Reviews
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
spare
For 110 Type Coupler, it is a repurchase for another Cable to confirm the operation after connecting to the Coupler.
Single Item sales were helpful because I could purchase only the number of items I needed.
View detail
Fits: Others OBK58/42 : V56 : TRK52 : V46 : TRK46/33 : B33NMK : V47 : V40 : B47 : E470 : E450 : B37 : E370 : E350 : E340 : B33NML : E300N2 : E260 : E230 : OBK48/37 : V35 : B27N : B360 : E250
Quantity neatly:Set possible
I was in-locked at a SA on the highway, destroyed the Key at a Service station, and purchased it.
Replacement work is not that difficult.
View detail
Connector Replacement
The MotorConnector installed is old and discolored, so we are purchasing a new one for replacement.
The TAB, receptaclePin, and Connector set was reasonably priced, but I was able to exchange it for a new one.
View detail
Safe and DAYTONA products
I purchased this product because the handling of the Brake switch has changed due to a change in the Braking system.
We chose DAYTONA because we thought it was not the part to go out of our way to buy OEM.
It is a safe part that is neither too good nor too bad, but it would be surprisingly useful if there were a lineup of parts.
View detail
Terminals Waterproof and for insulation
Used for the crimping part of the Brake terminal.
Mainly for waterproofing purposes. To be honest, I thought two Shrinks would be enough, but I was attracted to the fact that there are various types of Covers and that they come with a Case. I will keep it for a while because I can use it in case of emergency.
View detail
Very inexpensive.
I would like to install a new Grip heater, but I would like to calculate if the heater is Large enough to interrupt the wiring between the USB port and the Relay. The maximum charge current of the two electrical components is 3.3A at 13.5V for the Grip heater and 4.8A at 5V for the USB2 Port (5V is switched on and off), totaling 8.1A. I bought Emon's AV1.25sq. The available power is 140W or less for 12V cars and 280W or less for 24V cars. If converted to allowable current, it is about 11.6A? Although it is within the allowable range, it is not as high as DAYTONA's AVS1.25 (A) of the same size.:Auto for Vehicle Low Voltage Power Line, V:Vinyl、S:The price is 1/8th of DAYTONA in unit length, and Emon is very cheap. By the way, it is another Wiring, but the most large current of ETC on-board unit seems to be less than 1A because it is 1AFuse, although only standby current was written. View detail
I hear it breaks down a lot. 。 Looks like it's been taken care of.
Wiring has been removed from the mounting of the switch.
I tried to do it because others were consolidating ahead of me, but it was a little different, as if they had taken measures.
I hope it doesn't get torn off.
View detail
Wiring as usual
[How is it used?
I had been using it for wiring work and bought it at Home centeretc. when I noticed it, but I ran out and had plans to shop at Webike, so I bought it along with the other products.
Fine wire 0.5sq is used for those with low power consumption, while Others basically use this 0.75sq.
[Was the product you received as Image?
It was just like the picture.
I always use the safe Black Wiring.
How was your experience with it?
This is a standard Wiring Cord, so the product is solid.
Emon's Wiring Cord allows you to hook up excess wire with the Holder, so you don't have to worry about it being RoseRose the next time you use it.
【Review】
It is inexpensive, readily available, and of consistent quality.
It is also convenient to keep Wiring together.
I always use Emon's Wiring because it has no problems with heat resistance, oil resistance, etc. for use on motorcycles.
View detail
Racer vehicle to public road Spec. return
[How is it used?
I purchased the Racer vehicle to restore the Headlight Wiring as it had been cut off.
Quantity as there are two lights in the H4Type Headlight.:2pc. I bought a set
Was the one you received as per Image?
Photo
Was the installation difficult?
Installation can be done quickly if you have a certain degree of Wiring processing skills.
I couldn't work with regular Electric Works Pliers when I was cranking, so I used Radio pliers.
However, The top is for Earth, right? Check the wiring diagram carefully beforehand.
The connector is also securely fastened so that it will not accidentally come loose.
How was your experience with it?
Of course, as long as the Wiring is solid, there is no problem at all in lighting the Headlight.
It also engages well with the Valve of Headlight and does not seem to come loose.
[Included Parts:were they on?
It comes with a Connector and the required number of terminals.
[Was there anything that disappointed you?
Not particularly
【Review】
It is good for those who make their own wiring around the headlight and for repairing old OEMs.
The terminals do not come with spare parts, so install them carefully to avoid mistakes.
View detail
Sober and awesome.
The cord is thin and requires some delicate work, but it is a good product that is compact, unobtrusive, and does the job SMART because it is a dedicated product. View detail
Used in Horn's Flat Terminal
The Wiring for the car Both Sides was short and was used to extend it. View detail
Easy to use
I bought it because I couldn't find it at my favorite store and there was just a Point.
It is easy to use, but the rubber rubber doesn't last long because it is used in a place where it is bent many times.
We purchased several in stock as consumables.
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
CellMotor Exchange and Quantity:Set
CellMotor Exchange and Quantity:Replaced by Set. The cord is a little long, but no problem. View detail
Before running short on the way to the car parts store!
I had it in a 20-pack, but I started working on it, ran out halfway through, and had to run to the car parts store.
They are not expensive, so I should have bought a 100-pack from the beginning, considering that I would have lost efficiency if I ran out halfway through the process.
View detail
Unwavering Reliability & Quality 2
Unwavering Reliability & Quality 2
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Unwavering Reliability1
Unwavering Reliability & Quality
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
waterproof coupler
I used Daytona license lamp coupler 2 pole to connecting DiodeDynamic Led pods SS3 on Ducati StreetFighter 1098, the coupler and terminal included can be easily to install. With waterproof coupler I can install outside to easily remove the led SS3 to use for another bike. View detail
Cool, FOX2! (SwitchON)
It is not waterproof, and of course, it is a product that requires self-processing. It takes a lot of time and ingenuity.
But! Anyway, Missile switch is a piece of man's romance! Good looking, and the texture of the toggle is also good!
Tick-tock ministry." and the finger-soft texture is irresistible!
It's affordable and it's a Recommendation anyway!
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA GB350, HONDA DIO110, HONDA GB350S, HONDA LEAD125, HONDA FORZA250, HONDA CT125CT110 HUNTER CUB
I'd like to see a lid on the STAND side.
To install, simply remove the connector from the STAND side and plug it in, then use the Tie Wrap to secure it in place. It would be great if a cap was attached, but it is very nice to be able to run warm-up operation even with the Side Stand out. View detail
Wiring Protection
Purchased to protect AntennasCable for ETC, though it was a challenge to get it through the Wiring Tube,
Once we got it through, it was ours, and Wiring was a breeze.
It also protects the Cable, so it kills two birds with one stone.
View detail