Reviews
high quality
[Color] I bought it because I wanted it to be a Screen for Smoke.
The quality is good, moderately thick and solid.
Since there is no distortion, there is no distortion of the view when looking through the Screen.
Installation is also bolt-on, so simply remove the OEM and install in the reverse order.
[Color] The Smoke color is not pure black, so you can see the other side.
I think it is just the right density.
View detail
Parenthesis OK
Installed on MT-07. It reduces wind pressure at high speeds a little, but I think it is just a parts for appearance. I am satisfied with the quality. View detail
MRA would be Included Parts:.
[How is it used?
I bought a High Protection Screen from Secdem and lo and behold! It doesn't come with the edge molding! MRA comes standard with Screen's edge molding, but Secdem's High Protection Screen, which costs 10,000 yen more than MRATouring screen, does not come with edge molding! So I had to buy MRA's Universal Edging Mould separately (tears).
Was the one you received as per Image?
Clear or. [Color] I was not sure whether to use Smoke or Smoke, but I wanted the border line to be clear enough to be able to see the hadrill. [Color] I chose Smoke and it was the right choice.
Was the installation difficult?
At first glance, it looks easy, but it was tedious to handle the ends of the braid carefully or it would not look good. The work took about an hour.
How was your experience with it?
It doesn't seem to have much to do with aerodynamics, but it does look different without the molding! Besides, if the Screen doesn't have a molding, it may be dropped at the car inspection (because the corners of the Screen are sharp and dangerous), so this is a perfect solution for the car inspection!
[Included Parts:were they on?
Two Clips are included to secure both ends of the braid.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:The length of the braid is 1m, so it needs to be cut to fit the Screen, but if it is cut too short, it will be irreversible. Gradually, we trimmed it down and adjusted it.
View detail
Windproof performance is high, but the shape of the Bracket needs to be improved.
REBEL250 SEdition's Cowl was removed and installed.
The windproof performance is high for a Compact, and can reduce the burden on the body at high speeds.
This is a Type that is installed using Bolt in the Meter section.
Due to the shape of the mounting bracket, it is not compatible with KIJIMA's Handlebar.
If you want to install it together with the Meter bar, you should prepare a collar (Spacer) and set it a little forward.
I used the one that came with Endurance's Meter visor set.
So far I have installed Endurance's Meter visor set, so I have uploaded some photos to compare with it.
The biggest difference is the angle of the Visor.
The Screen itself is not that different in Large size, but when you actually put it on, the impression you get is that MRA's product stands up better.
Parenthesis is good when lying down like Endurance, but standing up is better when only windproofing is considered.
Also, Endurance's bracket is simpler and requires no adjustment, making it easier to install.
On the other hand, MRA's Bracket is Simple and may be good for those who have various things around the Handlebar without getting in the way.
View detail
MRAScreenBlack
It is taller than the OEMScreen and provides better wind protection.
It's also nice because it doesn't go too high and tightens up the Design.
The black color naturally reduces visibility, but it is not a problem since we are not always riding face down and we are not racing.
Considering the Design and wind protection effect.
Recommended
View detail
FZ400R (46X)
Size and shape were perfectly fine.
The mounting screw holes are precisely positioned and the OEMScreen is removed and left in place.
Installation was easy.
The lower Screw hole is in the Upper Cowl, so it may be a bit of a hassle to remove the Cowl.
The process is simple.
View detail
Stable quality MRA.
MRAs are known for their quality.
Purchased twice for my previous vehicle versys650.
(Repurchased after a fall at Circuit)
The running wind can be cut sufficiently.
However, if your vehicle is equipped with a bar end mirror, I think Y’sGEAR's Short Screen is more STREETFIGHTER-like Match.
Installation is easy and anyone can do it.
By the way, the ETC Antennas can be installed under the Screen, so the Handlebar area is refreshing.
View detail
Mall Clips
If you do not pinch the braid clip very tightly, the clip will come off when you remove the motorcycle cover or while riding.
I only need Clip this time, so I bought it. 。
There was no need for a mall.
It would be great if you could only sell Clip.
View detail
Exactly
The included parts were easy to understand and the installation was completed easily.
The instruction manual is in German, but you can find it in the illustration.
View detail
The look is tighter now.
I installed it on my YZF-R25 '19.
The replacement process was a bit more tedious for the R25 than for other full cowls because the front inner cowl had to be removed.
The OEM Screen is short and matches the design of the car body, but the wind protection seems to be a bit low, so I replaced it with the MRA one.
The MRA Screen has a simple shape, but it is high enough to provide good wind protection, and I could immediately feel the difference on the highway.
Color is [Color] I chose Smoke, and while it doesn't mean you can't see what's on the other side of the screen, it's not quite as visible as Clear Screen, so if visibility is important to you, go for Smoke. [Color] I think it would be better to choose Clear.
I'm glad I bought it because it's very thick and doesn't seem to break easily.
View detail
To make it a Japanese Vehicle Inspection Correspondence!
I installed the windshield of the Other Brand Product to make it a Japanese Vehicle Inspection Correspondence!
It passed the inspection without any problems.
View detail
It may look like that, but it's useful.
I like the helmet because it allows me to adjust the amount of wind against my chest.
