Reviews
The sooner you put it up, the better.
It's not only for dress-up, but also for wheel protection after you buy a new car. It's a great idea to have it on your custom bike. View detail
This is for the off car.
I put it on my CRF250RALLY50.
I've been wearing the Manufacturer's Rim stripe on all my motorcycles for the past 10 years, and using it with the SpokeSkin makes it even more flashy and custom, and it's a Recommendation!
View detail
Good!
More volume in the suspension, which I'm personally happy about!
I also bought a special sticking gauge together, but it took me a while to get used to sticking it!
View detail
Slightly difficult to construct
You can learn how to apply it by Instruction Manual or YouTube, but I felt it was quite difficult to apply it neatly until I got used to it.
So, depending on the motorcycle, I think it's a good idea to practice from the rear exhaust system side, which is less noticeable.
Some bubbles and floats have formed, but it is still firmly attached after about six months of installation.
It's hard to tell from the picture, but to the naked eye it has a decent metallic feel to it. The width is 10mm.
View detail
The imeChain effect is outstanding.
The color choice is important because it changes the whole atmosphere. 6mm is better than 10mm for GSX1300R HAYABUSA. View detail
Let's enjoy with Front and Rear Set.
[How is it used?
Wound prevention of Wheel for mountain play & a little Accent.
Was the one you received as per Image?
It's a quick and easy way to change the look of your foil, as per Image.
How was your experience with it?
Wound and peeling are beginning to appear because I am using it badly in the mountain play, but the purpose is more than enough and the function is fulfilled.
How did it compare to other products?
For Rear18-inches, you can do it with other company's Road motorcycle (for 17-inches), but for Front 21-inches Sticker, it is not sold by other companies, so I think Rival is absent.
Because of the good balance between the thickness of the Decal itself and the adhesive strength of the Seal, you can reapply it right away (if the Decal is too thin or the adhesive strength is too strong, the Decal will stretch or break when you try to reapply it, making it impossible to reuse).
Other items that would be helpful include
Point and hang of installation
It may be difficult to get used to.
The method of spraying diluted detergent on the seal or wheel with a mist spray is easy to position, but it takes time to remove the water because it is unstable until the Gap or water is gone.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
Although the number of domestically produced Dual Par Pass cars is decreasing, please continue to support us.
View detail
Wound is also prevented moderately, and it is good as Accent.
[How is it used?
Accent of the bleak Rim & prevention of Wound when playing in the mountain.
Was the one you received as per Image?
As per Image, it's a relatively easy way to change the look of the foil.
How was your experience with it?
It's been running and tumbling over rubble, so it's Wound and peeling, but it's more than functional.
How did it compare to other products?
I'm thankful that they have Lineup for Front21in. & for Rear18-inches.
Because of the good balance between the thickness of the Decal itself and the adhesive strength of the Seal, you can reapply it right away (if the Decal is too thin or the adhesive strength is too strong, the Decal will stretch or break when you try to reapply it, making it impossible to reuse).
Other items that would be helpful include
Point and hang of installation
It may be difficult to get used to.
The method of spraying diluted detergent on the seal or wheel with a mist spray is easy to position, but it takes time to remove the water because it is unstable until the Gap or water is gone.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
If possible, it would be nice if there were products such as Orange, but there is nothing to say because Color custom order Pran is also supported by HP.
View detail
Fashion starts at the feet?
[How is it used?
I put it on a single color foil as Accent.
Was the one you received as per Image?
The color and Gradation are beautiful as per Image.
How was your experience with it?
Unlike the single color Decal, the order of pasting is fixed, please read the Instruction Manual carefully before starting work. Please read the instruction manual carefully before starting to work.
How did it compare to other products?
Because of the good balance between the thickness of the Decal itself and the adhesive strength of the Seal, you can reapply it right away (if the Decal is too thin or the adhesive strength is too strong, the Decal will stretch or break when you try to reapply it, making it impossible to reuse).
So far, there is no fading and the durability and weather resistance are good? I think so.
Other items that would be helpful include
Point and hang of installation
Sold by MDF "Sticking Gauge for Rim Stripe" I think that it is possible to work comparatively easily if I use it, but it may be difficult if I do not get used to it.
The method of spraying diluted detergent on the seal or wheel with a mist spray is easy to position, but it takes time to remove the water because it is unstable until the Gap or water is gone.
