Reviews
sr400Final cannot be pontooned.
I saw an article on webike about converting sr400's headlight to LED and bought it.
I thought it was supposed to be able to be popped on, but it was not, so I checked the manufacturer's site and found that it was not possible because the pedestal did not fit. I was not sure enough, but I would appreciate a more helpful article.
For the time being, I want to shave the pedestal to make it fit, although it was a little forced to install it.
Now we just need to hope that durability and vehicle inspections will not be a problem.
View detail
Bright!
Very bright.
I did not take a picture before the replacement, but it is brighter without comparison.
I installed it on my MT-07 and had no problems.
I think the work will proceed Smoothly if you read the instruction manual carefully.
The back of the Headlight is very narrow, so care must be taken where the Unit is mounted.
I am a little concerned about the waterproofness of the unit's wiring inlet/outlet, as the rubber seems to be floating.
View detail
Sphere Light RISING? Installation
As soon as the car was delivered, the position lamp was replaced with an LED bulb.
Replaced with Sphere Light RISING?
The waterproof cover must be partially cut off to fix the cover in place.
How was your experience with it?
It was bright enough to be brighter than the LED headlight I had on my last GSR400.
The light is brighter than I expected and there is no cutline. There was no need to adjust the optical axis after installation.
I sometimes drive at night on my way home from work, and the bright lights are more likely to come from the shoulder of the road.
Because we have experienced dangerous situations in the past, such as vehicles suddenly entering the roadway.
The headlight was made clear and bright, and the exhaust system was changed to make it easier to be noticed by nearby vehicles.
We have always replaced the unit with a new one, as we do every time.
[Was there anything that disappointed you?
I think the highest price is the neck of the matter.
View detail
aprilia rx125 for the 2022!
I installed it on an aprilia RX125 2022.
It is brighter than OEMHalogen and provides increased visibility and peace of mind at dusk and on cloudy days.
Even a novice mechanic should be able to replace it in 15 minutes, but because the wiring near the coupler is short, please work three times more carefully than you imagine.
The White Plastic Cover is attached to the base of the Valve at the age when the Valve is to be inserted.
The small screw threads on the valve interfere with each other in two places, so if you shave about 0.5mm off the plastic cover hole in the white plastic with Fileetc.
Glad I switched from OEM Halogen lights!!!!
View detail
On the SR400, it is a fairly aggressive installation.
I installed it on SR400, but the housing is a tight situation and it is a Chica la technique.
Perhaps be prepared to break the LED side when removing it.
Once installed, the brightness, etc. is as expected and perfect.
View detail
still bright
I could have tolerated the OEM headlight bulbs (H7), but the recent trends made the switch to LED the right choice. View detail
It got brighter.
OEMHeadlight Bulb (H9), I felt that it was a bit brighter there, but I was still satisfied with the LED look and Large. View detail
bright
I use it for a position lamp and it is much brighter than the NORMAL lamp.
The white color is very bright and cool, and since it is LED, I think it is very durable.
View detail
Used in RACING vehicles
Puncture was done by Regulator since it is a RACING vehicle and security parts etc. have been removed.
This resistor is attached to the Wiring of the lights to release electricity.
Regulator load has improved.
View detail
Visibility was good and no malfunctions were encountered.
Please try at your own discretion, as the Instruction Manual includes methods of description that are not included in the manual.
Installed as front blinker on CB650F.
It is a normal 2-wire, so if you install it as it is, it will not light up the Position.
We confirmed that all six bulbs light up if about 8V is applied, so we set up a position step-down circuit (about 10V) to light up all six bulbs.
Position lights were also turned on.
It has lasted a little over a year without any breakdowns.
Vehicle inspections were not a particular problem.
The brightness is quite different between the 10V that was used to light the position light and the 14V or so that is used to light the normal Blinker light.
I was also pleased to see that the light and dark were separated in an OEM-like manner.
Even without position lighting, the product is highly visible and is highly recommended.
View detail
![LED Position Bulb LEONID LED T10 EX [Sphere Light].](https://img.webike-cdn.net/catalogue/images/35754/shlet10ex-2_01_TS.jpg)
Match with the same Manufacturer
We also replaced the parking valve with an LED headlight bulb. It was a good decision to choose the same manufacturer for the color. View detail
Easy LED conversion without modification
[How is it used?
Replacement for 35/36.5w Halogen Head Light
Was the one you received as per Image?
It was just like the picture of the product.
Was the installation difficult?
I had to replace the entire unit from a different standard headlight, so it was a bit of a hassle, but if the headlight was originally an H4, it should work just by replacing it.
How was your experience with it?
I often drive at night, especially in mountainous areas where there are few street lights, but after the replacement, I can drive with peace of mind.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I wish it had the Halogen color (3200k) that God of thundergu 2 has.
View detail
Bright ~.
I saw it at the Motorcycle shop where I work for another customer and asked him about it. I've put them on a few cars, and most people are happy with the brightness and no problems." So I bought one myself.
I had all the tools to a certain extent, so I replaced the Valve myself, but there was no special difficulty, just a simple change of the Valve.
I rode Motorcycle to work today and rode back after 10pm and it was so bright.
I was a little concerned about the shadows that appeared depending on how the light hit it, or that it did not shine evenly, etc., based on other impressions, but the Light on my Initial Model MT-09 was Large and sturdy.
