Reviews
It's solid.
We decided to replace the 3-pole and 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since I did not touch the body side, I purchased only the female coupler without the terminals, so I also purchased these terminals. All you need is 1Quantity:2pc. I had only a set, but I thought I didn't need a lot of it, since the price was so high for a small number of items, but it was a good value for money.:I chose this one with 1 Set of 100pcs.
As for the product, although some of the bends were not so good, it was firm with appropriate thickness, and it fit into the coupler tightly.
There are still quite a few of them left, but the 110 coupler is used in various places, and there may be times when you want to modify it, so if you have it, it will come in handy sooner or later.
View detail
Not bad at all
I was looking forward to get some quality terminals .so I finally found it . thickness of the female terminals are very normal compare to the male terminals .overall product is good this spade terminal connectors are damn good .quality is superb .no need to crimping so hard .highly recommended. value for the money. View detail
there's one in the family
I bought this for the Wiring process of my home Motorcycle.
Bullet Type Terminal etc. can be different in size depending on the manufacturer, so I buy them each time.:If you have a Set, you can do Wiring processing.
I have used it for a variety of purposes, including installing a Sub computer, Oil Temperature Meter, Water Temperature Gauge, and Other Brand Product's Blinker, and I have no complaints.
It can handle a wide variety of wires, from very thin wires to thick wires.
When I crimped the Bullet Terminal, there were times when it stuck to the Electric Works Pliers side, but it came off easily when I applied a thin layer of oil to it.
Some people often use Electro Taps, but they tend to cause poor contact, so the Bullet Terminal process is more reliable.
In particular, since the effect of vibration on the motorcycle is large, the Electro Tap, which is heavier, pulls on the wiring and makes it easier to break the wire.
I use bullet terminals for all the connections that cannot be couplt-on, because they are capped for waterproofing and easy to remove.
View detail
It's cheap, so it's safe to buy it together with Coupler.
I bought a Connector set to change the Blinker on my KLX230 to Other Brand Product, and I'm working on the conversion.
When I pinched the last 1pc. with Crimped Pliers, the terminal was broken!
I couldn't even reuse the parts, so I ordered these Repair Parts in a hurry. The work was completed successfully.
It's a crimping process that I've done many times, but there's a rare chance that some combination of factors could cause an accident.
When you buy a Connector set that you don't have a spare for, you can order it along with it so that you don't have to worry if something goes wrong.
Quantity:1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs. 1 Set of 3pcs.
View detail
090 type terminal for Coupler
I bought a Male to get power from the FrontServiceCoupler- on my PCX150KF30.
Type 090 terminal.
There is no problem at all to install and energize the Wiring.
Waterproof Cap and Terminal are Quantity:There are 10 sets in the package, so it can be used as a spare.
View detail
Amon terminal set . useful
It's really helpful what are the basic item need for specially who doing DIY projects in automobile.Items quality good and along with tidy box . reconditioned . Thank you. View detail
Amon Male female character connector
Super quality and good price .even can use 0.5-2mm cables without braking crimping mouth.iron material also strong.highly recommended.thaks View detail
Simple functions
It is the switch of the simple function of only On and Off that omits an extra function. It is a switch that is easy to handle by DIY because the circuit is simple because it is only the switching function of the On and Off of the electric equipment. The appearance is also very simple. View detail
Different colors.
I bought it because it looked like Gold in the picture, but it was actually Silver.
The Bullet Terminal of Goods that I bought at the same time had the same color tone and was described as Gold, so I thought this one was also Gold, but it was exactly Silver. It is very confusing and I would like to have it replaced with a Gold one if possible.
Also, if there is going to be a mistake about the color, I would like it to be clearly stated in the product description.
I was going to work on it today, but now I can't.
I will give it the lowest rating.
View detail
be of a different diameter
Silver arrived, but because the diameter is Large than the GoldPlating article, when the GoldPlatingBullet Terminal of Male side is inserted, it is loose.
