Reviews
Effective, but Large to put on and take off.
[How is it used?
I have seen several photos of Boots rubbing and peeling off the Frame paint, so I installed this as a countermeasure.
Was the installation difficult?
The O-ring? that comes with the frame is used to secure it to the frame, but I had a hard time because the gap to pass it through is very narrow.
How was your experience with it?
I feel that Frame is well protected.
However, dirt and water accumulate between the Frame and Protector, so it needs to be removed and washed periodically, but it is Large strange to attach and remove….
View detail
For the heat.
I bought it to prevent the frame from getting hot when stopping or driving at low speeds. I haven't done any touring yet, so I'm not sure how effective it is at preventing heat, but the dress-up effect is pretty good. View detail
SCRAMBLER
If you want to look like a SCRAMBLER, this is for you!
But it's expensive!
But I'm happy.
View detail
Beautiful finish
Introduced with full carbonization.
It is beautiful and Fitting.
View detail
CRF250RALLY 2021 Non-conforming
ZETA Zeta Frame guard
Item Number:ZE52-0019
■Type:Material:5000 Series Aluminum Alloy
Remarks.
Please note:This product is not compatible with your vehicle.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FE350S, HUSQVARNA FE450S, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150I, HUSQVARNA TE250I, HUSQVARNA TE300I, HUSQVARNA TX300I, GASGAS EC250, GASGAS EC250F, GASGAS EC300
Stable ACERBIS!
Easy to install, only takes 5 minutes, looks great and functions well. View detail
If you want to do a standing
Grip feeling when standing is considerably improved.
Exclusive Design allows you to remove some of the OEM parts and install it as is with Bolt On.
The important Guard performance is unknown as it will be field tested, but it will probably perform as expected.
View detail
To prevent heat
I bought it as a countermeasure against heat during touring because the Frame gets so hot that it seems to burn during touring in midsummer.
It was very easy to install with Double-sided Tape, and there was no problem if the positioning was done carefully.
It was thought that it was a heat measure, but it is a feeling that it is possible to forgive it even if the effect is a little sweet well Parenthesis.
View detail
Fits: YAMAHA YZ250F, YAMAHA WR250F, YAMAHA YZ450F
Whether to choose Poly sports
I installed this on my 2016 YZ250FX.
Material:There is another PlasticFrame protector made by Poly sports, but the mounting method and materials are almost the same.
The prices are about twice as different.
One of the biggest differences is that ACERBIS uses a different material, black resin, for the area where the boots hit, to improve the heel grip.
I spec'd both frame guards, and it's true that ACERBIS's grip is a little bit higher than ACERBIS's, but I couldn't feel any large difference in my level.
I remember that the difference of Grip was a little more large in the new state, but the difference gradually decreases because the surface is worn with fine scratches after repeated use.
Material:It is plastic, but I think durability is high because there was no damage at all even if I used it for 4-5 years.
Poly sports made is also still about 1 year old Spec. so durability is unknown, but it looks not bad.
Tie bands and anchor bolts are included in the kit and can be installed without any problems. However, the tie band for the rear brake master cylinder is not tight enough and it slips every time I drive.
Because the body doesn't come off especially, I only put it back when I get a gap, but I think that the dust adjustment around Master Cylinder is a little weak.
There is only one point to note when using this Protector.
There are several CushionDamper on the FrameReverse side, but if you use it for a long period of time, it will leave a mark on the Frame side that cannot be removed by PIKAL.
It is recommended to use cushion material such as Sponge when installing the Protector.
Protector's defense is high enough.
It also prevents a lot of damage from falls as well as chafing of boots.
I think it is a good part to install even if you think about the resale value for a long ride.
By the way, if I washed the car normally, there was no mud left between Frame and Protector.
View detail
High cost performance.
I think there is another frame protector made by ACERBIS, but you can buy one made by Poly sports for about half the price.
I have used the ACERBIS frame protector on other models, but the difference is that the heel is made of a different material.:It is available with or without Plastic Guard.
I think the ACERBIS Protector has a slightly better heel grip than the ACERBIS Protector because of this.
However, I felt that it was the difference of the degree that I did not mind. I don't think there is any particular thing that becomes slippery when this Protector is installed.
