Reviews
Galespeed rear master cylinder
Very well made and light. Great feel and built quality. Perfect upgrade from stock unit. Better control of my rear brake with this unit. View detail
a durable fish
Hello I wrote sitta on the gaelic forging wheel I liked it because it was lightweight But it wasn't durable I found this 520 product while looking for a durable one It's a bit heavy, but it's more durable I'm generally satisfied Thank you. View detail
Gold color Pivot pin
[How is it used?
Installed and traveled about 200 km.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Simply loosen and replace the Pivot pin and Nut.
However, GALE SPEED's Wire Clutch Holder has a very thin washer between the holder and lever, and I almost lost it when the washer collapsed. The Pivot Pin of the early equipment seemed to be coated with Locktite and was a little hard to loosen. Early Pivot pins had bearings on the lever side and did not seem to be coated with Grease. When installing the ultra-thin washer, I applied a small amount of grease to the lever side and stuck it on while inserting the pivot pin.
How was your experience with it?
The feel is the same, but the Brembo master side has also been changed to Gold-colored Pivot, so the Quantity:Pair (for Left and Right) I am very happy with the matching look.
[Included Parts:were they on?
Pin only.
[Was there anything that disappointed you?
None
A word of caution...do not lose your ultra-thin Washer.
View detail
GALE SPEED GALE SPEED Rear brake master cylinder
I bought it with the intention of combining it with SamBrake master in the future.
The amount of Stroke is increased compared to NORMAL, which seems to have increased Control.
By installing Air-freeBanjo on the rear brake master, air venting becomes easier and maintenance is improved.
View detail
GALE SPEED GALE SPEED Sam Brake master
Originally, it seems that it started when Mick Doohan developed a Brake lever that could be used with the Left hand so that the Rear brake could be used in the deep Right bank, so that the FootBrake of the Right foot could no longer be used.
I can't bank that deep though.
When installing the brake hose, carefully check the length of the brake hose to be used between the brake master and the rear brake master.
In the GALE SPEED lineup, the FrontFork Cramp is only available in Φ50, but it could be installed on a CBR650R with Φ48 by inserting anti-vibration rubber.
The air extraction is very Large strange. The air from the Sam Brake master did not come out easily.
If the air extraction is not done properly, the FootBrake will work well, but the Thumb brakes will not work well.
I had to bleed air for 3 days after installation.
View detail
Love it
It's a lightweight beautiful part that looks fantastic on my new Gale Speed wheels. Options are a bit limited when selecting a sprocket for these wheels so I was very pleased to find this part as my favorite option. The maching is great. I am very happy. Love it! View detail
Straight Nipple for Master Cylinder
[How is it used?
It was originally intended to be used for the Front or Rear Brake master, but it could also be used for the Sam Brake master.
Was the one you received as per Image?
As per Image
Was the installation difficult?
With Snap Ring Pliers, removal and attachment is easy.
How was your experience with it?
The Brake hoseLine is now on target.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Hose Adaptor for GALE SPEED Thumb brakes
An indispensable part for installing GALE SPEED's Thumb brakes.
Is it just me, or do the GALE SPEEDs not match the Rear brake master's Black or Brown?
View detail
FrontFork Cramp for GALE SPEED Thumb brakes
GALE SPEED lineup is only Φ50. My motorcycle is Φ48, so I used 1mm thick rubber sheet to increase the thickness.
The texture is good, but I wanted a Fork Cramp that would work with the Φ48 Front fork.
View detail
GALE SPEED Rear brake master cylinder
I was disappointed that Attachment was not included in the package.
The response was good, as they returned Gold immediately after I told them about the situation.
I purchased the PartsShop exhibit in time for my scheduled Touring, and I felt that the Rear brake was easier to operate with more Stroke than the NORMAL.
View detail
GALE SPEED Sam Brake master
The installation process is extremely difficult because of the wiring around the handlebar, the brake hose, and the interference between the various parts.
I considered various options with Thumb brakes, but I liked the fact that they are less expensive than acosat, etc. and have a similar shape to brembo.
