Reviews
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr X
I regret that I do not agree. I would like you to explain which type of car is difficult to install a bit more.
Attempting to install on a vehicle of type Z1 of ZEPHYR χ, the diameter did not match and the exhaust system did not enter.
I tried to stop, but the length of Screw? For installing the Exhaust System was insufficient and it could not be tightened.
I was worried about returning it, but it got dirty, so I did not return it.
ZEPHYR χ was in the corresponding model, but I wanted you to write a model that is hard to install due to additional writing.
View detail
Fits: HONDA CB350, HONDA CB750 Fore (CB750K), HONDA CB400 Fore (air-cooled)
review cb400f BRC Stainless Steel R Pin for Rear/Axle Shaft
Perfect! in accordance with the description, much more practical than the original system with the security, thanks webike View detail
Pretty nut
It is a set of shine nut. Good quality. It make my bike become very stylish. Very nice coating. I am happy with that. Thank you. View detail
A must have for aftermarket mirrors replacement
A simple product to make your bike look neat and tasteful. I always buy a pair of this every time I buy an after market pair of mirrors. Just slide them over and done. Can not be easier to install. It adds coolness and retrospect to any motorcycle. Just a word of caution, check carefully the diameter of your mirror shaft. There seems to be many sizes available but nothing on the description. So as long as it's not bigger than 10mm in diameter, then it should be fine. View detail
only this one.
I used it for hydraulic clutch of ZEPHYR 1100. I got to this by saying Aluminum in the place of Aluminum. It's cheap and relieved. Let's change it to a new one. View detail
Fits: HONDA CBR400F, HONDA CBX550F/Integra, HONDA CBX400F
Tappet adjuster tool
Best tappet adjuster tool. Very high quality tool. This tool helps valve adjusting. Must adjuster tool for every 4-stroke bike maintenance. View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z500, KAWASAKI Z400FX/Z400J, KAWASAKI Z550, KAWASAKI Z550FX
It is diverted to Lowdown Link for YZ 125 made by DEVOL
Although it is Oil seal for Kawasaki's old car,
It is diverted to Lowdown Link for YZ 125 made by DEVOL.
(Oil seal of OEM LINK has outer diameter 27 + Comma several mm, but Oil seal of DEVOL LINK is outer diameter 28 + Commamm. It seems that Repair Parts is not issued at Manufacturer, so User needs special attention)
View detail
Fits: HONDA CB400 Fore (air-cooled), KAWASAKI Z400FX/Z400J, SUZUKI GS400E, HONDA CB400 Fore (air-cooled), KAWASAKI Z400FX/Z400J, SUZUKI GS400E
I think that it is a good product
Items of this price with this price range are plating thin or cheesy things so many things I have only seen things hesitant to install on my Motorcycle, but I got lost but purchased because it was inexpensive. Results Large purchase and Large It was good. View detail
I have bought and used the product. Very good position. I have traveled many places together with their favorite cars. I'm very satisfied.
I have bought and used the product. Very good position. I have traveled many places together with their favorite cars. I'm very satisfied. View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP
Even with strengthening ...
Gasoline leakage at the time of full Gasoline Tan that can be said as a destiny of Z 400 FX ...
I bought it as a countermeasure attracted by the word of strengthening.
The result is that it does not change that it leaks when it is fully filled Tan (Lol)
For the time being, I was reconfirmed that it is the best countermeasure not to enter Tan so far.
View detail
Fits: KAWASAKI Z400FX/Z400J
Size that was not likely
OEM Parts Number is also out of stock and I searched Screw of the same Size at Home center but it was not found. Material : Stainless Steel also strongly looks good for Rust, so I like Large. The price is reasonable and recommended items. View detail
Fits: KAWASAKI Z400FX/Z400J
Unlikely
I bought it with Carburetor overhaul. It is Size which I can not find in Home center with Screw of special Size. Material : There is not worry of Rust etc in Stainless Steel and I was able to wear it without particular trouble. Price is reasonable so it is recommended. View detail
![Fuel Cock Mounting Packing (1 Set Of 3-items) [OEM Type]](https://img.webike-cdn.net/catalogue/19447/8783_TS.jpg)
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z550, KAWASAKI Z550, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J
As expected
I bought it as soon as I got rust in Tank. Size was also Exactly and I was able to wear without Gasoline leakage etc. It is an unlikely product so it is a great change to yourself. View detail
Mounting on Z250LTD
Wiring was short for a while when it was installed in Z250LTD. Since it was bad the spark of Right Side flew
I reverted to the OEM Product that was originally attached.
You can not use it just like OEM Product.
View detail
Purchase
With normal Cap bolt type I was looking for 45 mm object under M10 neck and purchased this item Hit. Although the purpose of use is not Front caliper, it is 45 mm under the neck and Pitch 1 with all screw type. I was saved because I was looking for 25 things. Since Washer and Spring washer are set, we can save the trouble of purchasing individually.
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J
Is beautiful.
There is not quite a Stainless Hexagon Bolt of this Length, and it is hard to keep cutting the existing Bolt beforehand because it is Large strange to keep good threads, so I bought it carefully.
I was thankful if it was a bit cheaper, but I am satisfied because it looks beautiful and looks better.
View detail
Fits: HONDA CB350, HONDA CB400 Fore (air-cooled)
BRC Step Aluminum Collar (Rear Sets I bought a set of these collars and found they are well made and exaxt match to the original Honda collars.
BRC Step Aluminum Collar (Rear Sets I bought a set of these collars and found they are well made and exaxt match to the original Honda collars. View detail
BRC Reinforced Speedometer Gear Box Retainer. I bought my BRC Speedometer drive retainer to fit on my 1974 CB350F1, WELL ON TRYING TO FIT IT TO cb350f I find it just does not fit right, I think it slots in behind the actual Speedometer Worm drive unit, i
BRC Reinforced Speedometer Gear Box Retainer. I bought my BRC Speedometer drive retainer to fit on my 1974 CB350F1, WELL ON TRYING TO FIT IT TO cb350f I find it just does not fit right, I think it slots in behind the actual Speedometer Worm drive unit, ive look at my actual copy of a 1974 Honda parts listing manual, it shows a diagrams that lets you see a comparison on how parts should fit together the retainer flits on first then a secondary retainer then the worm drive units slides on, in my case it looks all wrong, the outer retainer is steel plated, and the BRC Retainer is shiny new bright Alliaminuam, I can’t fault how its machine made, first class, it just not fit the Honda CB350F Nora will it fit the later Honda CB400F 1975 So with sadness I now find I will have to find a replacement, perhaps direct from Honda. View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z550, KAWASAKI Z550, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J
Out of print parts
I bought it because Gasoline blew up due to deterioration of Packing. The OEM Parts Number is also out-of-print a lot, RiproParts of such expendable goods is saved Large. The price was also reasonable.. I expect the durability after installation. View detail
Fits: HONDA CB350, HONDA CB400 Fore (air-cooled)
Instead of OEM
As I ordered the OEM Product, the delivery was long, so the same etc. I made this item of goods.
However, it is regrettable that the delivery time at the time of estimation was different from the actual delivery date and it was not different from OEM Product.
View detail