Reviews
No cheapness. This is good.
[How is it used?
With the increase in telecommuting, the use of Mug cups has increased.
The desk mat I use is sensitive to heat, and if I put a cup directly on the matte with a hot drink in it
I purchased this as a thermal solution because the Matte had become distorted.
Was the one you received as per Image?
It is more solidly built than I had imagined and not at all cheap.
Most surprising of all. Weight It is
I thought it would be light because it is CarbonMaterial, but it is heavier and sturdier than I expected.
How was your experience with it?
In conclusion, I am very satisfied.
The heat issue I was expecting. [Color] I was able to Clear, so I am satisfied with the product at this point.
The large enough size to fit a standard mug cup.
I have no complaints at all about its function as a Coaster. (It also comes with a proper non-slip surface on the bottom)
As for the pattern, I initially thought about using open weave, but the Review said it would be saggy, so I went with twill weave.
The three-dimensional beauty of twill weave is also expressed properly in the smallest component called Coaster.:It was satisfactory as a Carbon product.
I'm sure there are coasters at a lower price, but that's Carbon.
The sense of ownership is different from that of most Coasters.
[Points to note]
A caution, but not a disappointment.
Surface [Color] Clear paint finish is rough. It left quite a few scratches and irregularities on the surface.
I suppose you could polish it yourself, but you can't polish a matte surface poorly.
That is a disappointment.
Since it is for daily use, I think it is best not to expect too much in the way of finish.
How did it compare to other products?
There is no comparison.
I think there are Cork and SiliconMaterial ones, but Carbon ones are rare.
View detail
Attached to UniversalJacket
I was worried about the iron-on adhesive, so I sewed it on as well. View detail
to save on shipping charges
Depending on the thickness of the phone Cover
As for STAND.
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword)
I bought it and it was a mistake!
SEA BASS OEM parts are sold as diverted parts. band is too long to fix KATANA tool bag + small things, so it can't be used at all! View detail
amulet
I am satisfied with the price because it is not Silver, and it is cheap and has a wide variety of Designs.
It can be attached around the Handlebar, Rear suspension, etc. or as a Key ring!
I have several designs that I like and would like to have at least one more.
I just bought this one and I'm going to use it Plus on my Key ring!
It came in a Suede style Small drawstring, so it would be good for a small present.
View detail
just right (time)
The size is just right for touring! View detail
For Master Tank Cover
The band I was using for the cover of my MASTERReserve tank was getting tired, so I decided to go with the TSR one I had wanted for a long time because of the points I had saved up. The S size was just right as I expected. View detail
Wrist band
zx6r Used in 2019 and looks better. View detail
Good design.
It is an ordinary Clear File, but the design is good, so it is good.
Quantity to a colleague who is a SEA BASS rider.:1pc. I gave it to him and he was very pleased.
Even though I do not own any YOSHIMURA products, I feel good just by having them as a motorcycle rider.
View detail
Easy to use
Brush for hand washing.
Normally, you can wash between fingernails by grabbing it with your fingers. The side brush can be detached, so it can be used in a variety of ways, such as removing it to wash the back of the hand or washing the palm of the hand with the base.
When combined with industrial detergent, it removes dirt surprisingly well.
Recommendation
View detail
Feel on the skin, Psycho
[How is it used?
Used as sweat wipe Towel in Touring.
Was the one you received as per Image?
As per Image.
How was your experience with it?
The Imabari Towel is made of 100% cotton and is very soft to the touch.
The Large is just the right size and does not get in the way when placed in the Back.
Design is another favorite point.
How did it compare to other products?
Wicks away sweat and feels great on the skin.
View detail
Replaced because of fading.
I bought a HandmadeType Band last year and attached it, but it was fading due to UV rays and was no longer looking good, so I replaced it.
This time, we chose Logotype, although it is a bit flashy.
MORIWAKIBlue is ImpactLarge. (Lol) 。
A little thicker than HandmadeType? Longer? It covers the Tank and Cap well.
View detail
ImmeChain from Workman's Wrist band (Lol)
When I changed the spec. around the brake, I looked for a Master Cylinder Band for a certain KIJIMA company, but it was too cheap and I had no choice but to wear Workman's Wrist Band as a replacement.
After that, I did some research and found these items at MORIWAKI and purchased them.
I chose black because there were many colorful parts, and it was the right choice because it does not assert itself too much.
Black is a concern for color fading, but I will replace it when it is worn out for the price.
View detail
Shame about the packaging.
[How is it used?
Used within Garage
Was the one you received as per Image?
Street Image
How was your experience with it?
The quality is good, and it was assembled and used immediately upon arrival.
[Points to note]
The packaging is not in good condition and there are several noticeable dents on the corners of the shelf section. I assembled it with the damaged side on the back, so I don't mind, but it's a shame.
View detail
Present
To the Harley rider who has been a great help to me.
Present.
I was pleased with the Large change.
View detail
Ink does not appear.
The others are fine, but I can't write 0.5Black. View detail
Parenthesis y!
The beautiful Yamaha blue color is a perfect match for the motorcycle.
The embroidery is beautiful and well made.
View detail
Logo is Iron Pudding, so …
The Wrist band itself feels good, but the Logo part of the BEET is Iron Print, so it peeled off after one use. The rest is probably the cost of the Brand&Logo, but I think it's no good if the Logo peels off easily. View detail
Being a Rider is also a casual …
I bought it to casually assert that I am a Rider at work, and I want to use it actively after Cool Biz is released. View detail
It would have been great if Carbon's leaning had been controlled.
[How is it used?
Purchased for MORIWAKITitaniumTumbler.
Was the one you received as per Image?
There was a leaning of Carbon and unfortunately it was not as per Image.
(The manufacturer's note does mention leaning.)
How was your experience with it?
It is so rigid that it will not budge even if you try to break it by human power.
CoasterReverse side (Desk and surface to be installed) comes with Rubber's non-slip surface, so it will not slip.
[Points to note]
Naturally, the appearance varies considerably depending on the choice of twill weave, plain weave, or open weave.
Among them, it must be quite difficult to control the leaning of Carbon in open fiber.
If you are nervous, choose plain or twill weave.
View detail