Reviews
A little air!
Left Side was hard to remove, so I chose a day when there was no wind and degreased it as it was.
I got a little air in it, but no problem! Because it's an Off car.
Appearance is important. Scratch protection?
View detail
For crf250ls
I bought this to do Custom in Decal! View detail
For the 2023 CRF250LS
I bought this to do Custom in Decal! View detail
It was different from what I expected.
Purchased to attach to Helmet.
I ordered it because I thought it was a Sticker of the type cut out with a White edge from the product image.
When it arrives... [Color] It was a Type Sticker with Logo printed on a Clear square Seat.
However, since the base of the print is processed to be white instead of being printed in Red/Blue, the colors are better than those of the general PrintSticker of KRear Sets.
It was not what I personally expected, but it is a good product and I will consider its use.
View detail
Under the mask of a righteous hero
I purchased HRCSticker for my CUB90.
I prefer RSCSticker myself, but since the CUB year is 2005, I went with HRC.
I compared FACTORYFX's Sticker with the Sticker I purchased directly from Honda before. The Blue color is also different, but this is not a problem considering the low price and the fact that I do not always look at the Sticker with my eyes close to the screen. Both Stickers feel the same to the touch. It is properly cut in the shape of HRC.
The edge of the HRCSticker is white, but it is not uncomfortable even with the beige Leg shield. I have used it in the rain a few times. So far it has not peeled off.
I built my CUB myself, not with HRC, but one HRCSticker makes me feel good. The fake brave man was me... ♪
View detail
Good points and areas for improvement
I bought this for my CRF250Rally.
I bought it when I was on MD44 before.
This time, I switched to MD47, so I was able to get a new one again.
Purchase
Off does not run, so it may fall or be hit by a stone.
is not, but the foot of the Front is tightened and
I bought it because it raises the appearance.
The quality is good.
Improvements.
It has been on sale for a long time.
Information on how to apply the paste well etc....
It should be enclosed.
If you can stretch it well and feel good about it...
More people would buy again.
View detail
Decal FACTORYFX sticking on CRF250L volume
Nice. Race ishand practical!
It's a given that you have to degrease it properly when applying it, but I had to remove the Front Fork Guard on the side to make it easier to apply it! (Still, when I forced myself to paste it, I got air andGarbage!)
Anyway, I'm going to make a recommendation for Fork Guard's anti-scratch, dress-up and recommendation.
View detail
As one point dress-up
Last month, I purchased a Carbon printUnder Cover at a special price from Web!ke and put Sticker on it as an accent.
It is the same red as the car body. It is also a perfect match for the Carbon print pattern.
I am not sure about the durability due to rain and mud since I drive every day, but I will check from now on. (It is inexpensive, so we can replace it as many times as we want.)
View detail
appearance-centered
The Front, which had been lonely in appearance, is now gorgeous. View detail
Off-roaders, this one's for you!
Quantity at Motorcycle supply stores until now.:I had to pay almost 1pc.800 yen to buy and put up the Sticker. This one costs almost 3,000 yen at the time of purchase, but there are so many Stickers of various Manufacturers in Quantity:I thought it was a good cosmetic price for the set.
The quality is good and the Size is just right for putting on SheLoud, etc. The only thing that would be great is if the durability is better;
View detail
They look strong
Was the installation difficult?
Used on CRF250L (MD47).
Since it is a thick Decal, I think it is best to work with it while warming it up.
The shape of the Fork Guard has not changed, so it can be attached to MD47 without any modification.
How was your experience with it?
It will not be defeated by rain, mud, etc.
CRF's feet are now glamorous.
I love it
The Blue in Decal is a little darker Blue than the Blue used in CRF, but not too much.
View detail
Rear Fender Decal
I am satisfied with the design and the color of the Large model, although it is not a compatible model. View detail
Satisfied with Design
I put it on the Front fork.
Size is also Exactly.
