Reviews
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
It is an essential item.
It seems a bit expensive, but the texture is good and STAND is very easy to produce.
I wish I had put it on sooner.
It is difficult to work alone because the Screw must be tightened with the STAND stowed.
View detail
ZETA Side StandExtender
The price is a little high, but it is easy to install because all you have to do is insert the bolt and tighten the bolt. The ground contact area of the STAND has been widened, so I think it is more stable in places with poor footing, etc. View detail
Fits: SUZUKI V-STROM 1050XT, SUZUKI V-STROM 1050, SUZUKI V-STROM 1000XT, SUZUKI V-STROM 1000, SUZUKI V-STROM 250
Light weight, a bit soft
I installed Zeta side stand extender on my Suzuki v-strom 1000, it only takes a little time to install. The aluminum base is a bit soft, so it's easy to wear View detail
diversion
I purchased a side stand of CT125 old for the lowdown countermeasure of CB1000R and modified it, but because I could not do much lowdown and did not need it, I diverted it to the STAND of Doca which was short and troubled for the Right Side passage. So, I bought this board thinking about the appearance a little, and the processing of Side Stand was Large strange, but this board is a simple attachment, but I think Screw lock agent is indispensable. View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX160
This time, I got it.
However, the gap between the side stand and the body of the PCX seems to be quite different depending on the aircraft, and I gave up trying to install it because of the contact with the body. I was looking for something large and sturdy, and I found this Endurance product, which was designed with the part where the stand might come in contact shaved off, and I was able to install it perfectly. However, I gave it less stars because the quality was the same as the C-country made but the price was higher. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z1000
It was Exactly
It was Exactly for Z800. It was so Exact that it floated if the screws were not tightened evenly etc. during installation.
I applied Screw lock and installed it.
The size was larger than I expected, but I think the effect is larger than I expected.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://img.webike-cdn.net/catalogue/images/50737/22748760_1_TS.jpg)
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200
Area0 Height0 Screw×.
In terms of extending the height and area of the Side Stand, it is a very satisfactory product.
However, the included screw is too short and loosens after continued use. Screw locker is recommended.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX160
For changing the angle when using Side Stand
[How is it used?
It is 100% dress-up. w
WW will not enter rough terrain with PCX.
Was the one you received as per Image?
The finish was more beautiful than the Image.
Was the installation difficult?
It would be better if there was a screw lock.
How was your experience with it?
I was satisfied with the dress-up purpose and thought it was a product of a well-known manufacturer without any interference with the body.
View detail
![[YAMASHIRO] YK-017 Side Stand Pad](https://img.webike-cdn.net/catalogue/images/55528/YK-017_BK_TS.jpg)
To avoid damaging the floor with the Transporter
I purchased this as a Side Stand receptacle when transporting a vehicle by Transporter.
This is not a problem if the vehicle has a well-machined floor, but when Tie Down is applied with Side Stand on a carpet floor, if the Tie Down is applied too tightly, the STAND will again dig into the vehicle floor, damaging the floor.
To prevent this, the floor is less likely to be damaged because the pressure is dispersed when such a board is laid down. Also, it is possible to apply a firm "Tie Down" even on soft floors such as carpet.
Basically, I leave it loaded in my car and use it when I use Transporter.
View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250L
Satisfied
Very good. Didn't have a problem with the bad location. View detail
Just pinch and tighten with Bolt.
The product is installed on a large surface to prevent it from being dug into the lawn where it is stored.
Looks good!
View detail
You're safe now.
More than just a change in appearance, this thing allows me to park safely on unpaved roads.
I'm satisfied
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX160
ENDURANCESide Stand Board
I installed it on enduranceshort stand to match the vehicle height down, but the angle is too high and the bottom of the board doesn't touch the ground at all. I think it is made for the Normal stand, but the product feels solid. View detail
I am concerned about the protrusion on the back.
I installed it for the purpose of compensating for the unstable elements of OEMSTAND (just my subjective opinion).
The manufacturer is well made and there were no problems with the installation.
I am happy with the purchase for both the security and improved quality, but my only concern is the protrusion of the head of the 3-point bolt at the bottom of the STAND, where it touches the ground, and I am putting down Rubber to protect the floor of the Garage.
It is a pity, because it seems that the protrusion could have been eliminated with some design work.
View detail
![[YAMASHIRO] YK-017 Side Stand Pad](https://img.webike-cdn.net/catalogue/images/55528/YK-017_RD_TS.jpg)
Currently being utilized in a gravel parking lot at a Touring destination.
If it is available, we will use it, if not, we will devise a way to stop it, but we can stop it without much concern.
A conspicuous color is recommended to prevent misplacing them.
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S
It is effective. However, there are some things to watch out for.
The unnatural collapse when the Side Stand is applied has been eliminated, and it now looks natural.
The installation itself is easy, but there is a Point to attach it properly.
The Side Stand must be completely floated to properly align the floor ground contact surface of the product and STAND.
It is better to use a Center Stand or have someone support the Motorcycle.
Screws are too short, so screw lock agent is necessary.
The product is a heavy lump of Gold; depending on where you place the Motorcycle, it may scratch the floor.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200V
attachment
I have a 2004 XL1200C SPORTSTER 1200 that doesn't have holes, so I have to drill them out, but isn't the Instruction Manual's drilling at 8mm Large? I drilled with 6.7mm. Also, the tension is long, so there was some sanding work to do, but it was generally good. In this case, I wish I had a Center Stand. View detail
Safe parking for Camping area and hot Asphalt.
I was concerned about the small side stand with a small ground surface, so I purchased this product, which is compatible with the TORACER.
The design is good and anyone with a Hexagonal Wrench can put it on.
When I temporarily aligned the upper plate, it floated a little, so I was a little concerned, but after tightening the bolt, I was able to attach it without any problem. Just to be sure, I tightened the bolt after applying screw lock agent.
It is safe even if you forget the STANDPad during camping touring, and it eliminates the fear of tipping over when parking on the hot Asphalt in the summer.
I guess it is a little expensive for a car model-specific product of Puch, but I gave it 3 stars for cosmetics.
View detail
Safe on any road surface
Purchased for Grom.
I am worried after it rains because the ground of my house is soil.
So we installed this product.
Since I installed it, it has not sunk at all when it rains, which is a relief.
The vehicle itself is light, so it does not sink that much, but it is more effective when things are loaded in the Rear box, etc.
View detail
Causes were easier.
I think the construction of the product is very good.
The installation is of the pinching type and requires a little setting to eliminate gaps.
The cause was easier, but there were times when it was slippery or uncomfortable on Asphalt.
View detail