I use a different height screen for summer and winter, and I can also adjust the wind between my body and the helmet by adding this. When it's hot, you can set the Screen to Flat and the wind that is blocked by the Screen will hit your body instead of going up. When it's cold, if you set the Screen upright, the wind will escape upward, so it won't hit your body as much.
However, it will look messy.
But I can't resist the convenience of having it on.
View detail
Installed on CB1000R (SC80) 2021
[How is it used?
I've been riding a Motorcycle with Cowl for a long time, so CB1000R (SC80) I'm going to switch to
I was feeling the Stress in the wind, especially at high speeds.
The Screen of CB1000R had the Screen etc. of Mr. DAYTONA until 2020.
The 2021 model is not yet available and there are no plans to develop it.
So I installed this MRAScreen from Universal.
It will come in handy as I often use the highway in Touring.
I think it looks good on CB1000R without destroying the style for large Screen.
Was the one you received as per Image?
The Bracket did not fit into the Clamp on one Bracket, so it had to be widened before installation.
Was the installation difficult?
Installation is Quantity:Pair (for Left and Right) I had a hard time taking the Balance of
The Handlebar Holder on the Top Bridge and the Clamp on the co-clamped Bracket rotate together as they are tightened.
Quantity:Pair (for Left and Right) You have to tighten it while holding down the Bracket of the
Also, the moldings that attach to the Edge are very hard to fit.
You may want to work on this before you install the Screen into the car body.
How was your experience with it?
The wind protection performance is quite good. The wind exposure to the chest area has been reduced.
No shaking or vibration even at high speeds.
ETCAntennas also works fine.
Bracket is a bit of an eyesore, but you'll get used to it.
I think Styling is good.
[Included Parts:were they on?
Everything was included.
[Was there anything that disappointed you?
The color of the Mount parts of the Screen is matte black, so I feel a little uncomfortable.
Point and hang of installation/Attention/Opinion and request to Manufacturer
Instruction Manual is in English.
When installing, temporarily assemble (do not tighten) the Screen and Bracket, and then tighten the Handlebar Holder and Clamp together.
The vertical direction can be adjusted until the Screen mount is tightened.
Quantity:Pair (for Left and Right) Tighten the Clamp on the Handlebar Holder and Bracket so that they are symmetrical.
Be careful not to retighten too tightly or the Handlebar may turn.
The braid is difficult to install Large strange, but you can spread the tip and pinch the end of Screen.
You should be able to lift it up about 90-degrees and pinch it as you go.
It would be nice if the moldings were stiffer for easier installation.
View detail
Fits: DUCATI 899Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale
The Screen looks distorted.
When you open the Package
The screen is distorted like a mirage, what the heck!
It looked distorted and made me feel sick.
I've been trying to call you, but I can't get through...
I can't return it, and I don't want the same person to come back next time, do I?
View detail
I can't get a screw.
I tried to install it, but the screw hole of one of Screen's folder is too narrow and Screw can't fit. View detail
Processing required for 2021 MODEL
[How is it used?
Was the one you received as per Image? As per Image
How was your experience with it? It has some effect.
[Points to note] Unlike the description, 2021 MODEL can not be installed because the position of Screw is different. It is necessary to process and devise.
How did it compare to other products? I have purchased this product several times and it is as good as any other.
Other items that would be helpful
Opinions and requests to Manufacturer:The explanation is too vague and I think there are people who misunderstand. It cannot be attached to the current MODEL.
View detail
I changed it because of the increase in Small scratches over 10 years of driving.
The screw fixture does not fit the mold and floats a little.
I think it looks good if you like it.
The wind flow is the same as NORMAL if it is folded up.
I honestly couldn't tell the difference when I moved it.
If you are worried about wind in Touring
I think it's better to buy a larger size.
View detail
Wow that's cool
Installed on a GSX-R1000R 2019
Every vehicle in my history has chosen MRA for Screen replacement.
I chose the Clear type and it is as transparent and accurate as I expected.
Not only does it increase the Screen height and improve wind protection, but it is rather more Race ish than OEM in terms of Forme.
It also comes with a braid to cover the edge of the edge.
The only drawbacks I can think of are that this braid will yellow over time and the clip that holds the braid in place will rust.
However, since the body does not deteriorate particularly, I can procure only the molding and replace it appropriately.
When installing, it is important to note that the Screen on the R1000R is held in place by a T10Torx bolt.
It's the first Size I don't have unless I buy them individually.
Also, the Screen has 6 bolts, but the length is not one type, so you need to be careful here too.
Also, the quantity on the front side of the car body:I think you will have difficulty installing the 2pc.
It seems like a sure thing to remove Upper Cowl, but Quantity:Pair (for Left and Right) If the Mirror is removed, the Cowl will be able to move somewhat, and if it floats in this state, it is possible to slide the Well nut in without removing the Upper Cowl.
So, the thing is a product that can do a solid Recommendation.
It is safe to leave it to the shop if you are not confident because it may be difficult to install it structurally.
View detail
Design is very good
Buy it because of the design
As far as wind protection goes, it's a lot more promising than OEM.
Minus only a few effective points
I personally like the Sticker that comes with it.
View detail
Easy to use
You can buy quality Windscreen Mole at affordable prices.
Quantity:I'm giving it 4 stars because I feel that the Sticker in the Set might have looked better in the previous version.
View detail