Reviews
circling a large number of insects
This is fine as it works without any problems! View detail
Purchased due to the appeal of the cosmetics.
First-class products are always better, but I thought that a measuring instrument of this price would be sufficient. It is more reliable than no management. There are many comparison videos on Youtube, and I found them to be very helpful. If you want to be absolutely particular about tools and equipment, I recommend you to buy a first-class product from the beginning because you will lose money by buying a cheap one. View detail
It is heavy and secure.
[How is it used?
For complementing a heavyweight beloved machine that is reputed to STAND loose easily.
How was your experience with it?
It weighs approximately 2 kg and is extremely stable.
How did it compare to other products?
I chose it for its weight.
[Points to note]
It is heavy, but it moves rather easily when kicked from the side, so care should be taken in handling it.
I think it is designed for 4 wheels, but I think Motorcycle is also Large sturdy.
It would be great if you could develop one for Motorcycle.
View detail
Required when replacing Tire
It is essential when replacing Tire.
Since it is a Small Tire, it can be used with a Small Tire.
View detail
It's okay if you don't have it, but if you do, it might be useful for something.
I'm a Cross wrench for Automotive for Tire.
There will come a time when it will be of some use. (Lol)
In the meantime, it is more convenient to use a cross wrench for stubbornly hard nuts, etc., because it is easier to apply force to them.
View detail
Cheap and solid
Used in Step WGN Maintenance of Transporter.
I thought it was slightly difficult to put in and out the Bracket, which determines the height, but if you apply Rub or Grease, there is no problem.
It is cheap and has a sufficient load capacity, so I think Sunday mechanic is good enough.
I should have bought the Rubber adapter (sold separately).
View detail
Introduction to Torque wrench
I can use it for daily maintenance without any problem. The price is reasonable. The long handle makes it easy to apply force and easy to use. View detail
It is originally for Vehicle, but can also be used for Motorcycle.
I originally bought it for four-wheel maintenance, but I also use it for Motorcycle Lift up.
Although it is compact, it is designed to withstand 1 ton per pc, so it is stable and Brown.
When I raise the front or rear of my personal Level Motorcycle to remove the Three-Pronged Fork or Swing Arm Link, I use a Side Stand + Pantograph jack instead of a Racing Stand or Front-up Stand (a common technique in the Off-vehicle world, although some people may not be aware of it). (Some people may not know this, but it is a common technique in the off-car world.) However, when lifting a heavy motorcycle on rough terrain, the Pantograph jack alone is unstable and may come off.
In particular, frames without underframes are difficult to capture the center of gravity, and if the crankcase alone is used to support the frame, there is a possibility that the case will crack.
The Pantograph jack is then gently raised by placing it against a crankcase (while curing), and supported by an engine mount using our Jack stand while placing a block or the like underneath. Just like a four-wheeled vehicle. "Uma." The use of the product as a
As mentioned at the beginning, this product is quite Compact and does not take up FootSpace.
It is not the typical folding type, so it will not fold, fall over, or break even if it is set up a little roughly.
It also has a good amount of raising width, and is a very easy-to-use product, even when viewed purely as a Jack stand.
When stored, it can be made into a small size by alternating the two sides.
It is good to have it because it is useful for something in Motorcycle maintenance.
View detail
It was easy even for the first time.
I bought this product to try plug replacement.
This was my first plug replacement job and I found this Wrench very easy to use.
View detail
Easy to charge!
[How is it used?
I have several Motorcycles, so I purchased an additional one for maintenance.
Was the one you received as per Image?
Wiring only, but the product is exactly as shown in the Image.
Was the installation difficult?
Simply connect to Battery.
How was your experience with it?
The CB1100 battery requires the Tool Box to be removed, so if this wiring is connected at the beginning, it is easy to charge the maintenance battery during the winter when it is not ridden very often.
[Included Parts:were they on?
Wiring only.
[Was there anything that disappointed you?
None
▼This is a recommendation for vehicles like the CB1100, where the battery terminal cannot be immediately released.
View detail
sufficient for one's needs
I bought this for Stem Nut and Wheel nut of my car.
The Torque wrench is a fairly inexpensive part of the Torque wrench, but it is not excessive or inadequate.
View detail
It's easy for anyone to use.
The Clip portion is +Red and -Black. and visually very easy to figure out!!!!
I have been using it for over 8 years with no problems. It is well made and
Compact and affordable! Impeccable!
View detail
Sturdy and easy for anyone to use
I have been using it for about 8 years now without any problems.
Just connect it to the battery terminal! The color of the Clip part is also very easy to understand!
I'd recommend it to everyone, because it's never a bad thing to have!
View detail
Cheap!
ValveCore driver, an inexpensive but indispensable Tire replacement
It is hard to think of a use for Mini type.
Body is Color:Gray, chic and likable.
It is not too conspicuous and functional for small tools, which are often orange-colored or large in size.
View detail
In dark and hard to see places!
When looking inside the Engine room under the Seat of the SuCUB, there are places that are difficult to see even in daylight, so this MobileLight is the solution. This MobileLight is easy to use:it can be placed, hung, or attached with a magnet. It can be used for 18 hours with 3 AA batteries, so I think it will last for a long time. It is inexpensive, but it is brighter than a flashlight and very useful. View detail
For Sidecar
I use it for parking on hills and I am a little worried about parking brake alone so I use a stopper on the rear wheel just in case. it fits inside the glove box so when I stop the Sidecar, I just take it out and put it on the rear wheel.
If you have a Motorcycle with GEAR, you can put GEAR in it, but I would recommend it to Scooter owners.
View detail
Reasonable
This is used for areas where the Torque is Large. Measurement is also possible.
Very easy to use.
View detail
What's the use?
The DT50 has a Spark plug hex on the Cylinder head, so it was easy to remove with a MONKEY Wrench.
But with the 4st Engine, it is in the bottom of a deep hole, so the choice is to use Deep socket or a product like this.
It is a standard product that has been around for a long time, but it is still a longtime seller and is easy to use.
View detail
Conversely, Screw is easy to loosen because it is long.
I am not sure if the Torque is accurate or not. I am a little worried about that because it is made in Taiwan...but there is one great advantage.
It is bigger, heavier, and longer than other Torque wrenchs, but fortunately it can easily loosen even the tightest Screw.
If there is a bolt that is too tight, this will loosen it easily, won't it?
View detail
Large Scale
I purchased this for Torque management of Axle Shaft installation.
The wide range of the Torque measurement range could be used for Caliper Mounting Bolt.
The most Large is 210 Nm, so it is indeed Large-sized.
View detail