Reviews
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Cb400Sf main stand
Wow item is very easy to fix and solid too. Shipment is fantastic! Super fast shipment! Definitely will purchase more! Thanks Webike! View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
The upright position gives it a nice old car feel.
[How is it used?
?When I do some tinkering with my motorcycle, it is easier to work and clean with a center stand, and I thought it would be better for my motorcycle to be upright.
Was the one you received as per Image?
It was more solid than ?Image. I think it is indeed OEM.
Was the installation difficult?
?Rubber was hard to screw in, so I applied detergent and put it in a vice.
?I had referred to a YouTube video on how to install the spring, so I shaved about 3mm off the spring and bought a tool to pull the spring beforehand.
?Spring was attached by pulling at the end, but it took a lot of force and was tough. I bought a tension spring hook just for this.
How was your experience with it?
?Of course it's very nice; you pull up the Grab Bar while putting your weight on the protruding part of the STAND, which is quite heavy. But I feel secure because I'm not standing on one leg, but standing firmly.
[Included Parts:were they on?
?I had everything in order. I prepped everything on YouTube to see where and how to use it.
[Was there anything that disappointed you?
?Motorcycle is used but the Center Stand and Engine Guard are new, so it looks almost like a new car at a glance. I am glad it is as I expected.
?No disappointments at all. The only thing is the high price.
■Points of installation and hang
?Spring should be hooked up and installed last. Also, the Spring pulling tool costs 500-600 yen, so you should definitely buy it in advance. It is quite difficult to do because there is an exhaust system nearby.
Availability and clarity of Instruction Manual
?I don't think there was an Instruction Manual to begin with. Everything was taught on YouTube.
?Honda, please thank YouTube for their help.
Notes
?I don't want to knock over the Motorcycle by doing something wrong in the first place, so I always hang a chain block from a beam in the back of the ceiling. (Chain block was bought to move garden stones.)
Again, using the Chain block, Quantity:Pair (for Left and Right) I put a rope through the bolt at the top of the rear shock of the motorcycle and lifted the rear of the motorcycle up to make it easier to work with. Also, at first, I asked my wife to stay on the other side of the motorcycle so that the motorcycle would not fall over. It is good for those who have a variety of tools, but those who work with a minimum of tools need to be careful not to let it fall over.
? There is a Motorcycle shop on YouTube that has installed a Center Stand on a CB400SB, and you should definitely watch that and learn before you do it. Also, he is very skillful and lean.
Items to buy together
?Tension spring hook (like a spring puller)
?In my case, it is an early NC42 CB400SB, so I needed Grinder or sandpaper.
Opinions and requests to ■Manufacturer
? On YouTube. Instruction Manual contains …" but the flimsy Quantity written in English Version:It only contained 1pc. of paper. the Motorcycle shop on YouTube was much clearer.
?Motorcycle is a used 2011 model, so I originally planned to buy a cheap used Center Stand and install it, but there are few people who can buy the Center Stand Body at a reasonable price, but I couldn't find the SpringOthers' Included Parts:Quantity. However, I could not find many people who were selling them, and I could not find any other Included Parts:Quantity other than the Body.:I don't know where Set is sold, so in the end, even if I could buy Center StandBody for 3000-4000 yen, I had no choice but to buy it new for me, because I couldn't do anything if I couldn't get decent Included Parts:.
?? Also, there is no mention of Center Stand in the Parts catalog or anything, so it still seems that Included Parts:is hard to get, and it is hard to understand how to install it, and if Motorcycle shop can install it for about 3,000 yen, from today's experience If a motorcycle shop can install it for about 3,000 yen, I think it is cheap enough. But if they say 5,000 yen, I think it is a bit expensive.
I think it is still a great product as an ?OEM Product.
?It would be helpful if you could mention the OEM Center Stand in the Parts catalog if possible.
View detail
Excellent OEM Centerstand
Installed on a 2014 Honda CTX700. Bikes should come with centerstands from factory we all know this. Especially if they have the mounting points for them. Finding one for this bike was unusually difficult. Retailing at around $200 + shipping. This was a cheaper option at $150 with the chain stop shipped. Not to mention Honda built. Can't go wrong. Now brakes jobs and chain adjustments are a breeze. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Good product for CB400SF, Revo 2019 model
Product fits nicely without the need to remove the exhaust pipe. The tech fixed it up in 10 mins and commented the ease to fix it up compared to those after market main stand. View detail
I feel more centered!
