Reviews
It doesn't mean anything.
It doesn't work particularly well for me as I don't do Race when I put it on, but I think it's a good dress-up.
Frame to Material:Carbon Style looks good in Parenthesis.
Also, I think it's good that the car body doesn't become extremely heavy even if it's Carbon.
I think it's a completely self-serving thing to put on.
View detail
Accurate chain adjustment
Chain Adjuster itself is easy to adjust accurately and quickly, although few manufacturers offer Aftermarket parts.
And the Anodized process is beautiful and I fall in love with it every time I look at it from the side
View detail
Large Logos are good for Parenthesis!
I love Rye TEC so I didn't hesitate to buy it.
I'm not sure if it's Italian standard, but the neck hole is a little narrower and the length is a little longer than a typical t-shirt.
The above is a concern, but I like the t-shirt itself very much and I wear it every time I tour.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
I can't pimp it out, but I'm happy with it.
The Fender Eliminator Kit by FOR JAPAN MODELManufacturer is too short and I'm worried about mud splashes, but since this product is quite long, I bought the Complete kit.
The texture is a little cheap for the price, but sufficient for the need.
There are two main problems.
The first one is that when using OEM Blinker, Screw hole of Blinker Bracket is obviously too small, so it was extended by Drill.
Secondly, the Parts that are installed on the car Both Sides do not match the width of the design. This is why I had to put Quantity:Pair (for Left and Right) It was installed by biting the Spacer for a total of 20mm of 10mm each.
Also, although not a problem, I felt that the Blinker and License Plate Light wiring process was difficult because they are quite a bit longer in length than the competitors' products.
Not sure how much mud bounce there will be as I haven't driven it on a rainy day yet.
I've said a lot of things, but so far I haven't seen the body with it installed in person or on the net, so it doesn't look like anyone else, and I'm happy with the shape of this product, which is a shorter version of the OEM Fender.
View detail
Fits: TRIUMPH DAYTONA 675 R, TRIUMPH DAYTONA675, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE
Just the way I wanted it!
First, it's not the cherry on the webike.
The BackStyle changes completely and the angle adjustment is also free, and I am ok with it. Maybe!
However, there is a need for a little ingenuity in the details, such as a bite of Rubber or hiding Wiring.
Mud splashing is not limited to this motorcycle; it's a natural part of the rear end of the car when touring. It explodes, rocks, etc., but …
There is no fading or deterioration after a year.
View detail
Things are good, but we should examine their purpose.
I bought these for the purpose of having a knee grip at the pass.
Installation is easy because you only have to pull out the Original Bolt and replace it.
The texture is beautiful and not cheap.
So, the important thing is to use it as a knee grip because it is more backward than I expected. The Hurdle is pretty high for
It's more like it's for Standing on a gravel road.
However, it's quite difficult to charge off-road with this motorcycle. So you should think carefully about whether to buy it or not.
The price is also quite high.
View detail
The installation method is unique
The GSX-R1000R does not have an inner fender on the Swing Arm I chose this product
Compared to similar products from other companies, this is a small swing, and the casting hole of Swing Arm (？) I think it's impossible to make it any bigger than this because it's a two-piece rivet fixture It is But the price is a Large swing (Bitter smile) 。
Maybe it's the way it's installed, but the Rivet sometimes comes loose In my case, one of the rivets fell off after about 2000km It needs to be checked occasionally
It was Ideas that made it possible to install SMART without using Tie Band etc Practicality..
View detail
Fits: YAMAHA TRACER 900, YAMAHA XSR 900, YAMAHA MT-09, YAMAHA MT-09 TRACER
It looks and performs well
The OEM Chain Adjuster was purchased because the scale is too sketchy for Large to adjust
The quality of Rye TEC's products that I used to use in my GSX-R1000 was good, so the MT09 was also made by this Product
Installation is easy if you have the ability to remove the rear tire
Remove the Axle Shaft and remove the OEM adjuster and install this product on the adjuster Just fix it in the bolt hole, it takes about 15 minutes! 。
The quality is as good as Lai TEC is easy to adjust because it is fine in 0.25mm increments
The problem is the delivery date, and since it is an import from Italy, it is affected by Corona, and the original delivery date was It took us three weeks to two postponements and ended up taking two months 。
View detail
Used in Z900RS
It is for Z900, but the part number of the Swing Arm is the same, so I was able to install it with no problem
Instead of pressing against the Bolt with the Chain's Tension like the OEMs, you can use the The position of the ASKUL is fixed by the amount of protrusion of the adjustment bolts, and the scale is easy to adjust it can be finely adjusted as it is engraved in increments of about 1.5mm
The ASKUL is easy to use because it doesn't tighten up the Gap or anything
I was worried about whether or not it would match the atmosphere of Z900RS, but it is not so obvious if it is black It is
I wish I had mentioned the tightening torque in the instruction manual because it is not mentioned, translation (enter here) There's no instruction manual for you to follow, but it's not that complicated, so you can use your phone's Camera to translate it If you do, there is no problem
View detail
Fits: その他 LighTech LED blinkers, その他 LighTech LED blinkers
Large size is 48mm
Rye TEC on Webike's Wide watt blinker relay
Wearing the Sequential Blinker FRE923NER
I installed this product because the first inner LED was chattering
Sequential operation was slightly stable, but the inner-most LED was
The light is subtly darkened
It's forgivable if you don't mind
This Register is Ceramic coated and 48mm long, so you can use it as a
The mounting location is difficult
Also, there is only a LEAD foot from this product
Wiring is difficult to do without soldering
Rated 10W 6.8Ω
It's the same manufacturer's product as Blinker, so you can rest assured
View detail
Fits: SUZUKI GSX-R1000 R, SUZUKI GSX-R1000
If it was just a little cheaper..
