Reviews
Installed on a WR250R
Since I installed RCS15, I needed a tank bracket, so I installed this one.
Tank was installed without any interference.
View detail
Purchased in conjunction with the introduction of Nisshin's Radipon
[How is it used?
Purchased in conjunction with the introduction of Nisshin Radipon
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Titanium, high quality, and great looking!
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
For those who can prepare the installation parts by themselves.
Material:Titanium Universal Bracket.
The cost is high, but the parts needed for installation are not included, and the manufacturer's installation examples are poor and do not show good parenthesis.
When I actually purchased the product, it was quite good, although there were a few alarms.
I think Neck is all about how much mounting hardware you can prepare.
If it's just a matter of putting it on, it loses half its appeal.
The tank side uses a Bolt anyway, so it would have been nice if it had a female screw like the PLOT one.
View detail
for Clutch Master.
I bought these to go with Gail's Clutch master.
There was a Plate type that was a little cheaper, but I dismissed it because it looked like a Bracket from Home center and bought this one that was on a top ranking.
It can be attached to the Mirror Holder.
The texture is elegant and not bad.
The only drawback is that the angle of the Clutch lever is not adjustable, so the Master tank may lean a bit depending on your preference.
And I wish I had Black instead of Plating if possible!
View detail
I wanted Black.
I bought this to go with Gail's Brake master.
There was a Plate type that was a little cheaper, but I dismissed it because it looked like a Bracket from Home center and bought this one that was on a top ranking.
It can be attached to the Mirror Holder.
The texture is elegant and not bad.
The only drawback is that the angle of the brake lever is not adjustable, so the Master tank may tilt a bit depending on your preference.
And I would have liked to have had Black instead of Plating if possible.
View detail
Universal Bracket
The original purpose of this bracket was to hold the Reserve tank of the Brake master.
but it can be bent arbitrarily, so it can be used as a highly textured Universal Bracket after all.
In order to use it as per the Image, you need to bend it into the desired shape, so some shapes require manual dexterity and Sense.
For now, with one end bolted in place.
Apply a suitable stick and bend it.
Curing the tip of Pliers with Hose, etc. and bend it by force.
Bend on the principle of Lever through Glasses Wrench
I use my imagination to bend and use it.
Notes.
It makes me sad when I hurt them when I bend them.
If you bend it too much, the color of the bent part becomes light.
If you bend and stretch it too much, it will break.
After shaping, it is easy to be deformed when the load is applied even when tightening or using.
and so on.
Because it is the one that it cannot be said that it is cheap for that though the quality is high, it is recommended to think well and to purchase it so that it can be used without failure.
View detail
The WORKS-made atmosphere of yesteryear
By bending it, you can bring the cup to the position you want.:The 2pc will hold the cup more securely. It reminds me of the brackets from Custom Shop Works in the past. View detail
Expensive, but good
For Separate Handlebars, but used for Bar handle.
It's your own responsibility, but it does lean forward a bit, but it's perfect.
But it's a bit expensive, and I can't complain about the small number and variety of products they offer, even though it's just this kind of thing;
View detail
With the brembo replacement
With the new brembo brakes, the tank was also changed and this bracket was installed to hold the tank in place.
Because it interferes with the Upper Cowl Bracket, I was able to install it without interfering somehow by fixing the parts which shifted 20mm.
I changed the fixed bolt to black because of the black color.
It looks good, but it can't be installed as is, and the price is reasonable.
View detail
![[NISSIN Repair Parts For Master Cylinder] Tank Bracket](https://img.webike-cdn.net/catalogue/daypic140709/30893_1_l_TS.jpg)
NISSIN Master Cylinder Tank Bracket
The mounting holes and pitch were perfect for the Tank for Nissin.
The texture is good and I recommend it.
View detail
BilletBracket
The price is a bit high, but it looks completely different from a normal bracket, so it's worth it. The color is not faded and I am very satisfied with it. View detail
I decided on the look and price.
I decided on the look and price.
Quantity:Pair (for Left and Right) This is the only one I know of that has a symmetrical Bracket, so I decided to go for it right away.
It's a great way to get points!
View detail
Sturdy construction, beautiful to look at.
Quantity:Pair (for Left and Right) Since I made S15BTank in S15, Bracket is also Quantity:Pair (for Left and Right) Purchased to make it symmetrical
It looks beautiful and is perfect for Bonsai Custom!
Some people point out the weight, but if you're going to point it out, don't use a Bracket in the first place, just shorten the Hose and mount it and Wire it!
View detail
Buy at the same time as Gale MASTER
I bought this at the same time as GALE SPEED's Elabo RateMODEL and Brake master cylinder.
Previously, the top-of-the-line model of the same brand "Elabo Rate. I bought the Clutch of I fell in love with its operability and high functionality and decided to buy it this time. Unfortunately, due to various reasons, I have not been able to replace it yet.
I bought this as a dedicated Tank Bracket. As you can see in the product image, the holder part of MASTER of GALE SPEED is "Master stay mount I thought about using the Universal Bracket, but if there is an Exclusive Bracket, it's better to use it. I haven't actually installed it yet, but I put it together temporarily, and it looks like I can install it without stressing the Tank and Hose. After that, I would like to try to install it without interfering with other parts.
View detail
A Master stay
Just made it look better lol 。。。。。。。。。。。。。。。。。。。。。。 View detail
high
I replaced it with Gail's Clutch master, so Quantity:Set to replace it
I'm a little concerned about the dirtiness of the welds for being so expensive!
I wouldn't complain if it was a little cheaper.
View detail
It's expensive, but…
I think it's a bit expensive, but it's a solid product.
Oh, no! That's why it's Large weird to bend!
View detail
Bracket Set without Tank
As for brembo, I often buy Koken's stuff, but this time Quantity:Set is very much appreciated.
Even if you only want the Bracket, you can get the Tank included in the Quantity:I had no choice but to Set.
I had to buy that. Finally I can get rid of that bother. The quality is also very good.
View detail
![Master CylinderTank Bracket [NISSINHorizontal Typefor Clutch]](https://global.webike-cdn.net/photo/impression/46/464020e081aa8f2750d32f777661e45aL.jpg)
Fits: Others
Brake and clutch are now in place!
Situations used range from city driving to Circuit!
The effects.... I think the effect on appearance and satisfaction is different (laughs).
The WorkSkill is a quick job, even for beginners!
The Bracket of the Brake master side was changed last time.
Now both Brake and Clutch can be replaced, and the self-satisfaction effect will increase.
I'm concerned about the fading of the Anodized over time in the future.
Finally, My GROM has come to the end of its customization phase.
View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200
for OEM.
I was worried about the durability because it is Carbon and very light, but I had no problems with it.
Please note that these are for the OEM Fluid Tank and are not compatible with the DucatiPerformance Tank or other brand products.
View detail