Reviews
Fits: KAWASAKI 250SS Mach I (S1), KAWASAKI 350SS Mach II (S2), KAWASAKI 400SS Mach II (S3), KAWASAKI KH250
Used for 350SS
I used it on a 350SS. No problem. I think it is good. View detail
OEM400fourType Sticker!
[How is it used?
We also matched the Emblem along with the Tank paint job of the coveted Yong FourSpec.
Was the one you received as per Image?
I felt that the size was larger than the Image, but I think that's just how it is.
Was the installation difficult?
Alignment is very difficult due to the diversion of another car model.
I am especially nervous because I have failed once in the past and I assume it will be used for a long time, but it is difficult for an amateur to do so, so after the application from painting to pasting [Color] I asked PRO among PROs whom I can trust for Clear finishing.
How was your experience with it?
[Color] It is said to be a Material that can withstand Clear coating.
The durability is yet to be seen, but I don't think I will ever get tired of it because it is the Design of my dreams.
[Included Parts:were they on?
Sticker only.
[Was there anything that disappointed you?
Sticker at the time may have been like this, but the colors seem a bit cheap.
Please refer to the images etc. as Tanks of ▼Yon FourDesign are still rare.
View detail
Mounted on GSX250E
The OEM ball bearing had been crushed or protruded during its lifetime, so I can expect this shape to be more durable. View detail
CarburetorOverflowTube
Used on a 1981 HondaYAMAHA Super JOGZr Wing BlackGL500 I used it on a Custom and it fits perfectly in the tube connection under the Float Chamber of the Carburetor and the Clip that comes with it is tightened properly. View detail
Besides Repair, it is an indispensable Item for Yong Four style custom!
[How is it used?
I bought it to make a Yong Four style Custom.
Was the one you received as per Image?
It was a little cheaply made, but generally as per Image.
Was the installation difficult?
It is easy to apply if you position it and make sure it is tight enough so that no air can get in.
How was your experience with it?
It now looks like a Yong Four. (Lol)
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
I haven't run in the rain, but it doesn't seem very water resistant.
It has been over 5 years, though, and so far we are still enduring.
If the engine displacement volume is small, it may look like a misinterpretation or an overstatement.
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI GPz400F/F2, KAWASAKI Z400GP, KAWASAKI GPz400F/F2
Cheaper than OEM
The deterioration of the fastening nut on the Sprocket has been bothering me for quite some time, and I tried polishing the nut, but it just wasn't refreshing. I thought about getting an OEM one, but then I found this product and decided to buy it.
To be honest, I thought I could get by without removing the wheel if all I wanted to do was replace the nut, because removing the wheel is a pain in the ass. So I decided to remove the wheel.
Replacing the nut was not particularly difficult, as it was just a matter of removing the old one and installing the new one, and stripping the Sprocket of its paint was relatively easy using Holtz stripper. I also used a wire brush and METALCompound to lightly polish and clean the bolt.
As for the Nut, the plating is solid and the loosening stopper works well, so I think it will not disappoint.
It's not a very noticeable part, and functionally there was no problem with the old Nut, but I'm very happy with how it looks now.
View detail
BRCFront Fork Seal
FrontCB400T was leaking Oil.
For the first time I bought a BRC CB400TSeal and looked at it!
It's been about two months and so far no sign of leaking.
It's a RECOMMENDATION because it's less expensive!
View detail
BRCFront Fork Dust Seal
This was my first purchase from BRC!
So far, no oil leaks.
I will buy it again because of the low price.
View detail
Plating shine is good
This horn has a very nice shiny plating and looks great with American style. This horn has good quality and beautiful plating, so it looks more custom than NORMAL horn. View detail
z2 mirror review
I bought this while looking for a z2 style mirror to use on the handle of the W800 hurricane z2. It is shorter than the original, so it suits better when the handle is raised and has better visibility. However, the product that was delivered has some scratches. That part is a bit disappointing. -- I bought it while looking for a z2 style mirror to use for the W800 Hurricane z2 handle. The order is shorter, so it looks more suitable and more visible when the handle is raised. That part is a little disappointing Powered by Google Translator View detail
It's expensive, but... this is the way to go for foil washing.
It's expensive, but it's easy to wash the wheel with water.
For oil stains, first "A certain man, a certain man, 556. etc., and then lightly pour off the oil with detergent.
View detail
Mirror
I'm satisfied with the plating experience as I imagined There are two types of legs, one long and one short, and I'm using the long one right now, but I'm going to use it for a while and then change it I think I'll take a look View detail
Easy to dress-up! Number two
With the change to Front FenderDown, you can easily dress the front end of the car-you can up
However, the 250TR is not a compatible model, so you'll have to get creative and make your own Stay
I used a combination of the following parts to hold the Emblem in place
[Additional parts]
Aluminum Bracket 20 Al-3 150mm
→Cut to 125mm because it interferes with the Emblem as it is
・KITACO Hexagon PillarM6×35 ×Quantity:2pc. Set
・Posh Faith Universal Collar Set (M6-t5) (Quantity:2pc. Set in)
・KITACO Aluminum spacerM6 (Outer diameter 11mm, thickness 3mm)
→Height matched with the same thickness as Horn's Stay
・M5Nut&Spring washer&Washer (Stock on hand)
I'm happy with the old car feel and the front end area has become more lively
View detail
Mirror
It's good that there are two types of legs of the body is Large strange
I installed the long one for now, but I'll replace it with the short one when I get tired of it
Visibility is just as clear as NORMAL
I'm glad you chose Plating
View detail
Compact, no trouble with places
I was troubled by things with 7 mm inside diameter, but I found this item, purchased. The product is very small and it does not bother the place and the Hose Band is solid. View detail
Pretty nut
It is a set of shine nut. Good quality. It make my bike become very stylish. Very nice coating. I am happy with that. Thank you. View detail
only this one.
I used it for hydraulic clutch of ZEPHYR 1100. I got to this by saying Aluminum in the place of Aluminum. It's cheap and relieved. Let's change it to a new one. View detail
Fits: HONDA CB400 Fore (air-cooled), KAWASAKI Z400FX/Z400J, SUZUKI GS400E, HONDA CB400 Fore (air-cooled), KAWASAKI Z400FX/Z400J, SUZUKI GS400E
I think that it is a good product
Items of this price with this price range are plating thin or cheesy things so many things I have only seen things hesitant to install on my Motorcycle, but I got lost but purchased because it was inexpensive. Results Large purchase and Large It was good. View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP
Even with strengthening ...
Gasoline leakage at the time of full Gasoline Tan that can be said as a destiny of Z 400 FX ...
I bought it as a countermeasure attracted by the word of strengthening.
The result is that it does not change that it leaks when it is fully filled Tan (Lol)
For the time being, I was reconfirmed that it is the best countermeasure not to enter Tan so far.
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z550, KAWASAKI Z550, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J
As expected
I bought it as soon as I got rust in Tank. Size was also Exactly and I was able to wear without Gasoline leakage etc. It is an unlikely product so it is a great change to yourself. View detail