The overall shape and the method of inserting BoltAnchor into Swing arm pivot and fixing it to Frame by Tie Band are almost same.
I think the strength and durability of the whole Protector is almost the same etc.
The protection is good, and the OffBoots are mostly protected from scrapes, falls and stepping stones.
The product comes with all the (presumably weatherproof) Tie Bands, Anchor bolts, etc. for installation and is ready to install.
There are many cases that Poly sports plastic parts are not well made and the screw holes do not fit, but this part is not something that you have to adjust, so it was not particularly difficult to install.
I think the Brake pedal needs to be removed.
By the way, the ACERBIS Protector has a Rubber Damper on the back of the Frame to prevent the Guard from rubbing against the Frame, but after long term use, the Damper left a very strong contact mark on the Frame.
Based on this experience, I put Universal's Protection sheet on the Frame in advance of installation to protect it.
It's not a place for rust, so thin adhesive Sponge tape is fine, but I think anything too thick will interfere with the installation.
To be honest, I was not sure about purchasing the ACERBIS product which is twice the price, but at this price, I would definitely recommend installing it for when you resale.
View detail
crf250rally ACERBIS X-GRIP FRAME PROTECTOR
My 2020 crf250rally has a hose fixing bracket on the left part of the frame, so it's a bit misaligned, but it fits well when I press it with force. fixing bracket on the left side frame, so it doesn't fit well, but it fits well when pressed with force. It is made of plastic and is mounted with a cable tie. View detail
That's what I'm talking about!
CLEVERWOLF's Carbon frame cover.
I've been waiting for you!
Texture, strength, design, and security… all as expected...
View detail
The finish is messy.
The surface finish is textured, dull and wound. View detail
magical Racing
I'm not sure if it's a good idea to use double-sided tape, but I'm sure it's a good idea. View detail
Mounted for frame protection
I installed it to protect the Frame from being scraped by OffBoots.
The build is made of thin aluminum, so it is unlikely to be able to withstand large impacts.
I thought it would be enough to prevent scratches from rubbing with Boots.
If you don't mind the scrapes, you don't need them.
View detail
Fits: SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X ABS, SUZUKI SV650 ABS
WildeTaste makes it cool!
Tuck Roll Seat and Quantity to add a little SCRAMBLER Image to the plain sv650.:I bought this in a Set. No problem with installation accuracy as it is OEM. View detail
Fits: KAWASAKI KLX230, KAWASAKI KLX230R S, KAWASAKI KLX230R
If you buy it, you must install it.
The frame around the footpegs of off-road vehicles is where the boots tend to rub against the frame, and the paint peels off easily, and we often see old motorcycles that have rusted.
The OEM Attachment sells them at this price, which is reasonable. The quality is not great, but the installation is perfect since it's OEM, and I'm happy with the price tag to buy it again if it breaks.
I think this part should be installed at the same time you buy the vehicle, rather than looking for something else.
View detail
2.4
Installation/accuracy:It is atrocious. You have to bend the Bracket many times to get it in a compromising position.:Pair (for Left and Right) It is difficult to get into a symmetrical position. It is bone-breaking.
Quality/texture:the FRP is still Plus Chickie. The lack of thickness makes it look cheap.
Performance/functionality:the OEM carburetorCover doesn't have a concept of heat shielding, but this one does.
Shape:Not too much, not too little.
The Seat is later scraped off and the Seat Cover is removed.
Cost performance:This is a bit disappointing for a Gold amount of more than 10,000.
Overall rating:no.
View detail
zeta frame guard [ZE52-0215]
may i used the zeta frame guard on my drz400sm. this frame covers are large and light weight and perfect fitted in the frame, this item manufacturer design are looking smart and very strong aluminum material. this frame guard very easy to install. i will recommend. View detail
It doesn't mean anything.
It doesn't work particularly well for me as I don't do Race when I put it on, but I think it's a good dress-up.
Frame to Material:Carbon Style looks good in Parenthesis.
Also, I think it's good that the car body doesn't become extremely heavy even if it's Carbon.
I think it's a completely self-serving thing to put on.
View detail