Reviews
Fits: HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB 50
Required for Flywheel removal
Required for Flywheel removal
Flywheel came off easily.
I don't use it except to remove the flywheel, so it seems expensive, but I can't work without it, so I don't have a choice.
View detail
I can't think of anything else.
This Cable Louver and Bell Hammer will make you happy!
Lubrication of the wire cable is completed in one stroke.
Clutchetc. operation system, even if you don't ride Off, the lighter the better, of course.
It is pricey, but well worth the purchase.
View detail
Used for next Fluid replacement
With the Tube and syringe, at this price, it's a good buy.
If it's a Lever Quik Quik so far, the Fluid will pop out of the Tank.
Is this a bad way to do it?
View detail
Used for future maintenance
I used to replace the brake fluid by quiquing the lever and taking it out through the Caliper nipple. This way, I had a hard time getting the fluid out of the tank when the lever was squeezed.
Will be used next time.
View detail
Caliper Cleaning Essentials
[How is it used?
Used to clean the pistons of the Front and Rear caliper of YAMAHA XJR400R.
It was also used to remove the TZr50R piston during Restore, but it was stuck and could not be removed here, so it was eventually removed with Fluid hydraulics.
Was the one you received as per Image?
The size is much larger than I imagined. It is just right for a man with large hands.
It's pretty bulky in the tool box, and I thought it was easy to understand how to use since it comes with an Instruction Manual.
How was your experience with it?
The part that grips the Piston is processed into a ThornThorn so that it has a good bite to the Piston, and it has a butterfly screw to hold the Piston in its gripped state, so that work to turn/move the Piston can progress not only when attaching/removing the Piston but also when squeezing the Piston out.
[Points to note]
ThornThorn will damage the Piston if it is not used with a firm Hold.
You might want to bite Dustclothetc. as it scratches a little bit even with proper use.
How did it compare to other products?
There are plenty of cheaper ones than this on Amazonetc., but there are not many that are ThornThorn processed, so that may be a good Point.
However, the price is somewhat high, so that is a weak point.
View detail
Belt has no durability.
[How is it used?
I bought this for EngineO/H when Restore TZr50R.
I fixed the Flywheel with this product and removed the Crankshaft Nut and ClutchGEAR Nut.
Was the one you received as per Image?
The image was exactly as shown in the picture, and although there were several other manufacturers with similar pictures, Minimoto was the cheapest, so I selected Minimoto. I selected Minimoto because it was the cheapest price.
How was your experience with it?
The EngineO/H was successfully used and EngineO/H was successfully used.
However, Belt's durability was almost non-existent, and after a few uses, Belt's reddish coating was falling apart,
Although it can be used for a time, we worked with caution because shavings of the film could enter the Engine.
[Points to note]
When using it for engine O/H, the belt of the Flywheel side and the Holder must be degreased with parts cleaneretc. or it will not slide easily and cannot be fixed. Also, since the handle is short and it is difficult to apply the Torque, it is better to use a PVC pipe or similar to extend the length of the handle.
How did it compare to other products?
I have never used products from other manufacturers, but I have a feeling that the very cheap products sold on the Net are probably from the same supplier, so if you don't buy products from a proper manufacturer and price, you might as well buy Net products on the assumption that they will be crushed.
View detail
Chain cut easily and conveniently
[How is it used?
Purchased to Cut the Chain purchased with the Restore of the LITTLE CUB that was given to us.
I used to cut the joints of the Piece with an electric sander etc., but by using this product, I can easily chain cut in a short time, which is very convenient.
Was the one you received as per Image?
This product, which is used by our friends and our shop, is reasonably priced and easier to obtain than other products, and can be used for most chains, as it is available in 420, 428, 520, and 525 sizes.
Was the installation difficult?
It may be a little confusing when you are not used to it, but if you read the Instruction Manual carefully before working on it, you will be able to cut it really easily.
It is a safe place to keep in the toolbox of those who like to Restore and those who need Setting, including back and forth Sprocket.
How was your experience with it?
If you read the Instruction Manual carefully before use, the process will be easy.
[Included Parts:were they on?
All the items are shown in the attached picture. I don't know the name of each Parts, so please refer to the picture.
[Was there anything that disappointed you?
I have only used the product a few times, but I have no disappointment or dissatisfaction with the product as expected.
Other items that would be helpful
Point and hang of installation
On the bottom of the Instruction Manual. Cutting the bolt with a cut bolt will damage the tip of the bolt. Use a sander or similar tool to scrape off the crimp. Also, be sure to position the pin so that the tip of the pin is in the center of the crimp. It is stated that
To be honest, even if you use this product out of the blue, you can cut a 420 or 428 size without any problem, but if you want to use the tool for a long time, you should use it according to the Instruction Manual.
