Reviews
Excellent Hammer...
Great little hammer! Quality of manufacture and finish is excellent and ANEX appear to maintain great quality control. The hammer itself is not too small with good weight for size. I use this mainly for small items like roll pins on brake span lever attachments or anything that requires a level of control when hammering. Webike are selling at a great price too, so I would recommend his hammer if you are considering one. View detail
Driver shape for easy turning
Because of the shape of the driver, Torque cannot be applied, but it can be quickly removed by holding the shaft and turning it.
I had the opportunity to use it at work and found it very easy to use and purchased it as a tool for Motorcycle maintenance.
View detail
Quantity:Save with the set!
It has a complete range of Sizes and is convenient to keep in your tool box.
The only complaint is that the smallest size is only held in place by a sponge, so it comes off easily.
View detail
Rounded tips, scratch resistant! Good quality!
It is used to attach Stickers.
Conclusion. Unquestionably a good product." It is! Unlike Tweezers with rounded and pointed tips.
Sticker is scratch resistant! It's hard to explain, but it's easy to grab things with a perfect grip.
The price is very reasonable … I would buy this product again even if it cost 3 times as much!
View detail
I should have bought Koch from the beginning (#2)
Common L-shaped Quantities:I had been using a set, but I happened to know at work that there was a Driver type Hexagonal Wrench, so I bought a 5mm one of the same series.
The L-shaped type cannot be used to work around electrical components with complicated wiring, which can cause licking of screws and damage to the wiring.
But with this driver type, all these problems were solved in one shot.
The Large size of the pattern is also different from 5mm and is thinner.
View detail
I should have bought this one from the beginning.
Common L-shaped Quantities:I had been using a set, but I happened to know at work that there was a Driver type Hexagonal Wrench, so I bought a 4mm one of the same series.
It is extremely easy to use and almost eliminates the risk of dropping tools and damaging the motorcycle.
View detail
When using Driver Frustration." Decrease!
I'll start with the conclusion. You should definitely buy one." It is
It is used by screwing in the tip of the Driver, but it is common when using the Driver.
Bolts. Pollock." Prevents falling off.
If it falls down, it's in the Cowl or at night, it's lost or …StressMAX.
You can prevent it. This effect… for only a few hundred dollars! Absolutely. "buy" It is!
View detail
Accuracy and strength!
Of course, as Precision Driver, the precision and strength of the tip is outstanding.
When I made Slit machining Spark plugs for Others, I also use Precision Driver for pushing and drilling holes to get BALI when I am about to Penetrating in Slit machining.
Really great tip strength!
View detail
Even though they look similar....
Tweezers can be found in a hundred different places.
However, there is still a difference in finish and usability that does not show up in appearance.
I put it side by side with a hundred items for comparison, but the BALI on the Edge is carefully removed and finished so as not to scratch the object to be sandwiched.
In addition, parts with this (Wiringetc.) When used on a motorcycle, for example, it requires a certain degree of strength, unlike, for example, holding down parts of an electrical product.
The one from a hundred-yen store was not strong enough and did not hold when needed. The products of a different manufacturer from ANEX are also weak in holding power, and this product was the easiest to use.
Therefore, I recommend this product when purchasing reverse-acting Tweezers.
View detail
It's easy to use!
I have been using Driver by VetCell, but it started to lick somehow, so I bought this guy I saw on Youtube.
I removed the screws from the CB400SF Blinker. It's like I'm chewing something solid." I am satisfied with the
The Grip also has a strange, easy-to-grip feel, like Rubber-like resin.
I thought I'd get a few other Sizes in the pipeline!
View detail
Convenient to have
Accuracy is not bad and Quantity:Easy-to-use Driver with 1 Set of 6pcs.
Key less This quantity is always needed for key battery replacement, etc.:It is safe to say that Set.
It can also be used to unlock Wiring from Coupler.
View detail
It comes in handy for details.
Effective for use in tight spaces where there are no gaps.
It is easy to turn and Torque can be applied so that it will not be licked.
Compact, so it's handy to have one in your toolbox.
View detail
safety
Safe and easy to find the power source. When searching for a permanent power source from the vehicle's harness, the LEDs on the body light up to make it easy to locate. View detail
It's for electricians, but Tough
This kind of standard is for VESSEL electric (Many manufacturers are copying it as it is) I think, but after using both, my honest impression is that it's hard to choose between the two. I prefer this one.
The grip with the groove of Beth Cell Type might be a little better to grip with an oil hand, but this one which looks smooth also has a texturing pattern and unexpectedly does not slide so much.
The grip is triangular, so it's easy to turn quickly, and if you need more power, the hexagonal driver shaft allows you to use a tool to turn it.
Heads with Plus notation are Material:Although it is plastic, it is quite sturdy, and although it is necessary to take it easy compared with Penetrating Driver, it is possible to use it enough even if you beat it. PlusMark of the identification doesn't disappear easily either.
If you want to use one to handle everything from fast turning to tooling up and turning with LargeTorque, this is the one for you.
View detail
Very short driver
First for carburetor adjustment (Minus) I bought it because I thought it was convenient for
The overall length of the screwdriver is shorter than that of a standard Stubby Screwdriver, so it is the only choice for tight spaces.
Also, the Clip of Cowl on the underside of the car body (Plus head) You can apply it straight without worrying about the clearance with the ground when you remove the
By the way, Minus side can be used conveniently when prying Clip which is hard to come off.
This small size allows you to use it interchangeably, so you can have both Plus and Minus, and it fits in your toolbox compactly.
View detail
CowlScrew Removal
I wanted something compact for removing Cowl's screws and I found this one, it is very useful for removing and installing screws in places where there is no space or where tightening force is not necessary. View detail
Bit holder
Bit holder with several Hex bits, CompactRatchet and Others, carry the smallest tools necessary
It's useful in times of need
View detail
Bit sockets and
If you have one bit socket, it is very convenient to have all the necessary sizes of HexBit
The HexBolt can be opened and closed freely with the Ratchet wrench
View detail
As an in-vehicle tool
Carry the Bit socket and Ratchet as a vehicle tool
Align the necessary bits and put them in the bit holder
It's especially useful when you change the OEMBolt to a torque-with-hole, etc
View detail
Anything useful
Although I was using the Exhaust System attachment part in Hexagonal Wrench, I was injured in the hand which made it difficult to enter power, but this product can be easily removed, tightened and easy to use, so it can be used for various Bottle something useful doing. View detail