Reviews
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
Something to have on hand to help in an emergency.
Used for hose of RadiatorReserver tank.
I originally purchased it for that purpose, but when the Fuel Hose died due to deterioration on the road and started leaking fuel, I used this one that I happened to have with me for emergency treatment.
Since Universal is expensive in terms of size, it would be a good idea to buy one for a processing base for now.
View detail
Fits: HARLEY-DAVIDSON Mainly used for oil lines.
Fuel line, this is the only choice.
Don't use hose, which is quickly altered by UV light, heat, and fuel, and should be replaced when it leaves a clear mark on the clamp. It is still convenient, although there are few opportunities for immediate delivery at Webig due to the spec. on the order. View detail
Classic look, I think the quality is good
Installed on Yamaha SR500.
Fuel Cock before replacement (Manufacturer unknown Other Brand Product) worked hard for about 15 years, but when I rode it for a while, it started leaking.
This time, we chose this Fuel Cock, which is handled by DAYTONA and has high reliability.
The look is classic, the lever operation is very light, and the installation was fairly normal.
I can recommend it
View detail
สวย ใช้งานได้จริง ตรงรุ่น View detail
I appreciate the ReserveCook.
There is no Reserve in RigidMONKEY or 4LMONKEY's Normal cook.
In the past, I had to go to the trouble of replacing the cook's mounting part with M14 to install a cook with reserve, but this cook can be installed as is, which is a big help.
Especially in the case of 4L, the normal cook is downstream, so if the carburetor is PC20 etc., it will interfere with the cook.
However, this Cook is a Right out, so I'm going to make that point. [Color] You can Clear.
I don't have any problems with installation or usability, but I don't like the fact that Packing is so poor.
Gasoline may leak if it is tightened a little too much.
Nevertheless, I appreciate ReserveCook.
View detail
MONKEYCarburetor/Drain hose
[How is it used? Overhaul of MONKEYCarburetor, repair of oil leak, replacement of hardened and cracked tube due to deterioration.
Was the one you received as per Image?
It is soft, durable and looks much the same as OEM.
Was the installation difficult?
Just cut them to length.
How was your experience with it?
It was soft, easy to use, and easy to install.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
As expected.
Point of installation and hang/.
Each hose of MONKEYCarburetor has a different size. the part of Drain that drains oil has a size of 3.5×7.5.
View detail
Hose connecting MONKEYCarburetor and Tank
I thought the cause of the oil leak was packing, but the hose connecting the tank to the carburetor also had a little tear due to deterioration. I was not able to find an OEM hose, so I purchased this product.
The Sizes of other Hose in Carburetor are different from each other in size at each location.
Hose connecting Tank and Carburetor was this product (4.5×8.5).
The quality is good, durable, soft and problem-free.
View detail
It is a good item
No fuel leaks and very pleasant, it is painted in color and has a nice texture. View detail
Fuel fliter
I bought this because I frequently get Garbage in my carburetor and it clogs up frequently! 。
The installation was easy and the filtration was good.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900)
Used for Z750four
I purchased this to change the location of the Overflow hose that was previously attached.
I had previously purchased and installed a PMC one, but it seemed somewhat thin and meager in comparison.
There are no problems with installation or use.
The price is low, so this is sufficient for those who only need it for the time being.
The look and texture was not great.
I thought PMC's would be next.
View detail
As a carburetor for RepairHose
The carburetor hose was ruined, so I purchased this product to replace it.
The vehicle model is Husqvarna 2016 TE250.
Hose with an inner diameter of 4φ×outer diameter of 7φ and a length of 1m.
Clip×Quantity:2pc. I am glad that it comes with Set.
It is not long enough to replace all of the hoses used on off-road motorcycle carburetors.
In this case, you need to check in advance how many meters you need and look for longer products or buy several of them.
View detail
As Repair Parts
Since it is an OEM shape, Cook's Packing is deteriorating, so I'll give it a try! View detail
Fits: HONDA CB400SF, HONDA CB750FC, HONDA CB900F, HONDA CBR250, HONDA CBR250, HONDA CBR250, HONDA CBX1000, HONDA MVX250, HONDA VT250F, HONDA VT250F, HONDA VT250Z, HONDA VT250Z, HONDA STEED400, HONDA VF400F, HONDA NSR250R, HONDA NSR250R, HONDA NS400R
Savior!
VT250F (F2F) was leaking fuel from the cook, but the OEM parts were Assembly and not in stock …
I had no choice but to break the Crimp with a drill and turn the Packing inside out, but it still leaked, so I searched and found this part!
I bought it right away, installed it, and it matches perfectly!
I found it so good that I am thinking of buying another one as a spare.
Thanks!
View detail
Different sizes
I purchased a different size, but this is the only one I would choose for Fuel Hose.
Products less expensive than this have low weather resistance and may harden or tear, so if reliability is important, high-end products should be used.
This probably will not deteriorate and tear in about 10 years.
View detail
Small Type
Small type as a fuel fliter, and since it is a paper base, it is the one that you should be most careful about in terms of narrowing down the flow rate.
However, because it is a Small Type, there are many cases that are convenient for placement.
View detail
Used for my car kz1000
Replaced in preparation for carburetor Overflow.
The current Hose was concerned about fire in the event of a short leak.
The diameter was perfect and it was installed securely.
View detail
Fits: HONDA CUB-based Engine (CD), HONDA CUB-based Engine (CL), HONDA BENLY90 S, HONDA BENLY50CD90, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA GORILLA, HONDA APE 100 TypeD, HONDA GORILLA, HONDA APE 100
Flow rate that can be used for 4-cylinder Large-type vehicles.
I used it to increase the tank capacity of an air-cooled 4-cylinder 750CC Large type car and it did not suffer from insufficient flow. The quality is solid. View detail
cost effectiveness
Used for Restore vehicles.
I think it would be good to have a place called OEM Product sameetc.
Cost-effective.
NTB in Cospa.
That's what I'm talking about
View detail
Fits: HONDA BENLY50CD50, HONDA APE 50, HONDA MONKEY
Caution.
Purchased for HISATank for nsr50. At first it was good with no initial defects, but I took it off and stored it to repaint the tank. I asked a friend of mine who is familiar with motorcycles to take a look at it, and he said that the rubber packing inside was deflated by the gasoline when it was first used. I asked a friend who knows about motorcycles to look into it, and he said that the rubber packing inside had probably swelled up with gasoline when it was first used, and when it was removed and stored, it shrank more than when it was shipped. I ended up having to buy a new one. This was the first time I had ever had a cook that became unusable once the Gasoline was removed. View detail