Reviews
Refreshing
CROSS CUBShiftIndicator used for Wiring compilation
This is a Full Covered section, but I am pleased with myself for being able to summarize the Refreshing.
I think Large is also active in Wiring protection.
View detail
Turn signal plug from kcon
About quality and texture, Just a wonderfully designed rear sprocket with beautiful gold anodizing. A real special piece for the Monkey. * About the feeling of use, Another cosmetic upgrade over the previous black Kitaco rear sprocket and wow does this gold sprocket pop. * Products to buy together, A new gold drive chain is ideal to purchase together with this gold rear sprocket. * Difficulty of installation, This sprocket is a direct fit with no modification required, the rear wheel just needs to be removed from the motorcycle to allow for installation. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, This is by far the most expensive rear sprocket for the Monkey but if you are looking to add some style with the gold bling then this is the only one to go with. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you are wanting a gold rear sprocket at a more affordable price then checkout the one from Endurance for the Honda Grom. Use the product reviews to assist in making a decision on your purchase. View detail
Mesh hose protection!
Used to protect mesh brake hose.
It is not visible, but it is fitted into the part that might interfere with the trident.
Material:The construction is cheap because it is plastic, but the plating ones come off, and this one is less noticeable and more cost-effective.
View detail
The quality is good enough for my needs!
Emon is a friend of the common man!
It is Exactly for extending Wiring, adding Grounding Wire, etc.
I think any Wiring can be covered by crimping a separate terminal to this cord.
View detail
There is no problem
It is a good product in general, and I chose it because I imagined it would be more resistant to deterioration over time than the White color. View detail
It is stiff and helpful.
Since the clutch lever, wire, and routing, etc., have been replaced, it may be that the mounting points are subjected to forces in odd directions, or it may be that the quantity has already been reduced.:2pc. Set ruined.
The clutch can be cut without it, but it is smoother with this cover. As other reviewers have mentioned, if the installation method is correct, there is a little bit of hang.
I have one squishy one a year, but I always Stock it because of the price. I really appreciate the fact that you can provide these parts.
View detail
When in doubt, just go to Emon
[How is it used?
Used to install LED Fog Lamp on FZS600.
Was the one you received as per Image?
Since this Relay is compact in size, you should have no trouble finding a place to mount it. In this case, I installed it inside the Left side cover.
Was the installation difficult?
The instruction manual is easy to understand, so I don't think you will make a mistake in assembling the wiring. It was more time-consuming to put the wiring around the car body.
How was your experience with it?
No problem at all, the light came on easily. I have driven more than 5000km since installation and so far no Trouble has occurred.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:The length of wiring should be comfortable.
Availability and comprehensibility of Instruction Manual:The package is mounted with a detailed and easy-to-understand Instruction Manual.
ITEMS TO BUY TOGETHER:Electric Works Pliers are useful for handling the connection terminals of Wiring.
View detail
Mixed use of LEDs and bulbs
The front blinker by the OEM bulbs had burned out, so I replaced only the front with LEDs, but the OEM flasher would not stay on.
Therefore, the front is LED and the back is a mixture of LEDs and bulbs, but they are blinking properly without any problem so far.
The LED Blinker is from NC Racing CNCRACING and the resistors are also from NC Racing CNCRACING.
View detail
Convenient for Wiring pulls in Cowl!
This product is useful for pulling Wiring in Cowl. The needle gold is moderately hard, and the loop at the tip firmly guides the wiring! View detail
I used it for maintenance of Coupler.
I bought this product for maintenance of my old Coupler. I knew Emon was the one who covered these products! View detail
Dress-up
It can be attached to the Edge of the Fuel Tank to create a Classical atmosphere.
It is a good product for preventing scratches on the tank when attaching and detaching the tank.
View detail
It can be attached and detached many times with CoilType.
This product is CoilType and can be reused many times, making it eco-friendly and wallet-friendly. The color is a safe black, so it blends in with OEM product cords and does not stand out. View detail
It is strong.
Material:Stainless Steel makes the Bracket sturdy.
It is also resistant to rust, so it is safe to use externally, such as for Horn installation.
The size is just right and fits in a small space with Refreshing.
The solid thickness and stainless steel make it durable.
View detail
Convenient
It is convenient to have the Body Ground as a terminal to install many electrical parts of Other Brand Products.
With this product, it is possible to take Extra Grounding, which is very useful for adding Earth.
View detail
Convenient
It's handy to have one in your toolbox when you're doing Wiring work, so you don't have to worry about installing electrical components.
It is a perfect quality product that can be used in any situation and can be stored compactly so it does not take up too much space.
View detail
This is the first thing to do when tinkering with electrical components
Item number:E177
Used on various Motorcycles.
This is a normal conductor for cars/motorcycles.
The best part is that it is inexpensive.
0.You can get 20m of 75sq for less than 700 yen.
Electrical tinkering is a clean attempt.
I'll cut it longer for now.
↓
Fine-tune while Routing
Therefore, the cosmetics that can be used vigorously are justified.
In addition, this product is for cars/motorcycles at this price, so it has a certain degree of heat/weather resistance, making it relatively safe to use.
By the way, regarding the thickness, even 0.5sq can be used for Large and a half things since it can go up to 60W.
Personally, I prefer to use it without thinking about anything except where a very large current flows, so I use 0.75 sq. more often with a margin of safety.
However, when it comes to 0.75sq, when you want to branch, Quantity to general terminals.:In this sense, it may be preferable to use 0.5sq regularly while considering power consumption, since it becomes Limit when 2pcCrimp is used.
Well, this may depend on the mindset of the worker.
If you tinker with electrical components in your car/motorcycle, this is a standard product that you should buy at least once.
In the meantime, why not start by buying Red and Black of this?
View detail
It is a safe Emon product and can be used a lot without hesitation.
This product is cheap for the quantity, and since it is Emon's product, I can use it a lot without hesitation. View detail
Used with Z400Hazard feature addition.
[How is it used?
Used to add hazard function to a Kawasaki 2022 Z400 without hazard function.
Since the Z400 is used in Touring Main, I decided to add the Hazard function because I thought it was necessary to Appeal its presence to the following vehicle when stopped on a public road.
Was the one you received as per Image?
As per Image.
This product has a thicker wiring, and we felt that the wiring work was easier.
The instructions are carefully written and Emon's products have always helped me with Large change.
Was the installation difficult?
Those who can understand or have no difficulty with wiring work, blinker blinking, and Hazard blinking principles should be able to install without any particular problems.
However, I don't know what you are talking about a little bit, like the Blinker blinking principle. It may be difficult for those who are not familiar with it.
For those people, if you get a lot of information on the Net and try to work after you are satisfied with the information, you will not be in danger of fighting a hundred battles.
How was your experience with it?
The wires of this product are thicker, so the wiring work is easier to do than with Large.
Since the Blinker was set to LED, the capacity of 6A was not necessary, but this product was chosen for its ease of operation.
If you want to use Blinker as LED, there is another product by Emon with 1A capacity, which is also cheaper and better.
When I added the Hazard function to D Tracker, I used the 1A one, but it was difficult to do the wiring work.
Note that this product was used in combination with the Blinker position kit to add the Hazard function.
Wiring as shown in the photo allowed us to add both functions to Z400 without any problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
The use of this product is
Specializing in Motorcycle, the
Addition of Hazard functionality
BlinkerIndicator light is one of the most important components of a Motorcycle Blinker LED.
[About the drawings in the photo.
Those who work with the photos as a reference do so at their own risk.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Used in 3 different cars. The quality of the thing is good!
[How is it used?
HondaFTR223 (Past)
KawasakiD Tracker (Past)
KawasakiZ400 (Installed this time)
Used in the above 3 car models.
I have purchased three times because I personally felt the quality was good.
FTR223,D Tracker is used with DRC's Blinker, and for this Z400, the Blinker Bulb is replaced with a T10 LED bulb.
All of the above are flickering well as Blinker with no problems.
When I was using the D Tracker, it was used in Race and Off-road driving applications, etc..Large vibration is severe, but this product did not break down.
Was the one you received as per Image?
As per Image. I thought it came with an instruction manual, but the one I received did not have one.
Since there is a lot of information on the Internet, the installation was done without any problems.
Was the installation difficult?
Although there was no instruction manual, I was able to install it on the Z400 without any problems based on the information on the Internet.
However, there is a reason why it can be installed without problems.
The reason for this is that we have a service manual. It is.
Whenever I tinker with electrical components, I make sure to purchase and keep a copy of the Motorcycle Service Manual.
Service manuals always include a circuit diagram, which is useful when tinkering with electrical components.
Again, if you know what color the power and signal lines of Relay are, you can connect them with no problem if you have the service manual.
This installation on the Z400 vehicle was done with a Liang Maintenance loop and InHemp palmock in the location where the OEMBlinker relay was removed.
How was your experience with it?
My experience has always been satisfactory with no problems.
If you are not particular about the manufacturer of the LED-compatible Blinker relay, I think this product is excellent for the Large change cosmetics.
[Included Parts:were they on?
Bullet Type Terminal
[Was there anything that disappointed you?
It did not come with an instruction manual.
Items to buy together
Bullet Type Terminal in Emonetc.
The attached Bullet Type Terminal is not strong enough to recommend its use.
Service manual
View detail
For branching to Gasoline Reserve Tank
I used this product as a branch to Gasoline reserve tank. The grooves are cut so it is easy to use and the hose does not come loose. View detail