View detail
Race Specification (appearance oriented) If you want to...
[How is it used?
Used for Cowl's Dress-up.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
The texture is solid and does not seem to be peeling off, etc., as it can be used in actual races.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
scratch-resistant
Purchased to prevent scratches as I go into the mountains.
It is divided into three parts, so it is easy to paste.
It's great because it looks and Parenthesis better.
View detail
Glamour Up
Tricolor color matched to crf250rally looks good.
crf250 boasts Material:AluminumSwingarm will be hidden, but I think it will provide some protection from the number of off-road falls.
Decal is completely divided into three sections, which is quite nerve-wracking when applying it.
We fine-tuned it by watching it many times from afar.
View detail
No modification to the Swing Arm of the D-TRACKER-X
[How is it used?
Model used:2005 D Tracker
Applications:Motard race, Touring
Duration of use:In continuous use for about 5 years.
The vehicle uses the D-TRACKER-X Swing Arm, and this product is attached to the Swing Arm.
Was the one you received as per Image?
As per Image.I was using SUNSTAR's Sprocket and RK's Brake Pads, so Decal's look was exactly what I wanted.
We also felt that the Decal itself would provide good protection for the Swing Arm due to its thick wall.
Was the installation difficult?
It is not a difficult task if water pasting is done. If you have a Squeegee, you can paste on Beauty with a high probability.
If you do not do the above or cannot prepare the above, you need to concentrate on the application and carefully apply it so that air bubbles do not form.
How was your experience with it?
I have been using Decal for about 5 years and it sticks well and protects the Swing Arm well without peeling off.
The Decal itself is also sturdy and large enough that it has never been torn or damaged in any way.
Also, the appearance of the Large change was improved, and I was satisfied with the Large change without any color fading.
I was also satisfied with the Large change because it has the Manufacturer logo of the Parts I use.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
sprinkling
wipe off the fog (about 300 ml empty Spray bottle) and neutral detergent and water.
A drop or two of neutral detergent is OK; add it to the misting cloth along with water. Fill the water to the brim.
Lightly dampen the paste surface and Decal with a mist wipe.
Then, paste them together. At this time, it is best to avoid air bubbles as much as possible, so that later work will be easier.
After pasting, the Decal is pressed down with a Squeegee, spatula, or Towel to expel the aqueous solution and air bubbles.
Then wait a little and you can paste it into Beauty.
View detail
Cheap and cool!
GSX-R1000R Attached to 2019 Swing Arm
I have been looking for a MichelinSticker to attach to the Swing Arm with reference to the GSX-RR in motoGP.
Although Michelin's Sticker is sold at supply stores, the design is slightly different…
And the price for the size and feel to be put on the Swing Arm is just under 1000 yen;
So we have continued to forgo it.
But I finally found a nice Sticker on webike!
Although the design is slightly different, it is very close to that of GSX-RR, and the size feels exactly the same, at a low price of 330 yen/sheet.
I did not hesitate to buy it.
The manufacturer, EFFEX, is not some unknown manufacturer that I have never heard of, and the product I received was of a quality that I was fully satisfied with for the price.
This brings my car another step closer to the GSX-RR.
Thank you very much
View detail
Cute but solid.
The product was more solid than I expected.
It is necessary in case of emergency, but it has strong fashionable and parenthesis good for this type of car.
View detail
I think Sense is great because it makes my feet look gorgeous and it matches the body color of MD47.
[How is it used? Enjoyed driving on the forest road while we were on the touring.
Was the one you received as per Image? It is thicker than I expected.
Was the installation difficult? It wasn't difficult, but since the Decal is thick, I had to use the Dryer.
It is essential to apply it while warming it up and removing the Air.
It doesn't seem to be for MD47, but I was able to apply it with no problem at all.
How was your experience with it? FrontThey are great for making your feet look gorgeous.
[Included Parts:were they on? None
[Was there anything that disappointed you? nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail