Reviews
Hi everyone, Today I just received the peyton place exhaust (SP-120), so first impression is image, this is the best exhaust classic design, I like it and also nice material it's strength and nice sound
Hi everyone, Today I just received the peyton place exhaust (SP-120), so first impression is image, this is the best exhaust classic design, I like it and also nice material it's strength and nice sound View detail
Curve is easy to bend.
I'm obsessed I understood that Curve became easier to curve. It is very easy to bend and driving is fun (^^)
Although it was written even in the previous Review, since Front fork is still old, it got to understand the previous flavor very well ....
It is Front fork next time I save the gold.
View detail
Very Nice, Slient and I think this one is the most poppular for SR400, I really recommend to all biekr try to use this, Thank you
Very Nice, Slient and I think this one is the most poppular for SR400, I really recommend to all biekr try to use this, Thank you View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Importance for viewing, volume considerably higher,
Purchased non-compliant jmca, installed in 2000 sr 400.
Cafe racerCustom has been the best eye to see and I am satisfied but the sound is so noisy complaints come from the neighborhood.
Ska tuneSpec. If Main 20 or higher, Needle 4th tier or higher, Pilot 20 or more will be the setting of roughly. However, it is too good to be missed or straight pipe Pipe can not decide fuel adjustment easily.
In the performance aspect I feel that Torque declines at medium and low speed, elongation at high speed is felt. (OEM ratio)
If Air cleaner is OEM, the above contents will not fit.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
This slip on silencer made it to my place in Australia in less than a week which really surprised me. It was really well packaged and it made it to me in perfect condition. This pipe looks and sounds the part. Much better than any aftermarket muffler on t
This slip on silencer made it to my place in Australia in less than a week which really surprised me. It was really well packaged and it made it to me in perfect condition. This pipe looks and sounds the part. Much better than any aftermarket muffler on the market, I've had problems before with similar looking inferior products. Great tone and shape perfect for my cafe racer build. I can definitely recommend this product! View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It may be a little thicker - - -
Before installing it we feel pretty poor.
After installing it is a firm feeling for the wall thickness of Pipe.
Actually I'd like to get a bit more rigidity when I try to put a hand on the bar - - -
Appearance is clearer than NORMAL and it feels good! The weight is light enough not to be compared with NORMAL
Comprehensively I think that it is quite satisfactory.
However, it is not made so much, so if it is a bit cheaper it was five stars
View detail
Image as it is,
I do not want to feel high. Sometimes our car is an Injection car, and storage of Wiring is really hard. However, the feeling that I installed is indeed Large satisfied as I was in Image ♪ View detail
This is good !!
Custom for Motorcycle Rear suspension for the first time. Even such a me can afford to install!
Although it was an exchange with emphasis on appearance, when it gets on, it gets better than expected performance Big Ri! I can understand that even my amateur's ride improved. I do not know expert things at all but Motorcycle started to run suddenly!
it's recommended. (It is because four stars do not know the best)
View detail
Ah ~ surprised
I have been thinking that Suspension is also this kind of thing, because I thought that it was a taste of continuing to ride with almost NORMAL for 30 years and riding difficulties.
Recently I have something to think slightly, I start messing with a bit of details, finally to change Rear Suspension.
At first I was thinking about making it a bit cheaper but if you change yourself from long ago I made this product in the middle price range of this Manufacturer with high credibility.
After installing and running, I was surprised. It's going to be stable so long running straight. It is the same to turn. The sense of stability is completely different.
I understood the difficulty of getting Normal suspension again.
Also, a long time ago, when I added the KYB's Rear Suspension to another Motorcycle, I had a pretty solid impression, and this product was also prepared for that kind of thing, but it was a completely uneasy feeling. There will be Setting, but it is just good for me.
Almost similar Spec. There is also a cheaper Suspension of. Perhaps the performance does not change much, this is total material : By thinking of Aluminum, it seems that the texture is quite high.