Stand Hook for LighTech's Chain Adjuster
Normally, to use the Endurance for Race stand plate, you need to use the Swing Arm (Rear end) To
This product, together with the Chain Adjuster, can be installed without any modification It is available
It would be nice if the price was a little lower
The shape would have been better if it was more slanted backwards and a bit longer on the front side of the Hook
View detail
I don't recommend it
The material is super Duralumin, so it's pretty strong there Also, I think Anodized is a strong one
However, there is no Construction Manual and there is no guidance on the Site, so where is it? It's hard to know if you're going to install it
Also, the Quick fastener was not included, even though it's for Fairing
View detail
I don't recommend it
I think Anodized is a good color and a strong one
However, since there is no Construction Manual and the Site doesn't show it I don't know where the Bolt is more than for Fairing!
View detail
It will loosen when you apply force
It will become loose when you apply force.
Also, you need to pull out the bar's Inner Weight, which increases vibration and fatigue.
However, it is necessary to pass through Lee TEC's Lever Protector.
(If you install NORMAL, Lever Protector will co-rotate. )
View detail
The first Slider
I installed it but protruded more than I thought
I can not help it because I do not receive Damage on the car body
I think whether the quality of things is not bad
I have not knocked it yet so I do not know the effect
I understand that Slider is effective in Circuit
Oh well on the public road Slider caused damage Damaged Large I will not listen to the talk so I can
I installed a color Aluminum cap at the same time but it is very painfully attached
View detail
Best gem
The adjustment of Chain will be easier like an idiot. More accurate.
More than anything Made in Italy. Beautiful as a work of art until the details. It is a gem you want to put on by all means.
I feel a little high, but I am convinced if this can be done.
View detail
Expected to reduce dirt on Rear suspension.
GSX - R1000L 7 - includes Rear (Inner) Fender, Mud Guard is not installed,
Because the surroundings of Rear suspension become soiled, I was looking for a countermeasure item.
We also examined other Manufacturer's, but the delivery date to be determined (3 months or more) or,
I chose this Lightech product because its shape does not suit my taste.
By the way it is dealt with by web! Ke but the delivery date is too long (1 and a half months) Because
I bought it from abroad. It arrived in less than 3 weeks.
About the product - - -
There is no installation Screw, instruction manual, installation explanation on it that came from overseas,
Only Fender has arrived.
(If you purchase with web! ke, the authorized distributor will be doing it for Japan.
I think that it is impossible to buy the same thing in Japan - - - )
I installed it for myself about the installation.
If you get confused about how to buy the same thing or buy it before you buy it
I will answer if you can listen using Message function.
I hate being imitated by an indefinite number (Lol)
As for accuracy, it has a good shape to fit perfectly with the reinforcement part of Swing Arm.
I also felt that this Manufacturer 's thing was "usable".
Even the mounting method even if the Manufacturer designation is ordinarily there will be more points.
I think that the shape is a little small, is not it?. Just absolutely better than nothing,
Large is too much I wish to work so I wonder if this is better - - -.
Strength is sufficient. I confirmed the making of each part before installing, but there is no anxiety at all.
Since the traveling after installation is still small, the reduction of dirt around Rear suspension
It is not realized but it will be better - - -
View detail
Very good item.
Installation is easy and installation completed in 3 minutes. There are only expensive items and it's a beautiful finish.
Last week we went to Touring 1000 km, but on expressway etc foot legs hooked on foot will increase Hold feeling and stabilize. It was really good to purchase.
View detail
LighTech's Small thing is good
Purchase at webike Yahoo! store for attaching to 17 years. I arrived in about a week! Lever Guardetc. I tried buying it because it was good, but Fitting is not good (-;) It's Oversized a little Large - - - I put Magical racing on another car, but when you compare "Because it is made overseas as well, it can not be helped" It is a level Level.. ... but it's cool and watching w View detail
I'm glad!
I ordered AntishockRubber in Red color.
White color is attached with Standard and Red color has been taken as separate Parts.
It was nice to have a box feeling of luxury AntishockRubber
CBR 1000 RR 2009 MODEL required Cowl processing Because we attached it to the PRO,
It is installed beautifully.
View detail