"*There may be changes to the product specifications due to manufacturer reasons. Is this what the warning is about?
Or was the diameter of the Bullet Type Terminal different for the Manufacturer from other Manufacturers before this?
View detail
SilverPlating has arrived.
I received the SilverPlating one, which is different from the product picture.
The finish is good, but the Male terminals I bought with it were GoldPlating, so they are not aligned.
View detail
Convenient to sell by 1pc. unit
The ability to buy by the 1pc. unit is revolutionary, and it's convenient to buy as much as you need.
The packaging is also easy to handle as there is no extra paper Tag or Stapler.
It's also nice to pull out and have a moderate Click feel.
GoldPlating seems to have good conductivity.
View detail
Storage Precautions
The Bullet Type Terminal doesn't have any Malle. That's because most of the terminals on 6v MONKEY/GORILLA Main Harness are Female, and you need to remove the male part of the terminal.
However, if you put on a suitable cheap one, it can be a direct cause of leaks and shorts at worst, so you need a solid one.
Emon's Quantity:The Set is great because you get a lot of Males, but the downside is that there are far too many to use for one or two motorcycles to be repaired or customised.
You also need to be careful about storage. It's really hard to get a handle on it when it's blown up in the toolbox.
View detail
Useful to have but the price is Neck.
Because I often use WaterproofConnector to make wiring, I buy this as a spare.
The price is quite high, but it's a Recommendation because it can be used for the Coupler Wiring process of the Waterproof system.
View detail
It's an itch I can scratch Target components
For the GSX-S125's Attachment power supply, it is used in conjunction with the Failure Diagnostic Connector to I bought this Connector to pull it in
(Take the Yoshimura's Temp meter power supply out of this Connector)
So-called 090 Water-proof type of terminals and general 0.5sq Response
Quantity:1 Set of 10pcs. so there's plenty of room for failure to a certain extent, and if there's any left over, you can save it for future use The amount that can be kept
The product name is Quantity:Set, but this is just a "Terminal + WaterproofRubber That means
Hence the "Male and Female Quantity:Please note that it does not mean "Set"
(Specify "Male" or "Female" at the time of purchase.)
And, of course, just because you bought this "With a pong is not possible
Crimp work using Electric Works Pliers is required, so this point Also note
View detail
![Connector [for Business Use]](https://global.webike-cdn.net/photo/impression/3d/3db044ceb446b75f1d0a73978ebcc8c5L.jpg)
Please note that terminals are sold separately
Purchased for use in Attachment Electric Wiring
You can buy them in a pack of 10 at a discount, but the terminals (Bracket) are sold separately
If possible, the terminals are also Quantity:I'd like to have it set
View detail
You can't keep it on
When putting on the Bullet Terminal, the Wiring with Plus flowing from the vehicle is not a good idea It is absolute to bite the Female
Cover will cover the entire Bullet Terminal area Short-circuit This Cover is an absolute necessity for that
If you don't want to burn it, buy it if you don't want to move Wrecker
View detail
Male, which tends to be in excess
I stopped buying them It's inconvenient if you don't have it when you want to use it
If you have a lot of them, you can cut off the head part and use it as a branch like a price handy
(Like the world, it's easy to have too many Males, so I cut off the firing part of the Male.)
Size may be a little small, or it feels loose when you match it with the OEM Harness
View detail
There is no grief if it is prepared
I've been buying them in small quantities, but I bought them in a big way
You can crimp it nicely, and you can cut off the head and cut it off like a splice and make it into a branch I use it and so on
I think it's a little thin, and it's tight on the OEM Harness plug
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
I am satisfied.
I bought these to install an external blinker Initially, Male?FemaleQuantity:I bought the Set one, but it broke off when I crimped it and I bought an additional one, just for the Malle I should have chosen this one from the beginning because it was good It's good because it's difficult View detail