Reviews
Fits: KAWASAKI NINJA 250
Mounted on EX250L
It is for the current NINJA, but the thickness is 7mm different from the previous EX250L (1pc.) and OEM, but it went on relatively easily.
I have only done a 40km test run around town with the old Crab installed, but there doesn't seem to be any problems.
I think the thickness increases the strength of the product.
Things are good.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Low price, but not bad.
Brake PadsThe outer circumference needs to be shaved a little less than 2mm, but much better than OVER's 4mm.
The construction is more delicate than the OVER ones, but there seems to be no problem.
View detail
Fits: HONDA Rebel 500, HONDA Rebel 300, HONDA Rebel 500, HONDA Rebel 300
ABS error.
I bought it from a private importer before WEBIKE handled it.
The ABSSensor warning light always comes on around the 100 km/h mark.
It seems that the ABSSensor mounting position is gapped enough to be visually confirmed.
I ended up replacing it with OverRACING's (or rather waiting for it because I was on a production waiting list and couldn't get it) and the problem went away.
View detail
Pre-roadADJ by FFork at a great price
[How is it used?
WR3 Pre-roadADJ Gold
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
NoseDive could be suppressed.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Unsuitable for amateurs of maintenance Su Kill.
Other items that would be helpful
More cost-effective than the expensive YSSInnerSpringKit.
View detail
Recommendation of otherManufacturers, even if expensive.
It looks there, but it comes off easily by hand even if it is fitted in.
Other Manufacturers have Quantity on the reverse side.:Pair (for Left and Right) The shape differs in the following two cases, but this is the same.
So I think the hooking is not so good.
If the gold price were lower, it would be acceptable, but since the price is so high, it would be better to pay a little more and buy another Manufacturer.
View detail
Fits: YAMAHA YZF-R15, YAMAHA XABRE, YAMAHA XSR155, YAMAHA V-IXION R155, YAMAHA MT-15
This is for 320mm Rotor.
It was for 320mm, but the Rotor I chose interfered with the Caliper. I had to shave off the part where it hit.
To begin with, the XSR155 Big rotor is not available without importing it, so you need to be prepared for a lot of things.
The details are on YouTube. We hope you find it useful.
https://youtu.be/myATZbuZZe8
View detail
In case you are interested in IndonesiaSpec.
Installation
Clutch Side can be easily popped on if the OEM can be removed.
Brake Side is quite Large strange to remove OEM
The part connecting the brake and brake cylinder did not go all the way in, and it also got stuck in the middle.
If you turn it and pull it around, you can make it work.
BrakeSensor cannot be attached, so I hid it out of sight.
The Exhaust Bracket position in question is too different and does not arrive.
I bought Bracket and plan to wear it somehow!
It is a recommendation because the Position is easier to ride and the Shift height can be adjusted.
View detail
I don't know if it fits.
I installed it but there was a gap between the Inner Fork as shown in the photo. View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX300, YAMAHA XMAX300
Costa is outstanding♪
I wondered about this product since it was only available on Webike. I wondered how it would be, but it turns out that Material is Material.:The price was the cheapest among other XMAX Fender Eliminator kits, but considering the functionality, I think it is the most cost-effective. I would have given it a perfect score if it came with a … light, but I used one from another License Plate Kit and drilled a hole to attach it, but it's aluminum, so drilling is easy, and I gave it a perfect score. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja 250R
WR3RearCaliper-support and bremboCaliper
The brembo Crab type was purchased from Webike and installed by STRIKER in Tsuki Ward, Yokohama City. The length of the brake hose was carefully considered and the installation was very beautiful. brembo and WR3 are very compatible. Please be careful when selecting the length of the brake hose. View detail
Fits: YAMAHA YZF-R15, YAMAHA YZF-R15, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XABRE, YAMAHA V-IXION R155, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XABRE, YAMAHA V-IXION R155
Mr. BigRotor? Missing?
When actually installed, the Brake Pads are not aligned enough to hit the Brake rotor.
If it was a BigRotor, it would work, but did I receive the wrong one for the BigRotor? I bought a brembo compatible Caliper from another place and it was useless.
View detail
It's all about feelings!
[How is it used?
I purchased this product to install on my WR155R.
Was the one you received as per Image?
The product arrived exactly as shown in the picture.
Was the installation difficult?
Since the instruction manual is not included, I looked for a video of it being installed overseas and put it on.
As shown in the image, once attached, it is removed.
All air cleaner boxes are also removed.
Remove the duct attached to the box by peeling off the adhesive with Cutteretc.
Insert this product from inside the box, attach the manifold, and attach it to the Throttle body.
I see that the OEM Duct has what looks like an Air Chamber. I wonder if it is there to secure the capacity because of its length.
Material:Since it is Stainless Steel, it makes sense that it would not deform under pressure.
The joint with the air cleaner box should have been cured with Sea Ring material.
I didn't have any, so I covered it with something I could glue on as a substitute.
The process is easy, but it took a lot of work there.
How was your experience with it?
I honestly don't know!
OEM is Material:I wonder if this is a product made of Stainless Steel as a countermeasure against deformation under pressure, since it is Rubber. I think it is a product made of Stainless Steel as a countermeasure against deformation when pressure is applied. It is not particularly fast.
I wonder if the intake air is now more stable when the throttle is opened and closed. It is about the same.
More importantly, I'm surprised that Sponge had more on top of the Air cleaner!
In this case, I left it back in to see the difference.
We consider it as a PARTS of your feelings.
[Included Parts:were they on?
Sticker
[Was there anything that disappointed you?
I want the Instruction Manual!
View detail
It is lightweight, but…
Since the kit itself is aluminum and of small type, it is quite light and has a good design, so I am satisfied with it as a kit.
I was thinking of using OEM parts from Blinker to License Plate Light, but it seems that it is not possible to use them by simply installing them.
The angle of the license plate is not bad, and the kit can be installed without any problem.
The finish of the parts are made in a foreign country, and there are some scratches due to insufficient packaging, but once installed, they are not noticeable, so I was able to cover them up with the enclosed Sticker and forgive them. (Lol)
Overall, I think the price is a little high for such a small amount of content, but depending on the customization, the Rear O-Bar handle portion may be finished quite lightly.
It is not easy to find vehicles that have them installed, and most importantly, they are lightweight, so I plan to install them in a planned manner while having a lot of fun.
View detail
Aligned with the color of Chain.
I made it Gold to match the color of Chain.
I am satisfied with the change in appearance more than I expected.
View detail
WR3-Lowering-XSR155 2cmDown.
I bought it for 5cm lowering, but it is not effective because the installation pitch is the same as that of 2cm Down Link. View detail
Instruction Manual not included.
The lack of an Instruction Manual makes installation a little tricky.
Holes in DURACON are smaller than those in Bolt, so drilling is required.
Because the amount of threading on the Hexagon Bolt is small, the screw cannot be tightened enough and the slurry sleeve becomes free, so it is necessary to prepare a separate bolt with all screws.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA XSR155, YAMAHA YZF-R15, YAMAHA YZF-R3, YAMAHA XSR155, YAMAHA YZF-R15
Cannot be installed on XSR155.
Cannot be installed on XSR155.
You can win products for Handlebar Bracket.
View detail
Works great
Honestly, they're pretty good-looking in my opinion while working as expected. I changed from a non-rotating and plain steel spool to this and it looks much better. Definitely recommended. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja250R
Brembo crab caliperSupport
I was able to install it on my ninja250R without any problems. View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
It was impossible to tighten as shown in the picture.
Bolt to be tightened or Washer is missing View detail