Reviews
It is a good product
I was thinking about what to put on my precious bike
I bought this to try to install an engine guard.
Why did I leave a review after 4 months of purchase?
Yesterday I fell over and thought the bike would be seriously damaged.
Fortunately, the engine guard was slightly bent and the accessories blocked the impact, so the bike was fine.
The bent guard pipe and parts are planned to be purchased separately and replaced. -------------------------------------------------- -------- I'm thinking about what to put on my precious bike I bought the engine guard and bought it like this. The reason why I left a review only four months after I bought it was I thought yesterday that the bike fell and the bike would be broken. Fortunately, the engine guard bends a little and the accessories prevented the shock, so the bike was fine. The curved guard pipes and parts will be separately and replaced. Powered by Google Translator
View detail
Fallen cannibals
I used to think that Engine Guard was ugly and embarrassing.
Considering the cost in the event of a fall, I decided it would be better to put it on.
I like the fact that it is not that Large in design. It is also firm when installed.
View detail
Stylish
I like the upper volume of the parts. The appearance of the installed parts is rugged and rugged, but when you ride on the car, it doesn't look so assertive, and the image is slim. View detail
Engine Guard
This is the first time I have purchased and installed Engine Guard. 。 After some trial and error, I managed to install it. 。 I am very, very satisfied. View detail
I was able to install it without any modification.
By adjusting the mounting, I was able to install it neatly and without any modification at all. I think the cost performance is high. View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
These are the Items I wanted!
I have been wanting these Items for a long time.
The installation is only to fasten Bolt, but since it is where the Engine is fixed, it requires force to loosen it, and it is also dangerous if it is not fixed Firmly.
It will look a bit lumpy after installation, but that is a sign that it is protected, so it looks cool.
It is reassuring to know that Guard is there to help in an emergency.
View detail
Not too much, but not too little, just right.
Good looking and well made. 。 Effectiveness is unknown because it has not been tipped over. View detail
It was installed on a 2023 Rebel 250 with no problems!
[How is it used?
I am so comfortable with it that I forget that it is installed.
I put it on when I heard that the curb can break the Engine when it is knocked down.
Fortunately, we haven't beaten them yet, so Engine Guard has never been active.
Was the one you received as per Image?
Yes
Was the installation difficult?
I had it installed when I purchased my new car.
I wasn't sure about the tightness of the bolt when I installed it, etc.
I asked to have it installed at the store so that it would function properly if I had to.
How was your experience with it?
It blends in so well that I forget I'm wearing it.
I like it because it doesn't destroy the original design.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you don't have experience, I thought it would be a good idea to have the safety equipment system installed at the store just in case.
View detail
CT110 HUNTER CUBJA55 Engine Guard
The appearance changes considerably.
It felt stable.
View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor
Discreetly Cover Engine
Installed on CB400SF.
It is good that it is inconspicuous.
Installation was easy by myself.
I haven't tipped it over yet, so I don't know how effective it is, but the Engine part seems to be well protected.
View detail
Strong and durable guard bar
My motorcycle is HONDA CB400SF. I bought this bumper to support the car body when the car body falls down slightly, so as to reduce damage to the engine and the car body. Moreover, this bumper is equipped with rubber pads to reduce the damage to the car body. The damage to the frame caused by the installation is small, the screw hole design is reasonable, and the installation is simple and worth buying. -------------------------------------------------- -------- My motorcycle is HONDA CB400SF. It is to buy this barrier to support the car body with a barrier to reduce the damage to the engine and car body when it falls slightly. Smaller installation is damaged to the frame , the screw hole is reasonable, and the installation is simple and worth buying. Powered by Google Translator View detail
Looks good, but dissatisfied with details
It looks good, so when I put it on, I was just about satisfied.
After getting on board, I noticed some problems.
On the Left Side, the Pipe is only halfway up, and when the foot is slightly forward, the
You will hit it on its termination. If it's just a little Turn and you put your foot out and hit it.
It only hurts, but if you fall or collide with something, you can get a bad shin.
I think there is a possibility of bumping it and injuring yourself.
Even though Touring and Circuit can have Protector from the knee down.
I don't usually do that much, so I think there is a problem.