View detail
Fits: SUZUKI BURGMAN200(CH41A), KAWASAKI Versys650(JKALE650), SUZUKI GSX-R1000 (GT78A), SUZUKI GSX-R1000 (GT77A), SUZUKI BURGMAN200(CH41A), KAWASAKI Versys650(JKALE650), SUZUKI GSX-R1000 (GT78A), SUZUKI GSX-R1000 (GT77A)
Poor accuracy
I bought two of them to install LED Bulb, but the size of the product is RoseRose and the accuracy is not good. View detail
LED Blinker for SPHERE LIGHT Motorcycle
[How is it used?
I've used it before.
Was the one you received as per Image?
The texture was good, but the size was larger than expected.
Was the installation difficult?
It's relatively easy, but it depends on the type of car.
How was your experience with it?
I think the quality is good.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It was larger than expected.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you want an inconspicuous blinker, you should buy one from Kellerman or KIJIMA.
View detail
Reliable JAPAN
I bought a used 2nd generation GSX1300R Hayabusa that had HIDs on it. "The time has come for LEDs!" That's why I bought a new one.
Installation was super easy, on the contrary, removing the HID Wiring was Large strange.
The only thing I didn't like was the connector part, it was only a flat terminal and not a connector shape. I plugged the terminal into the connector of the car Both Sides, wrapped tape around it, and was done.
If you're claiming to be a "JAPAN" company, you should have done better.
The key performance is perfect. It's bright enough and the cutline comes out well. On the other hand, I had the impression that it was hard to see dark areas because the light and dark were too drilled.
I brought the car in for inspection without any problems. I was a bit nervous because I had experienced some painful experiences with Chinese products, such as failing due to insufficient light intensity or not passing due to blurred optical axis, but it passed easily. (I went to the Tester shop to adjust the Light beforehand.)
It is certainly more expensive than Chinese products, but the performance and peace of mind are worth it.
View detail
No problem with the inspection. [Color] Clear！！
The zzr1100 is said to have about as much headlight as the original.
So I replaced it with an LED headlight bulb.
It looks 20% brighter than the OEM Halogen bulb.
On long tours, it's not uncommon to see the sun set.
It's been a great help in keeping the road well lit!
And the all-important vehicle inspection.
No problem, just adjust the optical axis. [Color] Clear.
According to my favorite motorcycle shop.
More than Multi Reflector Headlight
Wouldn't a headlight with a cut lens like the zzr1100's have less light dispersion and be easier to pass inspection?
He said.
It may vary a bit from inspection station to inspection station, but I've had no problems at all so far!
View detail
Safe to drive at night
[How is it used?
Whenever I go out to play in the woods, I always come home from my friend's house in the dark.
Even if I use Other Brand Product's Halogen bulb, I still feel dark, so I changed to LED bulb.
I decided to change it and bought this one.
Was the one you received as per Image?
It is a Package that is put together in Compact.
Compared to the Halogen bulb, the Gold bulb seems to be a little heavier.
How was your experience with it?
It is brighter than Halogen. The balance of the light distribution is good and it illuminates beautifully.
I have Smoke Shield on mine and it looks bright even with Smoke Shield on.
You can drive safely on the road at night.
[Points to note]
Depending on the shape of the Light and the type of car, there will be Rose variation.
Be sure to check the optical axis after installation!
How did it compare to other products?
It is much brighter than Halogen bulb.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Because the terminal part and the Coupler seem to be damaged when removing it tightly, I am the terminal part for the HeadRide.
Contact Grease is applied to make conduction Up and Coupler easy to pull out.
View detail
Now on the Low side! I bought Repeat without hesitation.
[How is it used?
I decided to replace the HIDs on the low side because they were not working properly and were not lighting up when driving.
Because I was satisfied with the performance of the God of thunder G that I installed in the High side before, I changed the Low side as well. Because I was satisfied with the performance of the Low side, I exchanged the Low side in the same way.
Was the one you received as per Image?
As per Image.
How was your experience with it?
The ZX-14R is a ProjectorLamp, but the light output is sufficient and the light distribution is not bad.
I have selected 6000K color and I like the Neutral White color.
It is easy to install and only requires a basic Coupler connection, and the Controller is also a Small Type, so you don't have to worry about where to install it.
[Points to note]
In order to adjust the light distribution, the lamp body and the base part are designed to rotate, and are fixed with the eye Screw.
The product that I got this time was not so, but when I bought it at Low side before, the eye screw was loose, and it was not able to be fixed tightly, so I think that it is better to confirm it just in case.
How did it compare to other products?
I considered other products, but this product has a good reputation for motorcycle use, and the fact that it was the most compact product that could be installed on the high side of my 14R was the deciding factor in my purchase.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I'm worried about the optical axis.
NORMAL is dark, and I changed to LED Light this time. At the time of the exchange, Light was able to remove 2 screws easily, but after that Valve was not able to be removed easily, and it finally came off while prying. The installation is completed if it fits in there because the mold is decided. I don't know the change because I haven't ridden at night yet, but the color of the light which I saw in the daytime was obviously changed from yellowish color to white color, so I want to expect that it is changed. Now I am worried about the light axis. View detail