Reviews
Installed on CL50!
Installed on a CL50.
I was looking for a hose inner diameter of 4mm and found the Minimoto Fuel Filter, so I bought it.
The size was also small, so the installation went well.
It would have been better if the Hose Band was included.
I am satisfied with the low price.
View detail
Fuel Hose for old Scooter
When replacing the Fuel Hose on an old Scooter, I installed this Fuel Fliter to kill two birds with one stone, since bending the Fuel Hose to 90-degrees eliminates bending of the Hose. The fuel flow is also visible, so maintenance is easy. View detail
As a precautionary measure.
I used it on a MONKEY Fuel Tank that I had rusted off.
I had the tank rusted and the holes repaired, but I wasn't sure if the Garbage, Sludge, etc. were completely removed, so I put it on.
It certainly seemed to work, but as a result, the Filter itself became clogged with Gas and became unusable.
Thanks to you, there is no inflow of impurities into the carburetor and it works (laughs).
View detail
Larger than expected
If you have a car that doesn't have a space, you can install it, but it will be a bit messy and unparenthesis. Garbage removal performance is fine. The flow rate is also fine. View detail
I'm happy with the way it looks.
The price is very reasonable, but it looks very good, and when you put on the Filter, the custom feeling goes up considerably. [Color] Clear's Fuel hose and Skeleton's Fuel filter Matching are my personal favorites. View detail
Prevention of Fuel Hose Bending
I think the main purpose is to Catch rust and Garbage with Filter, but I bought 90-degreesType to solve the bending of Hose.
A little more compact would be even better.
View detail
I change mine regularly!
I replace them regularly when they get dirty.
This is an insurance policy to prevent the Carburetor from malfunctioning.
I also like the L-shape.
View detail
To prevent foreign objects from entering
[How is it used?
I used it on my TZr250R.
We do have rust removal on the Fuel Tank and of course the Cook has a Filter, but we use it as an insurance policy to prevent as much rust and Garbage from flowing away.
Was the one you received as per Image?
If you have a vehicle with limited space, it's a good idea to check the installation position beforehand.
How was your experience with it?
Hose inner diameter is φ8mm, so I cut off the tip part with Cutter and then installed it.
I've only run the engine a little bit since installation, but so far the flow rate seems fine.
I can't confirm the visible foreign body etc. at the moment, but it seems to catch it well.
[Points to note]
If you just look at the Body, you'll want to put it on backwards, but the orientation is as shown in the picture.
I don't think it's a problem because it's in the description, but you need to check the mounting direction.
How did it compare to other products?
This is my first time installing a Filter, so I don't know about other products, but it's good that it can be used for both φ6 and φ8m, so it can be used in any car model.
【Review】
You don't have to measure every Hose inner diameter, but you can be sure to buy this product.
It seems that only Gasoline flow rate may be a problem, so you need to be careful there.
View detail
Small is good.
I installed it on my CUB and it was very small so it didn't take up much space.
The Filter is now installed and I feel more secure.
View detail
A must have for old cars
This is a must have for old cars, I used it on my CRcarburetor. I used it on my CRcarburetor. It looks good and is transparent so you can see inside.
But once I put the Hose on and tried to take it off again, it broke ….
Well, it's a cheap Parts, so what can I do?
View detail
Large size, just right for a motorized motorcycle
I bought it with the remainder at Point. It gave me peace of mind as it is an old moped Motorcycle. View detail
Select the carburetor to be used depending on the flow rate.
When I use this filter on a Motard 115 with PE24, I don't get any air bites in the filter if I don't open it all the way, but if I pull it all the way, the gasoline supply can't keep up with the filter and it's completely useless.
It is not suitable for the car that uses the fuel cock of the fuel hose of φ6, so it is necessary to pay attention.
View detail
Simple, small, and unobtrusive
This is a 2-stroke mixed gasoline car, so I thought it would be a good idea to install an oil filter. It's a little hard to tell from the picture, but unlike the one that filters the entire drum shape, this one has a stepped CenterShutter divider that collects impurities at the bottom and allows only the gasoline to flow through the mesh at the top. Therefore, the filter must be installed vertically, so if you can only install it horizontally, this may not be the right filter for you. I like it because it's thin and simple, but the finish is not so great. View detail
Replace every 2 years
In use on KawasakiZ1. I change it every time I inspect the car.
Gasoline flow rate is also no problem, the ideal fuel line can be made with L shape.
View detail
It's a necessity for older cars.
We use it for insurance purposes.
I replace it every time I inspect my car because it is inexpensive.
View detail
This is a normal product with no problems. Need to be replaced periodically
The discharge rate is not low and I have no problems using it.
When I did the rust removal of the Tank, I was worried and the net of Strainer of Fuel Cock had been removed. I thought this was Redn and installed it.
It's troublesome when Jet is clogged with a short Rust.
I think it needs to be replaced periodically, so it's like seeing how dirty it is.
View detail
It can be disassembled and cleaned so it can be used repeatedly.
Until now, Material:I used Plastic's Disposable Type.
The size of the Filter is Compact, so I was able to install it with CRcarburetor and K&N Filter without any trouble. I disassembled the filter to check the water penetration after driving in the rain, but it was a good feeling because the structure is simple.
View detail
Filter for peace of mind without feeling the flow
To be mounted to hug an external round Frame.
Is it too extravagant to ask for ingenuity in the shape?
View detail
for Replacement
I used to install disposable Type, but I bought this one because it looks good, I can reuse it, and it's easy to check the condition inside. It is easy to check the inside condition. I hope it will last for a while. View detail
Installed on gsf1200
Note the heat near the Engine.
Curled …
I didn't even get a Paper-type stinker.
It was good, though.
View detail