If you are still not confident, do not hesitate to ask for a PRO.
[Notes]
With this product. "Disking operations." It is only a tool to Cut Chain.
Please make sure to confirm the number of pieces to be cut in advance to ensure that there are no mistakes.
If you make a mistake and cut too many pieces, the chain will be too short to use.
Also, do not reuse a chain that has been stretched by overuse until it is cut, because the spacing between the pieces has also been stretched, which may lead to wear and tear on the sprocket and damage to the chain even if its strength is within the manufacturer's recommended engine displacement volume. The spacing between the pieces has been elongated, which may cause the Sprocket to wear differently.
[ITEMS TO BUY TOGETHER
A new Chain, each Chemical product needed for its maintenance, and Dustcloth are also useful.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is easy for buyers to afford with Reasonable pricing and a wide range of uses.
View detail
I need a scale.
I had a Front Fork Oil Level Gauge that was a big dropper with a Memory attached to it, but it was damaged over time. I bought this one, but I think I prefer the one I had before. I wish it had a scale, but I guess that would have increased the price, so I didn't put it on. View detail
Nothing too good, nothing too bad.
This tool is necessary for pre-road adjustment of shock absorber.
Universal tool.
The quality, the feel, the price, everything is normal.
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX 125
This tool kit sure makes working on changing the fork springs easier
About quality and texture, I can confirm that the quality is great and that the materials used is a mixture of aluminum and steel that makes up the kit. About the feeling of use, This fork tool kit sure makes working on changing the fork springs easier and can be used on the Monkey 125 forks also. Allows for disassembly without damaging the painted and plated finishes. Products to buy together, Some higher weight fork springs from Kitaco would be ideal to also add to your cart when purchasing this tool kit so you can upgrade the front suspension for better handling. Difficulty of installation, I can say the fitment of the fork tool kit for my installation was very easy due to the simple nature of it's use caused by it's compact design and all inclusive items. Cost performance and comparison with other products, The pricing of the fork tool kit is high for what you receive but the product has a design that makes changing the fork springs easier then using random tools and all the other options are no different in price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Does not become a DucatiOEM pig
The radius size was exact, but the position of the projection on the hand side was not correct, so I used a grinder to cut it off. There were several similar products available from other manufacturers of external products, and I chose this one because of its quality, but I am satisfied with its thick construction. View detail
if it exists Chassis Chasher." Chain chicos end in
The tedious Chain cleaning becomes dramatically easier with this. View detail
Dedicated tools are still easier to use than home-made tools.
I used to use a self-made tool, but now I manage multiple vehicles and it was troublesome to change the oil level for each vehicle, so I purchased the self-made tool. View detail
High or Low? Cheap?
I think the value judgment depends on how often you use it! I used to use a short one, but now I have a long one with a long handle and it is easier to pull and easier to work with, regardless of my body position! View detail
scrubbing
I usually wipe with Dustcloth or something and can't clean the inside of the LINK, so I bought this because I thought it would do the job.
I used it on GORILLA, so with 420 Chain, I scrubbed and cleaned it, thinking it would be better if the Brush was a little narrower as it seemed a little wide.
Well, I managed to get the dirt off, but it didn't come off as quickly and easily as I had hoped. 520 Chainetc. on a LargeEngine Displacement Volume car would have made the job easier.
It also helps that I can use the long thin Brush on the other side to poke around on top.
View detail
Fits: BUELL All vehicles 91- (except 1125R), HARLEY-DAVIDSON SPORTSTERFamily
To remove the Primary.
Used to remove Primary.
It is rather expensive but easy to use.
View detail
Brake fluid exchange strong helper
First attempt to replace Fluid in Grom and YZF-R1. We were anxious to replace the Fluid because it is an important safety part, but we did it carefully. This tool is efficient because it uses a syringe to force out the Fluid remaining in the line. View detail
Required for Engine disassembly and assembly
This is a special tool needed when disassembling and assembling engines. I use it for disassembling and assembling MONKEY engines. View detail
Use it and you'll be convinced!
I gave high marks to Costa, but at first I thought it was expensive!
But if you use it, you will be convinced and impressed, that's all!
No more frustration with Injector!
I definitely want you to use it!
View detail
Easy to use
3-sided Brush is easy to use.
I've only used it once, but Brush seems sturdy.
I used to use the same kind of Brush at Road motorcycle, but there was an inferior product that made the Brush rose at one time.
View detail