I rely on the Guide and work without anything on it.
[ITEMS TO BUY TOGETHER
as above "Sticking Gauge for Rim Stripe" I think it's relatively easy to work with if you buy
[Opinions and requests to Manufacturer
Color custom order Pru RAN is also supported by HP, please check if you are interested.
View detail
Compatible Size is 4mm/6mm wide!
It is important to note that the width of the Rim sticker is only 4mm/6mm, so if you want to use a thicker width, you will have to cut it yourself with a cutter.
It is also a good idea to degrease the Rim with alcohol before applying the Rim sticker, and then spray the sticker surface with a thin mist of soapy water.
View detail
Good color.
It's a quick and easy dress-up.
It's hard to tell at first glance, but...
When you look at it closely, it looks like "Whoa! I like the way it makes you feel.
The color matches the body of the car and it looks good.
At first I used Plate, which is sold separately, to put it up.
I couldn't use it for GSX-S125 because of the lack of Rim's vertical width.
You can put it without it.
View detail
Definitely useful.
I bought it because it seemed to be convenient when I saw and used various Impressions.
One Side is a "spatula" with a Felt?
I use it for WrappingSeat, Large fine-grained Stickers and Decals.
It's cheap at just over 300 yen, but there's a big difference between having it and not having it!
There is a big difference between fighting with just your fingers and Dryer.
The Felt at the tip is exquisite.
It's like a simple version of the brushes that craftsmen use for CROSS wallpaper.
If you use a slightly stronger stroking motion, the air will be released in a good way.
I think that it is good to say that the person who puts Decal etc. is one Squeegee in a family.
View detail
Dramatically easier to apply with a simple jig!
With a little jig like this, I was able to get the paste position perfect!
The price has never been Large at all, so I highly recommend buying it together.
View detail
Did you put it on your F750GS?
I have used MDF Rim sticker on my R1200R and R1200RS in the past.
When I bought F750GS in November 2020, I put Chinese with LogoRim sticker on it, but it didn't fit the size of the sticker and Wrinkle was formed in several places, so I bought it on webike.
Because the car body is White, I chose White, Delicoroll 10mm, 17&19-inches.
I peeled off the previous Sticker, cleaned and degreased it well, and sprayed it with water and a few drops of neutral detergent.
Size is as selected, and I was able to paste it beautifully without wrinkle or distortion.
I left it for 2~3 days until it was fixed and ran, but there was no lifting and peeling.
I'm not worried about durability because I've worn them before, but I wish I could get them cheaper.
View detail
Cospa best
I like it because it is cheap and has a strong presence.
When you put it on, they sell a kind of jig for sticking it on, so it's Recommendation!
View detail
It's hard to put up.
It was a little Large strange to put it because it is a place with many Curve.
It was surprisingly difficult to put it on while stretching with Dryer and needing soapy water.
Also, there was a spot where air bubbles entered even if it was fine when I put it on.
So you need to wait a little while after you put it on and see how it goes.
It is important to Check while you can reapply.
View detail
I tried to make it White.
This time I bought White.
As expected, I got used to it and finished the work quickly.
No air, no stretching, good quality.
Some are cheap, but peeling off quickly is out of the question.
View detail
After applying, apply Dryer.
Attached to Motorcycle for commuting.
Wheel is the part that is badly dirty, so it is better to clean and degrease it thoroughly before applying.
Also, if you apply Dryer after pasting, the sticking will be better.
View detail
Includes a helpful Instruction Manual
If you follow the Instruction Manual, you can apply it beautifully.
If it's a poor quality one, it will peel off soon or
It's hard to stick, but it's easy and quick.
I use Parts cleaner to clean the dirt off.
I put it on right away and it worked well.
It looks beautiful.
It is also convenient that it is a dedicated Inch wheel.
View detail
Easy installation with mist spray and special guide
The MDF sticker is very durable and the color is excellent, I really feel that first class products are different. The MDF sticker is very durable and the color is very good. It only takes about an hour to complete the job with a spray gun and a Rim stripe tool. View detail
Now Rim sticker will not fail!
I bought this to put a Rim sticker on my new Special Knife Address 110 for commuting. I used it to stretch 6mm rim sticker. It is good because you can never go wrong with it. View detail