Reviews
This is enough!
It is HARDY's Handlebar. Since AC and USB power supply was attached to the Handlebar, it seems likely that a Bar pad can not be installed. Therefore, I looked for cheap ones. The price is also Reasonable and solidly made products, Anodized Treatment is also beautiful and this is enough.
As a hope Renthaletc. I think that it was good if there was Laser processing of mounting position angle like Manufacturer of.
View detail
Satisfied
Making is solid.
Handlebar I did not pick up around
It's better as it gets attached
Because you can also add smartphone STAND
Wearing it.
feel well
View detail
On Aluminum Handlebar
Buy with Aluminum Handlebar.
If you change the Handlebar from Steel to Aluminum, the vibration will definitely increase, so Weight is needed.
There are several other similar products, but we liked the way we can divide it and the shape of the end part, I liked it.
As a result, wearing without problems.
It is good that the appearance does not change to Large width compared to NORMAL.
The vibration of the Handlebar is also NORMAL (Steel) Same etc. (Level which does not matter even if it is increasing) I think that it is held down.
View detail
Medium、Gunmetal
HARDYLoad BarMedium, color purchased Gunmetal. Is the real feeling like a darker light blue rather than Gunmetal?. Depending on the condition of the light, please be careful if you are committed. But I like it because the color itself is Beauty. Handlebar As making it is solid and can be used with confidence.
View detail
Brace bar target
Brake master on Brace bar (Thumb brakes) Purchase to install. (Since the Brace bar is less than Φ22, half of the PVC Pipe halted is used to fix the Master cylinder and it is bitten while cutting it. PVC Pipe inner diameter Φ 16 It is too thick for outer diameter Φ 22. )
Purchasing criteria selected bar with less difference from OEM.
Although there are few differences, it is slightly lower as Position. Although this is my favorite problem, I became a favorite Position personally.
Thumb brakes, and Bar End also became installable, and it was a satisfactory remodeling even if it looked.
Only one point, rather than saying Gun meta, it is light blue! Those who imagine a dark gray should be aware.
View detail
There is no choice
We originally used the Bar End without Weight, but Weight was necessary as a light shake occurred. I want you to sell it with the setting of this product Weight only. End only Quantity : 1 Set, Daburu. Well, there is no choice but to divide it as a reserve at the time of fall. View detail
I got lost in Length - - -
Perhaps I think it is Normal handle, but MEDIUM (248mm) When I installed Black, it looked something like this.
It is easy to install, I think that it is the effect Large as Dress-up around Handlebar.
View detail
Gold suits you.
The width of Kawasaki 250 TR's Handlebar is too wide, so I bought this.
Both height and width were optimized.
I also think that Color is also Gold suits himself.
View detail
Actually I'm still hesitating - - - ^^;
Probably, this is Matching for my SEROW
Purchasing and thinking - - -
SwivelType also can not be thrown away - - -
Most importantly, it is attached to my SEROW
AntlionMount to SliderVerII
Purchasing thinking that Design Matching!
Well, I wonder if they can be used according to TPO (Lol)
View detail
Change from OEMHandlebar
Because I felt that the position of OEMHandlebar of KSR 110 was too high,
It was much lower than OEM, but it was not too low and it was just right..
I think that the diaphragm is just right and I can ride with a natural Position.
If you are planning to exchange from OEMHandlebar, why not?
View detail
I wonder if the outside diameter is too thin to install navigation etc..
There is no problem because the outer diameter is written in the item description,
Rubber packing is mandatory when trying to install Navigation etc.
Especially when attaching to a thin part in the middle it is cautionary.
The making is wonderful.
View detail
Purchase DAEG's Mirror vibration countermeasure
When running with DAEG at around 4000 revolutions, Mirror disappears at all because of vibration, so I thought it would be possible to reduce even a bit.
When I installed it, the vibration of only Left 's Mirror felt for some reason.
RightMirror is unchanged.
View detail
It was good to purchase
I thought that it is good to choose from several kinds of this cheapness and color which can be bought at about 3000 yen although the making is solid. For other Manufacturer it costs around 4000 to 5000 yen so it seems to be a good item for those who care about Cospa, because it looks slimmer and thinner when it is cheaper it looks better and Silver you purchase looks cheap It was a good impression without it..
As a performance, the Motorcycle is also called a single cylinder and the feeling that the vibration of the Handlebar was reduced is a feeling degree. But when I set the rotation speed to a lot of vibration, I touched the Brace and it was Large and it was not vibrating. So Mobile phoneHolderetc. I felt that it would be handy to install.
By the way, when attaching to klx 125 I think Short is exactly right. With OEMHandlebar, put Clamp on something like Tying Band which fixes Hose on the Axel side is just right position.
View detail
Mounting easy ^ ^
Short size is Exactly ^ ^
Without interfering with hexagonal Wrench 1 pc installation may take less than 5 minutes.
What about vibration countermeasures?.
I think that it is ok with a viewpoint of bars to attach various mounts.
I bought Gun meta but it looks like Green ^^;
View detail
Gold
Installation on HORNET, impression!
I had trouble with Silver and Gold because the car is Red
Purchased Gold according to Wheel!
Handlebar around easily with the color as expected
I was glad that I could do Dress-up (^^)
It's strength, but for Dress-up cum Camera's MountAssist
Because it is a purchase, it is Recommendation for people whose purpose is close!
View detail
HARDYHardy EZ Handle Brace
I purchased it thought to install Navigation using this Handlebar Brace. However, because it was a little long, it was forced to install. Standard type is too long for cb 1300 SUPERTouring, but I think the short below it is short. View detail
Unhappy with OEMHandlebar
I replaced because I was dissatisfied with the texture and height of OEMHandlebar. Drilling is necessary and it takes time and effort, but as you can see, the height does not change much, but it has become easier to ride because there is a stop. Because it has Handlebar Brace there is also Custom feeling. It is a time-consuming task, but if you want to improve Position or change the atmosphere around Handlebar, it is Recommendation.
View detail
Purchased on Design Importance
I bought it together with HardyHandlebar. I tried to buy it with my company's items, but it is light. Originally, my ZOOMERX was badly vibrated, so I thought that vibration would decrease if I changed it, but it did not change. I like Design and texture is good. Also, if the tightening part is Material : It seems to be more durable than Rubber's Bar End so it seems to be used for a long time.
View detail
It is a handy Custom.
It was easy to install because there was Hinge in the Clamp which was installed immediately after arrival Length of the bar was just right with Short
With this you can install various Holder.
View detail
Satisfying both texture and function
As a result of examining variously, I chose this product. The texture is good, Design is casual, yet it also satisfies Custom feeling. As a result, the blur of Z2 Mirror was satisfactorily solved and I am satisfied. I think the price is reasonable and it was easy to install. View detail