The Left Side Pipe is only in the middle because the Bolt of EngineRear is hidden by the Cover.
It seems to be because you can't stop it from extending that far, but don't end up there, just in front of the knee.
It would have been far better if we could have bent it and brought the termination part forward.
We had no choice but to fabricate Cushion material and cover it.
Incidentally, when I fell once on the Right Side, Engine was protected without any problem, so
If you do not fall down many times, you may say that the Protect performance of the Right Side is good.
It's just that Material:It is lightweight like aluminum, but it was shaved quite a bit in one fall.
If you expect to fall many times in Gymkhana-like exercises etc., you should look for something for that.
It might be good.
View detail
stupid design
A big problem occurs when replacing the air cleaner (filter). One bolt of the air cleaner box cannot be removed due to the interference of the guard. According to the standard, you need to remove the guard, replace the air cleaner, and install the guard again. Very inconvenient. View detail
Fits: KAWASAKI ZX6-R, KAWASAKI ZX10-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R
It's a perfect MATCH.
It is easy to install without interfering with decals and pads. I will not know the effect until the time comes, but I am satisfied with the appearance of the product. View detail
The strength seems to be sufficient.
Tanks and Engines do not seem to be damaged when they are knocked down.
Just Quantity:Pair (for Left and Right) The output of the Quantity:Pair (for Left and Right) I was slightly concerned that it was not symmetrical.
View detail
I like the vertical line.
The engine and vertical line of GB350 are integrated and fit together beautifully. I was worried about the plate part due to its structure, but the actual product is thicker and that solved the problem. View detail
Installation of Engine Guard for YAMAHA Tracer 9GT
I think the YAMAHA Tracer 9GT has a low center of gravity, but I'm 170cm and can stand on both toes.
Even stopping at traffic lights is a daunting experience.
I was hoping to fit it for the purpose of protecting an elderly Rider's legs in the event of a fall.
I decided to buy it immediately because it was on sale at a low price by Webike.
Our concern was the difficulty of the installation process.
The EngineBody may slip down when the EngineBolt is removed.
I read in the Instruction Manual that it was better to support it with a Jack.
I don't have any Jack's with me, so it's like a wood sleeper.
We inserted it under the Engine oil pan and started working on it.
Not to worry, if you take the Bolt on and off one by one, it will not slip off and is Large sturdy.
Torque is applied very strongly and it is hard to loosen Bolt, so it is better to devise a Wrench Lever.
As a precaution, check the length of the Bolt in the Instruction Manual to ensure that it is installed correctly.
I, an elderly Rider who is not an expert in Motorcycle maintenance work, but relatively knowledgeable.
View detail
If anything, it's for looks.
For Guard, it's more like a Classic.
I wear it as a stylish point of view.
I am satisfied with the Large change in that respect, but it is still made.
It is solid and heavy in its own way.
I think there are pros and cons there.
I fell over once, but in the end it all depends on the situation.
Bar end mirrors are available.
There is nothing we can do about it and we have scratches on the Tank.
BoltQuantity on the Under Guard side for some reason.:2pcs.
I cut off the whole Plate because it didn't fit in any way.
Uses.
Not a good match with Performance damper
No, but the installation itself is possible.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
It's a reasonable price, so one more step.
I have no problem with the appearance, etc., since the price is reasonable, but I would like the Bolt to be an anti-theft Bolt or a Plating Bolt. View detail
Fits: HONDA CL250, HONDA CL500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250, HONDA Rebel500
strong bumper
My motorcycle is HONDA REBEL500. Although this car is relatively low, it will cause a lot of damage in case of reversing, so I bought this DAYTONA engine bumper from webike. This sturdy engine bumper has a diameter of Φ25. 4. Made of steel pipe, it can be installed directly without damage, and can be installed with various accessories of the handlebar with the same diameter as the handlebar. -------------------------------------------------- -------- My motorcycle is HONDA Rebel500. Although this car is relatively low, the loss of reversing is also very large, so I bought this Daytona engine bolt at Webike. This sturdy engine bolt was φ25. 4 Made in steel pipes, directly install without loss, and the same diameter of the handle can be installed with various accessories. Powered by Google Translator View detail