Well, where would you like to go with the easy-to-ride SR.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Exchange with OEMGrab Bar
It is an exchange from OEMGrab Bar along with Custom. When installing, by all means only one side not touching Manufacturer 's person Called and I took a look at the product There was a problem with the product so I changed it with another thing. I was able to install easily the thing that the telephone correspondence was also politely sent and thing once confirmed the installation.
Rear around. Recommended for those who want to refresh.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Exchange from OEM's Rubber cap
It is an exchange from OEM's Rubber cap. It is easy to replace it because it just removes and installs the Rubber cap. However, as the other person says, as there are traces of shavings left, I polished the surface with a fine sandpaper with eyes and polished before installing it. It is recommended because it looks very good when combined with Aluminum's Top Bridge!
View detail
Somehow I was also attached by myself.
It is slightly higher than Case of a certain Manufacturer
Purchase because I wanted a product without Screw at the top of the head (Contamination, considering the penetration of water)
I tried it in a way that puts all Wiring in one place as it is amateur.
● In your own environment, if you have Rubber protecting the Case hole, remove Rubber, if you pass Rubber first, it is hard to put in later
● Wiring's Coupleretc. Remove, and connect terminals later for easy understanding Vinyl Tapeetc. Write numbers and paste them. Paper Tape breaks down when passing through a hole, so NG
● Put Wiring etc. in Case Large items of Socket and Wiring thick items in descending order.
● Passing Wiring from Large to a Rubber within Case
● Wiring's Coupleretc. If there is no problem, you can do it later
● Case's Wiring mouth Rubber needs to be a bit more powerful to attach to Case
It is easy to attach it so that it can be angled when pushing it in a state where Case is not fixed.
It was possible to attach it with a feeling like amateur.
Lens is an Instruction Manual like handwriting, but if you orient the direction of Pin like a picture, it gets a problem.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Peyton PlacePeyton Place Oakland type
WM's Bracket is exchanging for this item.
It looks better and Headlight can protrude slightly forward.
However, Bolt and Za Gold at the time of installation exchanged for CapBottle cheaply for the price.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Peyton PlacePeyton Place Front fork
The work itself is easy as it is exchanging with OEM's Rubber cap. Listing is also casually listed. I think that it is okay if the price is cheaper - - -. View detail
Peyton PlacePeyton Place Stainless Steel - Unta
It is a part that can not be seen at all from the front, but it looks a bit oblique. It looks pretty cool when taken in the picture!
I think that the strength is weak as compared with OEM, but it is not rusting with Stainless Steel and it is a part that is not affected even if there is not a little strength - - -.
View detail
I attached it to sr
I bought it at the same time as the company's Light Bracket.
Because I am not good at Wiring relationship, I installed it at Shop.
After all, Connectoretc. Although it is Large strange that it is Large strange, as around Refreshing around the Light, there is also a sense of luxury, and I am satisfied.
It is Simple Design.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
I installed it in the SR.
I bought it with the company's Headlight case.
I got Shop to do all the installation at once.
Because it is OEM's Meter, it was not possible to do LightUp much, but Position was a little more forward than Refreshing OEM.
I think that it is Simple and Stylish Bracket.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I think this item is the most popular in Korea. Sound is not much loud but good to change bike's image. If U want to ride ilegally in Korea, Buy JMcA version. And this item can be sold fast on thr second market. u can change exhaust easily with basic
I think this item is the most popular in Korea. Sound is not much loud but good to change bike's image. If U want to ride ilegally in Korea, Buy JMcA version. And this item can be sold fast on thr second market. u can change exhaust easily with basic tools. Anyway, Webike is the one cheppest site in japan without auction. Exhaust' color is changed to gold after use :D View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
ContiExhaust System
Although I understood, it is a considerable explosion, so it is better to be aware of the neighbors' eyes, residential streets and nightly nerves who are concerned about the nighttime
I think that it is the best if you do not mind it
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Subtle Curve
I like the subtle Curve which is not made by other companies.
It is also good to resist rust.
At the time of installation Bolt's hole was slightly Length insufficient, and it was mounted by force.
View detail