Reviews
Easy to charge!
[How is it used?
I have several Motorcycles, so I purchased an additional one for maintenance.
Was the one you received as per Image?
Wiring only, but the product is exactly as shown in the Image.
Was the installation difficult?
Simply connect to Battery.
How was your experience with it?
The CB1100 battery requires the Tool Box to be removed, so if this wiring is connected at the beginning, it is easy to charge the maintenance battery during the winter when it is not ridden very often.
[Included Parts:were they on?
Wiring only.
[Was there anything that disappointed you?
None
▼This is a recommendation for vehicles like the CB1100, where the battery terminal cannot be immediately released.
View detail
sufficient for one's needs
I bought this for Stem Nut and Wheel nut of my car.
The Torque wrench is a fairly inexpensive part of the Torque wrench, but it is not excessive or inadequate.
View detail
good enough to be useful
[How is it used?
I bought this to bleed air out of the Tube when replacing Tire.
We chose this product because it was portable and had a Size that could be used for any Tire.
Was the one you received as per Image?
As you can see in the picture, it is quite small.
It can be placed in an in-vehicle tool box, etc.
How was your experience with it?
I used it on an older Tube that originally came with it and had no problems.
If you are not particular, this product is sufficient.
[Points to note]
There is no storage bag etc., so it is necessary to prepare it separately.
How did it compare to other products?
This was my first time using the Tire Valve Driver and I thought it might be too short, but it was no problem at all.
【Review】
It is inexpensive and very small, but it did not interfere with actual use.
It is a good idea to have a PC because of its size that can be easily mounted in a car.
View detail
It's easy for anyone to use.
The Clip portion is +Red and -Black. and visually very easy to figure out!!!!
I have been using it for over 8 years with no problems. It is well made and
Compact and affordable! Impeccable!
View detail
Sturdy and easy for anyone to use
I have been using it for about 8 years now without any problems.
Just connect it to the battery terminal! The color of the Clip part is also very easy to understand!
I'd recommend it to everyone, because it's never a bad thing to have!
View detail
Cheap!
ValveCore driver, an inexpensive but indispensable Tire replacement
It is hard to think of a use for Mini type.
Body is Color:Gray, chic and likable.
It is not too conspicuous and functional for small tools, which are often orange-colored or large in size.
View detail
In dark and hard to see places!
When looking inside the Engine room under the Seat of the SuCUB, there are places that are difficult to see even in daylight, so this MobileLight is the solution. This MobileLight is easy to use:it can be placed, hung, or attached with a magnet. It can be used for 18 hours with 3 AA batteries, so I think it will last for a long time. It is inexpensive, but it is brighter than a flashlight and very useful. View detail
For Sidecar
I use it for parking on hills and I am a little worried about parking brake alone so I use a stopper on the rear wheel just in case. it fits inside the glove box so when I stop the Sidecar, I just take it out and put it on the rear wheel.
If you have a Motorcycle with GEAR, you can put GEAR in it, but I would recommend it to Scooter owners.
View detail
Compact is fine.
I have one from another Manufacturer and bought it as a spare.
I think Compact is a good idea.
View detail
Reasonable
This is used for areas where the Torque is Large. Measurement is also possible.
Very easy to use.
View detail
What's the use?
The DT50 has a Spark plug hex on the Cylinder head, so it was easy to remove with a MONKEY Wrench.
But with the 4st Engine, it is in the bottom of a deep hole, so the choice is to use Deep socket or a product like this.
It is a standard product that has been around for a long time, but it is still a longtime seller and is easy to use.
View detail
Easy
I bought a Torque wrench because I didn't have one before.
Recently, I had more and more chances to tighten the Rear Axle Nut for chain tension adjustment, etc. I did not know how tight I should tighten it, so I just did it by my own roughness.
However, this is safe because it can be tightened at a predetermined Torque.
However, the body is a little large and heavy, so it is not suitable for tightening small parts.
View detail
Conversely, Screw is easy to loosen because it is long.
I am not sure if the Torque is accurate or not. I am a little worried about that because it is made in Taiwan...but there is one great advantage.
It is bigger, heavier, and longer than other Torque wrenchs, but fortunately it can easily loosen even the tightest Screw.
If there is a bolt that is too tight, this will loosen it easily, won't it?
View detail
Fairly easy to use
I purchased this product to use when changing Tire.
It was just the right length, and I personally liked it just fine.
View detail
Large Scale
I purchased this for Torque management of Axle Shaft installation.
The wide range of the Torque measurement range could be used for Caliper Mounting Bolt.
The most Large is 210 Nm, so it is indeed Large-sized.
View detail
cheap
I use it in Garage at home.
It is a simple product that prevents the car from starting in case of emergency, but it serves the role of a stopper.
View detail
Quantity:Set and easy to use
This Driver is useful for removing and installing Air Valve insects.
Normal Length and Short Type is Quantity:I like that it is a Set so I can use it in different ways.
Short Type is useful because it can be turned in tight spaces.
View detail
Convenient
Just plug it into Cigar lighter and you can use USB and Outlet for home use.
This is useful because it allows you to both charge your Smartphone and use your PC in the car.
View detail
Convenient
I use it to lift Motorcycle for light work.
It is just the right Specs for Motorcycle, so it is just right to use for lifting Rear tire, etc.
Because it is Compact, it is easy to store and unlike hydraulics, it will not fall out.
View detail
Safe to have
I purchased the PCX150KF30 Ignition because I had a problem with it and realized the need for a Battery check.
I think it is a safe tool to have because it can check not only the voltage but also the alternator.
It is inexpensive and cosmetically pleasing.
View detail