Shouldn't all chain drive bikes have a center stand as stock? I think so, so I added one to my 03 Honda CTX, and I am very happy with it. I looked up some videos on Youtube to help with the process, and it all went well, although securing the spring was more difficult than I thought it would be. A ratchet strap did the job, but the spring is really tight. Overall, I appreciate Webike's price and shipping. I got the stand stopper as well, it's essential for my bike. View detail
Nice Product
It was came realy quick and pacetged well Its look very good quality and came with instraction. I didnt use the instraction There is you tube movies on how to do it it works great and for my opinion its A must have part View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Improved serviceability
I purchased this product in the hope that it would improve stability when stopping and maintenance around the rear of the car. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Essential Item With Excellent Quality
The center stand is essential for chain and rear wheel maintennance, and easily holds motorcycle stable. Construction quality is excellent as expected from Honda OEM parts. Installation instructions for CB400 Hyper VTEC Revo could not be found, however installation was straightforward and took about 20 - 30 minutes. Overall very satisfied with this centre stand. View detail
Honda Main Stand
Very good service . On time delivery. Received in good order. Installation are easy as instructed. Perfect which is highly recommended for online purchase. View detail
2014 NC750X
This stand fits my 2014 NC750X perfectly. Easy to install and used ratchet straps with double tywraps to pull the springs into place. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
OEM quality as you would expect from Honda
Fits perfectly, works perfectly as you would expect for a genuine accessory from Honda. The springs where tricky to get on, I found putting them on with the stand in the upper position to be easier. View detail
Great OEM part
I was not sure at first of ordering from as far away as Japan, I am glad I did. The parts were exactly as listed and shipping was way faster than I expected. I installed this center stand in 1 hour with 4 hand tools in my driveway. I recommend highly. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
cb400
This is an OEM Honda main stand. Genuine excellent product. massive, stable, and very easy to install.Comes with an excellent installation manual link from Honda. Good price. View detail
Honda original support
My model is NC750X. The brand is Honda. Honda bought the Honda original big brace, made of steel; the original car is not equipped with big brace, only diagonal brace, so if you park on a slope or maintain the chain yourself, it is very inconvenient; because of the belt The Honda NC750X with DCT function weighs 230 kilograms in a naked car. If it is full of fuel, it will exceed 240 kilograms, so the quality of the support is still very important! Believe in Honda's original workmanship and quality, I am very satisfied with the original parts purchased by ibike! In addition, you need not only strength and skill, but also some weight! I believe it is very difficult for girls to hold up. ---------------------------------------------- My car is Honda Honda NC750X brands are buying a Honda Honda factory support large, the material is made of steel; the original car is not equipped with a large brace, bracing only, so if docked at the slope or maintain their own chain inconvenient; because the band Honda Honda NC750X DCT function of bare vehicle weight 230 kg, if will fill up more than 240 kg, so the quality is still very large hold the key! I believe the original workmanship and quality Honda Honda, I am very satisfied with the original parts of the ibike buy! Also I want to hold up a large support not only need strength and skill needed some weight! If you want to believe the girls hold up a large support very difficult. Powered by Google Translator View detail
very good
Very good accessories, which have been installed on the motorcycle at present, are easy to install and practical, very good! View detail
Works Perfectly
I had invested in a paddle stand to lube the chain on my 2013 NC700S. I thought that if I had tools that could be used for another bike it would be a better investment. In reality it is much better to have the centre stand. It is just way more convenient and having to do this every 800km it es getting well used. Now that I have it I almost never use the paddle stand. Lots of tips online about attaching the two springs. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Worth every money to get a genuine honda mainstand
The previous bike i had used to have only mainstand. every since i changed my bike to Cb400 Super 4, it felt weird parking my bike with out a mainstand. I’ve been surveying the prices for it every since. Buying at a local dealer cost roughly 20% more and that is without installation. Buying from webike plus a trip to my favourite mechanic cost lesser than the price of buying it from a local dealer. Super satisfied with this purchase as i can now park with less hassle and makes turning the rear wheel with much ease! View detail
NC750X Center Stand
Original parts are very suitable for 2019 NC750X , the quality is very good. DIY Getting that spring stretched and attached is real tricky , need special tool installation View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
As expected
I installed it based on reviews and Net information from others
What I had a hard time doing was to fit the body and to install the spring It was
? s Rubber was very helpful to me, as was the Review written by others It's easier to pull than to push it in, and while fitting the Rubber into the hole, Reverse If you pull it from the side, it goes in easily with Pliers etc
? It was impossible for me to install the Spring on the ? So I'll tell you my own way
Please refer to the instruction manual etc. for the process of installing the Spring
When you install the spring, first of all you need to fix the main stand If the main stand is on the ground, the distance to extend the spring will be longer, and it will be hard to extend the spring So, you should fix it at a position where the STAND is about 45 degrees So, fix it in a position where the STAND is about 45 degrees This will minimize the distance between the spring and the ground You can use a string or something to fix the Spring to the nearest Parts (In my case, Swing Arm.) I've tucked it in
Once you've secured the STAND, it's time to hook the Spring to the STANDBody Again, I used a string
First, prepare a string that you can throw away One thing to keep in mind here Don't make it too thick; it will be difficult to remove the string after you've installed the Spring On the other hand, if it's too thin, it's not strong enough and not suitable
I often used Vinyl string, which I use to bind used books, etc
Make a loop about 1m long with the prepared string I was a little nervous about the strength of the Vinyl string I used, so I made it double
Hook the loop you made to Spring and your feet Then, using the force of your feet, gradually stretch Spring into the grooves of STANDBody Once it is fitted, remove the string and finish
It is the end of the installation with fixing the Shaft with reference to the instruction manual It took me about 40 minutes to install the shaft
I hope this is helpful
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Honda CB400SF
Strong and sturdy. just what you want in a mainstand for a heavy bike. Price is reasonably priced and definitely cheaper than buying in Singapore shops. Shipment was prompt and speedy. Trust anything that is made in japan! View detail