard FLHT, HARLEY-DAVIDSON Electra GlideSportsElectra Glide Sport FLHS, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESuper Glide FXD, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDECustomSuper Glide Custom FXDC, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESportsSuper Glide Sport FXDX, HARLEY-DAVIDSON FLHXStreet Glide FLHX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200IronIron XLNS, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom Custom XLC
Buns Grip
It is easy to grip and Grip works well. View detail
For the price they are good
Easy to install, with an arrow on each end indicating "up". The deep red/ ox blood colour is quite a nice red. They do seem a little thinner than the oem grips & somewhat softer too. I do like The grip pattern, but I suspect the rubber may be prone to wear.. but time will tell. I think my black leather gloves have blackened the grips a little as can be seen in the photos I've uploaded. View detail
Wiring is easy.
I am a 13 year old rider of YamahaYZF-R1.
I prefer a hard grips, and I want to fix the grips by wiring without using a bond.
There are three grooves on the Wiring, and the hardness of the Grip itself prevents twisting, and the grip on the fingers is very good.
We like the humble design, which is also functional.
View detail