Reviews
There was a Size Film that did not fit the ROCKET 3R Meter
When I tried to attach it to the ROCKET 3R Meter, the second film from the Left and the second film from the Right did not match the shape of the Meter's Display.
The radius of the arc was a little large and the length was long. I decided not to paste the film because it would not look good.
View detail
Stabilizes the body
Introduced to facilitate knee grip.
Although there are few uneven surfaces, they do not slip at all and hold the body firmly.
I no longer have to exert myself in full Breaking.
Cutting can be done with scissors (or of course with a cutter knife).
View detail
I was mistaken.
It is not a pad, but an anti-scratch film. The length is long enough from Seat to Fuel Cap.
The sprayer comes with solvent, so it can be diluted with water and applied while aligning the position.
A spatula is also included so that the product can be adhered to while being squeezed.
If you scrub too hard, it will probably tear, and the solvent is too thick if you just add water to a misting sprayer, so you should adjust the amount.
If you have used Wet for Film and Sticker, it is no problem, but you can also use direct paste, if you prefer.
View detail
not quite
No way, there is a round hole in it.
I can't believe they framed a Seal like Logo design's Cushion...
Low rating because the design is not good.
Grip is Normal I think it is. I think it's better than when I don't have it on.
Grip.
View detail
Great
As others have commented, it is a good product.
Grip force is very good and stable.
When we contacted the Manufacturer for instructions on how to remove and apply the product, we received SPIDI and detailed explanations.
I would like to buy the same product next time.
View detail
Position to come Exactly in Hang-Off posture
[How is it used?
Mainly Winding, mountain passes
Was the one you received as per Image?
Yes.
Was the installation difficult?
Since the pasting is FreeHand, the difficulty level is proportional to the person's personality.
How was your experience with it?
In the normal riding position, it hardly hits the pad, but in the Cornering posture with the hips slightly bent down, it hits the thighs EXACTLY and makes it easier to hold the body.
[Included Parts:were they on?
Alcohol for degreasing, ManufacturerSticker, LogoSeal, etc. are all included. The only other thing that would be nice to have is a masking tape.
[Was there anything that disappointed you?
Not sure yet how durable or how much it will deteriorate over time, but Grip was as good as expected.
View detail
Recommended by webike, so I bought it.
I bought this one because it was a webike's recommendation, it was cheap on sale, and the price of the Stomp Grip was modestly higher, so I felt it was overpriced.
Compared to Stomp Grip
1.Very flexible and easy to apply.
2.I felt that it might not Grip because of the shallow projection, but when I tried to pinch it with a skin connection, it was comparable.
3.The Stomp Grip also came with a Side Cover section that does not touch the knees at all, but this one is lean with only the Tank section.
4.Inexpensive.
I am looking forward to the Circuit run with the combined effect of the Saiya Tank Cover.
View detail
Fits: YAMAHA XJR 1300
To Knee grip
I chose EasyGrip, but it didn't have enough grip. I am a good flyer, so I think it would be better to choose a product with a higher Grip for such a person. View detail
Seeking a sense of unity with Motorcycle in Positive Riding
I was looking for something to unify the grips of the inner thighs and the tank for aggressive riding. I was looking for something to unify the grips of the inner thigh and the tank.:1pc. is cut and pasted according to the shape of the lower part of Tank and Rear. (One step ahead of Rubber sheet) The Grip is expected to look like a Grip. I am a little disappointed that it doesn't look like Parenthesis is good. (I can't help but …) I'm not sure if the transparent Seat is better looking or not. The transparent Seat may look better. The effect of riding is that I used to have to hold firmly to get a sense of unity, and my lower body would gap if I relaxed even a little, but now my lower body is stable even with half the holding force. By paying less attention to the lower body, I am able to concentrate more on riding, and I am satisfied with the Large change. View detail
The best
[How is it used?
I used it for two weeks and was glad I bought it.
Was the one you received as per Image?
Product is exactly as shown in the Image.
Was the installation difficult?
It is a little difficult to apply, but there are YouTube videos on how to do it, and Large is very durable. Also, air bubbles are very noticeable after applying, but after a day, the bubbles are almost invisible.
How was your experience with it?
I can only say that the design is excellent. They do not slip at all.
View detail
Why did you choose white gsr750?
When I was looking to buy a gsr750.
Search various custom parts
In the middle of all this, I found this NeagriSupport.
I fell in love with the design.
White gsr750 would look great with this pad on!
So much so that I decided to whitey gsr w
The knee grip can be lightened by attaching it.
Driving has become considerably easier.
I would have liked a little more Blackness…
Large satisfaction with both the texture and design.
View detail
If you don't mind doing your own processing, it's pretty good.
Grip feel is better than I expected. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
I want to put it on Tank.
Was the one you received as per Image?
Both cards have a Stain-like aftertaste on the Pad, and evo would have been better.
How was your experience with it?
In NINJA, it is not applied to the tank side, so the only area that is hit is the knee, which is a little short on hold.
[Points to note]
It is advisable to check carefully before purchasing which position on the Motorcycle you will be affixing it to.
Overall, it is a solid product and I would purchase a Tank Part pad if available.
View detail
Great fitting and very good quality!
I love the idea that it's easy to install and looks great! No difference in the odometer view in general very good value ! Comes with all the necessary equipment for easy installation View detail
It's like Film on your phone.
It's similar to PelePera's Universal TaBrettFilm, which you can buy at the 100 yen Shop. This would only cost 200 yen. I think you should check carefully before you buy it. View detail
Different products.
I ordered the EVO to begin with and got the PRO. I'm going to use it as it is because I have to pay for shipping to return it. View detail
Grip force
Grip power is very good, I chose PRO. View detail
Eazi-Grip(EVO) vs STOMPGRIP(VOLCANO)
Quality and texture:Eazi-Grip Grip force:Eazi-Grip > STOMPGRIP
Eazi-Grip is made by die-cutting Large Seat and the cross section is left uncut, while Eazi-Grip is made by die-cutting Large Seat and the cross section is left uncut.
STOMPGRIP has a rounded cross-section and warts are not placed on the edges.
Eazi-Grip is gripped by both Material and warts, whereas STOMPGRIP does not grip as much with MaterialSingle Body.
The uncut cross section of the Eazi-Grip has an unpleasant snag because the wart is also severed.
The warts on the edges are better if they are cut off with Nipperetc.
The material itself is gripped, so dust adhesion and clothing dyes will stick to it.
So far I have been able to remove it with Parts cleaner, but I don't know what will happen as it deteriorates over time.
As I write this, STOMPGRIP seems better, but the reason I chose Eazi-Grip is because of its shape. (Paste position) It is
On ZX-6R, in case of STOMPGRIP, you need to have Rear Sets on or about 90cm inseam to have your feet hit the sticking position.
When purchasing, it is better to confirm which position you want the Grip to be in, and to confirm the photo of the sticking position firmly with Net.
View detail
Easy to cut and use as desired
It is easy to use because it can be easily cut and pasted into any desired shape. View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE
After all, it is stable when it is present.
If I'm wearing leather pants, I'm going to slip on the Tank.
It's a necessity because it's exhausting.
It would just be helpful if it were a little cheaper.
View detail