Reviews
GPStyle and easy to Control.
I am satisfied with the operating feel of the brake master, as it does not loosen its effect even in circuit driving, in which full throttle to full brake is repeated. I am satisfied with the feeling of the brake operation. The bi-piece design gives it a nice GPS style look. View detail
Looks are tightened.
I could not feel any change in the control of the rear brake, but the look of the brake is tighter.
The quality is clearly recognizable as Custom parts. I am satisfied.
View detail
Clutch hoseRefresh
Swage line is a trusted brand that we have been using for a long time.
This time, the clutch release is being replaced with a new one, so we refresh it together.
View detail
All Black Rear Brake Hose for the Grom
About quality and texture: I am happy with the quality of the stainless steel mesh covered teflon hose and the aluminium banjo fittings with black anodized finish. About the feeling of use: The look of the black edition hose is a nice subtle addition while the performance improvement is very noticeable when compared to the rubber Honda brake hose. Products to buy together: The front brake hose made available from Swage-Line would also be desirable to purchase along side the rear brake hose to complete the look and performance all round. Difficulty of installation: The process to install takes about three quaters of an hour to complete and that included the bleeding of the hose which for the rear brake hose was simple. Cost performance and comparison with other products: Good costing as you are getting quality stainless steel mesh as compared to some other brands that use aluminium. If you don't need an all black brake hose then there a slightly cheaper options. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you are in a country that needs brake hose to comply to a standard for vehicle inspections then you probably need a brake hose with the banjo fittings swagged onto the hose, if that is the case I'd recommend HEL. View detail
All Black Front Brake Hose for the Grom
About quality and texture: I am happy with the quality of the stainless steel mesh cover teflon hose and the aluminium banjo fittings. About the feeling of use: The look of the black edition hose is a nice subtle addition while the performance improvement is very noticeable when compared to the rubber Honda product. Products to buy together: The rear brake hose made available from Swage-Line would also be desirable to purchase along side the front brake hose to complete the look and performance all round. Difficulty of installation: The process to install takes about one hour to complete and that included the bleeding of the hose which was the most difficult part of the installation. Cost performance and comparison with other products: Good costing as you are getting quality stainless steel mesh as compared to some other brands that use aluminium. If you don't need an all black brake hose then there a slightly cheaper options. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you are in a country that needs brake hose to comply to a standard for vehicle inspections then you probably need a brake hose with the banjo fittings swagged onto the hose, checkout HEL. View detail
A stainless is reliable too.
A stainless is reliable too. View detail
A stainless is safe too.
A stainless is safe too. View detail
(webike monitor) He can feel easy about a stainless too.
(webike monitor) He can feel easy about a stainless too. View detail
A stainless is reliable too.
A stainless is reliable too. View detail
(webike monitor) He can feel easy about a stainless too.
(webike monitor) He can feel easy about a stainless too. View detail
A stainless is safe too.
A stainless is safe too. View detail
It works too well for me.
[How is it used?
It was installed from the time of purchase on a vehicle I got used.
Was the one you received as per Image?
The mesh hose is coated with black color, so it looks like an old product. Mesh hose! The feeling is a little lessened and better.
Was the installation difficult?
Since the overall length of the product is set according to the car model, installation itself is not difficult as long as Torque management is taken care of during installation.
However, there are some parts that require some knowledge, such as the circulation of brake fluid (?), air venting in the hose, etc. If you are a beginner or not confident, ask a reliable person or shop to do this for you.
How was your experience with it?
I bought this vehicle with the intention of playing in the mountains, such as forest roads, etc. As I am not a skilled driver, the mesh hose is too direct in touch (just squeeze the brake lever and it starts to work). I almost got my grip stuck a few times....
On the Asphalt, the power of the 2nd 220cc is slowed down well. It is a reliable item that can slow down the power of the 2nd 220cc on the Asphalt.
[Included Parts:were they on?
Mesh hoseBody, Installation Instruction Manual and warranty card were included.
[Was there anything that disappointed you?
No, if you compare it with Normal hose. Firmly braking power rises with little input." It's like
0Other items that may be useful include
Point and hang of installation
Tighten the Torque Management Hose and bleed the air well so that the brake will work properly.
Even if you have purchased parts for your car, if they are not installed properly, it may lead to a serious accident.
[Availability and clarity of the Instruction Manual
The installation itself was simple and straightforward, and the Instruction Manual was easy to understand.
[Notes]
As mentioned above, make sure to install the Fluid and bleed it properly, and if you are not confident about the work, leave it to a trusted person or shop.
When replacing the hose with a mesh hose, the entire BrakeUnit should be inspected and cleaned to ensure smooth movement of all parts, which will further enhance the effectiveness of the hose.
[ITEMS TO BUY TOGETHER
2 banjo bolts (if you are on a tight budget, you can use OEM Product as it is), 4 washers (definitely replace them with new ones), brake fluid (adaptable amount), and brake pads if they seem to be worn out. If you are on a tight budget, you can use the OEM Product as it is.
[Opinions and requests to Manufacturer
KDX220SR is no longer available with OEMBrake hose. Please continue the lineup for KDX220 owners.
View detail
Reliable manufacturer
[How is it used?
CB1000R, mainly used for touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
It is not difficult (replacing OEM Product) because Exclusive Design has a good Instruction Manual for handling.
However, for cars with ABS, there is a Line that goes into the ABSModule, so it takes some time and effort (Tank removal, etc.).
If you are not confident, we recommend that you install it in the shop because it is a Brake-related product and requires a lot of time and effort.
How was your experience with it?
OEM "Hito" But "Snap" I am very happy with the results.
However, until you get used to it, be careful when stopping from low speeds (it works too well and almost makes you stand and stagger).
[Included Parts:were they on?
All necessary items are included in the package.
It also comes with one Sticker.
Other items that would be helpful
Items to buy together
Brake fluid and air bleed tool are required separately.
View detail
SWAGE-LINE SWAGE-LINE Pro Front Brake Hose Kit
This ss front brake line has very nice quality, nice fit and finish. Very easy to install. Item was shipped fast and well packaged. I would recommend this brake lines. View detail
SWAGE-LINE SWAGE-LINE Pro Rear Brake Hose Kit
This ss rear brake line has very nice quality, nice fit and finish. Very easy to install. Item was shipped fast and well packaged. I would recommend this brake lines. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Swage line indeed!
I bought this to replace my Nisshin radipon.
It fits perfectly.
5cm Long was neither too short nor too much.
I would recommend it to everyone for its quality.
View detail
Mounted on VTR1000SP
I bought it with brembo RCS and it was a little difficult to handle, but I am satisfied with the performance. View detail
Used for VTR1000SP2
I used it for SP2. I am satisfied with the color Black and it works TIGHTLY! View detail
You should definitely wear it.
If the brake hose has been replaced, this should be added as well. View detail
Changed to Rear Sets.
We are a reliable Manufacturer.
Changed to Rear Sets.
I bought it because it was too tight for the OEMHose length.
I'm satisfied
View detail