Reviews
Helmet lock
Installation is easy
Even at touring destinations, it was inconvenient to remove the Seat and put on the Helmet NORMALSpec. so it became convenient.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
It's perfect
We had a Dealer install it on a BMW R1250R in 2023!
The labor cost was 1,650 yen.
Very useful.
View detail
It is easy to install.。
You only need one Hexagonal Wrench to install it, just apply Screw lock and tighten it. I always buy helmet locks from this manufacturer because they are inexpensive and the quality is very good. View detail
Postscript to postscript!
You probably think that a helmet is something that someone else is using in direct contact with your skin, and that there is no reason for someone to steal such a thing. The idea of a thief is that he/she wants a helmet for a Tandem person. So don't think that because the helmet is large, it is durable or that the probability of it being stolen is low. View detail
Postscript.
In my opinion, the screws of this Helmet lock are Large, which is an oddly soft material. In my opinion, the screws that fasten the Helmet lock are Large and are made of an oddly soft material! Therefore, it is safer to work with caution and take it easy or Shop.
Helmet locks themselves may be inexpensive, but helmets are expensive, and if they are stolen, you will not be able to get back on your motorcycle.
View detail
Ease of use unique to Exclusive Design
[How is it used?
RC42 has a Helmet holder if you don't remove the Seat.
It was inconvenient when I was on the road because I could not use it. I was looking for a product that was easy to use, and I found this product and purchased it with high expectations for its exclusive design.
Was the one you received as per Image?
Almost as per the Image.
Was the installation difficult?
Installation was very easy!
The only tools used are +Driver and 5mm and 6mm Hexagonal Wrench.
How was your experience with it?
Balance varies slightly depending on the type of helmet.
It is a Level that is not a problem.
[Included Parts:were they on?
The key is Quantity:Includes 2pcs. Includes a helpful Instruction Manual.
[Was there anything that disappointed you?
None in particular.
View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
No need to worry about food while touring.
I used to hang my helmet on Mirror when I took a break during touring. I was worried that it might be stolen or fall off, but now I feel safe! However, I am worried about rust because the material is steel. It is easy to install and just fits. View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Without removing the Seat.
I like that it can be attached to Handlebar.
No need to remove Seat.
View detail
Very easy to use
I was looking for something that I could use for my vehicle, which had fallen out of the lineup. I was looking for something that I could use for my vehicle, and although some modification is required, I was able to install it without any discomfort. I recommend it. View detail
Wow
Super super fast delivery. This the 3rd or 4th I have ordered (I have owned several Zx14r's and they make good gifts). They fit perfect in the slot. Factory look. First I take the lock to a local locksmith to have him match the key to the ignition key, 10 min and 10 dollars. Bradley needed item on the otherwise perfect bike. View detail
As if OEM Parts
[How is it used?
Is it normal for Austrians to carry a Helmet when they get off their Motorcycle? Or is it the result of a thorough pursuit of weight reduction? The answer is a mystery, but as a Japanese, it is inconvenient for me because KTM motorcycles are not equipped with a helmet holder as a standard equipment. That's where our KIJIMA-made helmet holder comes in!
Was the one you received as per Image?
Bracket that looks like it could be made by yourself and Quantity of Universal Helmet HolderBody:It is a Set product. But if you make it yourself, it is troublesome, so it is faster to buy it. (Lol)
Was the installation difficult?
The OEMBolt is tightened so firmly that it is difficult to remove the Tandem FootpegBracket. After successfully removing the bracket, apply Screw lock fluid to the Bolt supplied with the product, and tighten the Bolt in accordance with the Instruction Manual to complete the installation.
How was your experience with it?
Convenience is the only word that comes to mind.
[Included Parts:were they on?
A special Bolt and Spacer are included. And KIJIMASticker as a bonus.
[Was there anything that disappointed you?
In case of installing Shoei's Z7Helmet, when hooking the D Ring to the locking part, it is a little troublesome because it has to be operated in a small space.
Other items that would be helpful
Availability and clarity of Instruction Manual:The work procedures are easy to understand because they are explained step by step with drawings with pictures.
Items to buy together:Screw lock liquid
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
KIJIMA Helmet lock installed on Z125pro
[How is it used?
Fitted to Street and TouringMotorcycle
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was not difficult.
How was your experience with it?
This Motorcycle has a jOEMHelmet holder under the chair, but it is difficult to use. This makes it easier. even though it is an Other Brand Product, the quality is good enough.
[Included Parts:were they on?
Key is Quantity:1 Set of 2pcs. with KIJIMA's Smallest Sticker (I think).
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Instruction Manual is included. There is no problem if you follow the instructions. The bolt to be attached to the car body was purchased separately to prevent tampering. The available bolt standard is a little longer than the supplied one, so I added thickness to the body with a washer I had on hand.
View detail
Rear Sets are removed and Helmet is fixed...
I purchased this product because of the difficulty.
To install, simply remove the Tandem FootpegBracket and secure with the included Bolt.
It is easy to install. and no practical problems.
View detail
Made by KIJIMA!
I purchased a Helmet lock made by KIJIMA for peace of mind.
I highly recommend this product because it is Simple and SMART to install.
In the case of RC390, it is simply inserted between the Left Side Tandem Footpeg and the Frame.
Since the bracket and the locking part are separate parts, and the locking part is fixed only by a protrusion and Plus screw, it is recommended to apply screw lock agent to the screw part.
The feel was very good, and although I was concerned that it might hit my feet while driving, I had no problems.
View detail
This is a standard external helmet holder for BMW.
I bought this for my BMW G310GS, the same manufacturer as the one I installed on my R1250GS, so I had no hesitation in purchasing it. There is no specification on how much torque to apply, so I tightened it to the point where the body would not rotate. It is very convenient to have it when you have luggage in the Pannier. View detail
It is not Standard Equipment.
Easy installation by tightening Screw1pc. with Phillips Screwdriver
I use it depending on the situation, not on this product, but on the fact that if the chinstrap is cut in the first place, it is the end of the story.
I don't want to hang it on the Mirror or Handlebar or drop it on the Seat, so I'm satisfied that it serves its purpose.
View detail
Good product
Installed on a 2018 Bonneville 120.
I really wanted to mount it on the Left Side, but the Side bag support makes it difficult to use. (Can be installed) The right side of the camera is mounted on the right side.
I think that the feel of operation, etc. is fine and not too large.
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Installed on ADV160.
Installed on ADV160.
I decided on this type because I have luggage in the rear box and under the seat, so I wanted to have other storage for the helmet.
The Handlebar area fits into the Refreshing because it is co-packed with the Master Cylinder.
However, it is a bit cumbersome to lock and unlock because of the Smart key, although it cannot be helped.
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
Easy and convenient to install.
I bought it because the Helmet lock is complicated by the method of removing the Seat.
In the Instruction Manual for handling, the screw is used to remove the bolt, but the final model is a bolt, so I was in a hurry for a moment.
Screw size is the same, so installation is not a problem.
It can be installed by an amateur with ordinary tools.
It was a good decision to install it because it is made by KIJIMA, so it has a good quality and usability.
View detail
Fits: YAMAHA YZF-R3 ABS, YAMAHA MT-03, YAMAHA MT-03 ABS, YAMAHA MT-25, YAMAHA MT-25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25 ABS, YAMAHA YZF-R25
OEM Product?
It feels like an OEM Product. Installation was a snap with just a bolt.
I would like Holder to be Standard Equipment.
View detail