View detail
GALE SPEED Straight Nipple for Master Cylinder
The Nipple that comes with GALE SPEED's Rear brake master and Thumb brakes is L-shaped, so it was able to alleviate the forced bending of the brake hose. View detail
Wire clutch with comfortable grip
[How is it used?
Used for about 200 km on touring after installation.
Was the one you received as per Image?
Street Image
Was the installation difficult?
The clutch holder itself is easy to fix with Bolt.
The OEM of the MT-09 cannot be removed without removing the Grip.
Slotted screwdriver because the grip heater does not expand and contract.
I couldn't remove the OEMHolder with a Gold saw.
Also, I have been informed that the Clutch switch can be diverted from the OEM
It does not require processing.
I could
How was your experience with it?
I used the same 34 as OEM for now.
MT-09 is originally light on clutch thanks to AssistSlipper clutch
However, GALE SPEED's clutch holder has a bearing on the pipod.
The fact that it has a "Smooth" grip makes it very comfortable to hold. Also, the Lever's
It is very high quality with very little vertical rattling. This was my first luxury Clutch.
I'm very happy with it
[Included Parts:were they on?
Clutch switch and terminals were included but have not been used.
[Was there anything that disappointed you?
None
Note that the clutch holder clamp is supposed to be tightened to 12 Nm.
Are there many accidents of over-tightening? I tightened it by hand feeling, but so far
No problem.
View detail
![[TYPE-R Rear] Forged Aluminum Wheels](https://img.webike-cdn.net/catalogue/images/59065/typer_03_TS.jpg)
good
It is cool that the rear 190 tire can be worn because of its presence and large size.
It will be harder to turn, though.
It is also well made.
View detail
Fits: KAWASAKI ZZR1100 D, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZZR1200
good
It is lightweight and Brake works well.
Cool
Presence.
View detail
Gale speed sprocket for my DRZ
These sprocket only fit on gale speed wheels. Looks funky in the package as I have not use any sprocket in steel colour before. But it looked clean as fuck Couldn't upload photo sadly View detail
I use it because it is an exclusive product.
I purchased this as an update to Bolt after changing the number of pins for several times.
Since the recommendation is just to replace it with a new one, we purchased a dedicated product since it is also an important component.
I think reliability is more important than performance for this type of product, so I thought I should spend the cost for my own safety.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS SE
GALE SPEED Elaborate
About quality and texture Good texture, five-axis cnc process About the use experience Comfortable angle for quick position adjustment Products purchased together No Installation difficulty Moderate difficulty, can be installed by yourself Cost-effectiveness and comparison with other products Very cost-effective About shipping and packaging tight packaging Any concerns, cautions or advice when purchasing no suggestion View detail
![[TYPE-R Front] Forged Aluminum Wheels](https://global.webike-cdn.net/uiu/impression/202210/11_1022629_63452a40c92ba.jpg)
Fits: KAWASAKI Z900, KAWASAKI Z900 SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
TYPE-R
About quality and texture Very good texture, the glass coating works well About the use experience The downturn is faster, I love the look Products purchased together back pedal Installation difficulty The difficulty is high, it is recommended to go to the repair shop to install Cost-effectiveness and comparison with other products Very cost-effective About shipping and packaging well packaged Any concerns, cautions or advice when purchasing The hub does not include a valve, please note View detail
![[TYPE-R Rear] Forged Aluminum Wheels](https://global.webike-cdn.net/uiu/impression/202210/11_1022630_63452bde77852.jpg)
Fits: KAWASAKI Z900, KAWASAKI Z900 SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
TYPE-R
About quality and texture Good texture, good decontamination effect of glass coating About the use experience Much lighter than the original wheel, the descent speed has become faster, I like the appearance Products purchased together back pedal Installation difficulty The difficulty is high, it is recommended to go to the repair shop to install Cost-effectiveness and comparison with other products Very cost-effective About shipping and packaging well packaged Any concerns, cautions or advice when purchasing Please note that the hub does not contain a valve View detail