Reviews
It seems lighter than NORMAL.
[How is it used?
The NORMAL cable was damaged due to age-related deterioration, so we decided to upgrade the cable as a replacement.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It is only to replace the Normal cable, but it is better to record how it is attached with a photo or other documentation at the beginning.
This will be helpful when making Brake adjustments later.
How was your experience with it?
It may be because the Normal wire was getting old, but I think the Stainless Steel wire made it lighter.
It also eliminates Rust concerns and is expected to be durable.
[Included Parts:were they on?
A simple Instruction Manualetc.
[Was there anything that disappointed you?
Not at all.
▼ I never used it to the end because I replaced it with a Disc brake, but I kept the shine intact.
View detail
OEM same etc.
I decided to purchase the Decompression cable as well. View detail
The product I received was different from the picture.
The Cover on the Lever side is not attached.
Different from the product image.
View detail
Used for Active's Brake hose
I installed this as a brake hose support for my SE462 Taiwan 5th generation ACPerformance line brake hose and it goes well with the R.P.M front fork Anodized Color. The best angle of support is horizontal to the ground on my CYGNUS-X. View detail
Fits: YAMAHA CYGNUS X1 5UAFOR JAPAN MODEL, YAMAHA CYGNUS X1 Type 5TY Taiwan, YAMAHA kygnus x2 type 28sfor japan model, YAMAHA CYGNUS X2 Type 4C6 Taiwan, YAMAHA CYGNUS X2 Type 1CJ Taiwan
It's a pain in the ass to replace.
With the OEM Equivalent Product, there is no sense of discomfort at all in the feeling of use.
Replacement is a hassle, but it's cheap and can be done at an early Cycle.
View detail
HURRICANEShort Brake Cable
I was looking for a ShortCable because I had an extra Brake Cable for my LowdownSpec.
Installation is the same as the OEM product and is easy to replace.
It would have been nice to have a Black cable in the same color as the OEM Product.
View detail
Also Brake.
I used it in the Separate handle days.
If you set Separate handle, OEMBrake is too much.
good point
Maintains the operability of Brake.
You don't have to worry about getting tangled up because there is no extra Cable.
A bad point
You don't need to use OEMCable for storage.
By matching the length of the cable, you can get the effect of refreshing the appearance, maintaining operability, and preventing the wiring from tangling.
Keep the OEMCable just in case.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It's not as good as OEM.
It works fine
I bought this wire because I had to buy a new brake wire for my DAYTONA XType SHandlebar, and I thought it would last longer depending on maintenance.
good point
There is also 150 millimeter long, so it can be used for Handlebar Up Type.
It's a compatible product so there are no problems with installation.
It's a good price for the quality.
I've been using it for 2 years with no problems.
A bad point
It is inferior to OEM.
Because the durability changes depending on the maintenance whether it is OEM or compatible, I think that there is no problem that it is a little inferior to OEM.
It's a great affordable option.
View detail
Handlebar and Quantity:Set
I replaced it when I converted to the company's Trucker bar.
Trucker bar is wider than OEM, so it is necessary to change the length of Cable.
good point
Easy to install because it is designed to fit your car model.
●Brake doesn't run badly either. It is neat.
The construction is solid.
A bad point
It is a little pricey.
The price is certainly high, but considering the workability and accuracy of the parts, I am satisfied with the reasonable price.
HURRICANE's parts are high quality.
View detail
Fits: HONDA Dio (DIO), HONDA Dio SR (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio cesta (DIO CHESTA)
AF35 LIVEDioZX Rear Brake Wire
I used Wire injector and OilUp, but it doesn't improve much. There may be a problem in the structure. View detail
I knew it. HURRICANE.
I bought the Brake Cable from Webig, which is a manufacturer I have never heard of, and I couldn't install it because it didn't fit the diameter of the Thailand connector part, so I bought this one.
As you can see, we have been releasing Handlebar and related parts for many years, and we were able to install it without any problems.
The parts that could not be installed took a little longer but were covered by the Gold warranty.
I think I'm going to choose only HURRICANE from now on!
View detail
Fits: HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB)
It was perfect for our model of CUB.
The one I had been using had become reluctant to move.
After all, the movement of a new product is light and smooth.
I should have replaced it sooner.
View detail
A little short?
I used it to service my 30 year old GORILLA. I replaced all the wires (Clutch, Brake and Throttle) and for some reason all the wires were about 20mm shorter than the NORMAL. The installation itself is doable, but it is a bit severe to handle. View detail
Fits: HONDA SUPER CUB 110 (SUPER CUB), HONDA SUPER CUB 110 (SUPER CUB)
OEM substitution
'11 SUPER CUB110 (JA07) I use it for When the Handlebar area was renewed for some reason, it was exchanged accordingly. Recently OEM Product uses NTB if there is compatibility Parts in NTB. I have used it several times now in terms of performance, and I think that it is not a problem at all. Good cost performance View detail
Just the right length.
I bought it at the same time as I changed to KITACO's Lever with Holder, which requires simultaneous purchase of this Cable because OEMCable is not available for Lever with Holder.
Front fork 3.5cm Lowdown and Handlebar is SHIFT UP 4cmUp, which is almost the same length as the OEM, so it was a good length.
Changing the lever will change BrakeTouch and make the brake operation better than OEM. I could.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
Cost performance is good and I am happy with it
I bought it used and had never replaced it since I bought it used, and it's called DAYTONA, which is a cheap price I bought it because it was Brand I'm happy with the quality, but the Rubber cover on the Drum side Wire is short It would be better if the Wire was a little longer to hide it I think it's a good idea View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Thank you for the quick response and Large change, thank you very much!
The packaging was very thorough and the response time was fast, so I was able to work on it during my vacation and will use it as soon as possible Thank you very much and I look forward to working with you in the future View detail
Buy at Reliable Manufacturer
I bought the Clutch Wire from We-Big for Replacement Stock and Carburetor overhaul while Throttle I replaced the wire and clutch wire before they were cut off I feel like I'm lighter View detail
Fits: HONDA Little Cub, HONDA Little Cub 55th Anniversary Special/Little Cub Special (LITTLE CUB 55th Anniversary/LITTLE CUBSPECIAL Knife), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB)
To replace a degraded OEM
Used for LITTLE CUB (AA01)
As the body is 18 years old, we replaced the preventive measures as well as a whole Refresh
Reliability + Quality is the key to OEM Parts, as we are also an OEM Manufacturer No Color and inferiority complex
Now you can ride for a while without worrying
View detail
Fits: HONDA monkey, HONDA monkey
They're allowed to do that because they're Chinese
Even though the picture of the order shows the Rubber's ribs on it
It wasn't attached to the one I received
It won't be allowed to be cheap
Do you think they'll trade you?
View detail