Reviews
Originally, although this product was used for the height adjustment of a mirror, I purchased for the tapped hole protection by the side of a receptacle. That is, although the scalpel thread part of the master side of a brake or a clutch is made of al
Originally, although this product was used for the height adjustment of a mirror, I purchased for the tapped hole protection by the side of a receptacle.
That is, although the scalpel thread part of the master side of a brake or a clutch is made of aluminum, the mirror side will end up the tapped hole of a master side becoming foolish, and carrying out recoil or carrying out master exchange, if the mirror is frequently desorbed for iron.
If it is most Rider, he will think that desorption of a mirror is not made almost, but if it participates in a gymkhana practice meeting, in order to avoid breaking a mirror at the time of a fall, a mirror will certainly be removed.
Since about one roll of the upper part by the side of a scalpel screw thread had deleted a few for that reason, this product was purchased.
Since both sides change the screw-thread portion desorbed frequently to iron by using this product, it is an intention that a thread part can be prevented from becoming foolish.
Although structure's is good, since it is not having it described whether it is used between master sides whether it is used between mirrors although the goods themselves are described in the using-merely certainly-attached washer description, it is unknown in which.
Since it will turn also around this spacer both together with the nut of a mirror when removing a mirror if it equips for the time being and does not attach to a master side, I have equipped the master side.
It is somewhat more smallish than the nut (17 mm) of a mirror part, and a crevice is made for a while with the spanner of KTC in the size of the about between 16 mm and 17?.
Probably, as goods, it will be better for it to be satisfactory since torque is not just going to start, but to unify this neighborhood into 17 mm.
Since the range which is visible by a mirror spread as a result of the elbow portion with which it moved and the mirror part was crowded although a 2-cm location only rose becoming an upper arm part, it was a delightful by-product that the back check became easy.
View detail
It purchased to fix not an original manner of use but the monitor holder of the navigation for motorcycles (mini gorilla). If it is a certain manufacturer's mounting system, it will be satisfactory, but for me, it is a large sum. Although some dev
It purchased to fix not an original manner of use but the monitor holder of the navigation for motorcycles (mini gorilla).
If it is a certain manufacturer's mounting system, it will be satisfactory, but for me, it is a large sum.
Although some devices are required, since this stay folder excels [ texture / reinforcement and ] in cost performance, it will surely function enough as a base of navigation attachment.
If attachment is completed, I will introduce anew.
Language of gratitude in correspondence quick [ Mr. Webike ] and polite first of all.
View detail
It was used when FZ1Fazer was handle-mirror-ized. Since the visibility of the external mirror was not quite satisfactory, it adopts here. It came to be able to carry out the back check of only its arm having been visible just.
It was used when FZ1Fazer was handle-mirror-ized.
Since the visibility of the external mirror was not quite satisfactory, it adopts here.
It came to be able to carry out the back check of only its arm having been visible just.
View detail
I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased. Only at one of the two, since height changed, it has been improved by purchasing an adapters on either side.
I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased.
Only at one of the two, since height changed, it has been improved by purchasing an adapters on either side.
View detail
To compensate for attachment of the master cylinder of a brembo, the goods here were chosen for mirror attachment. Since tank stay was also needed, stay and a mirror holder also considered the thing of the antlion of one, but since the color of the mi
To compensate for attachment of the master cylinder of a brembo, the goods here were chosen for mirror attachment.
Since tank stay was also needed, stay and a mirror holder also considered the thing of the antlion of one, but since the color of the mirror holder did not suit the master main part of the brembo too much, the color of shot gray of this product was chosen.
Since it is a master main part and the same color if it is this color, it is not uncomfortable even if it equips.
Although it is a master main part and the same color and also the mirror holder with a brembo logo had also come out from the brembo, since the price carried out in more than Bai of the goods here, the posh thing was chosen eventually.
Even though there is no brembo logo, it is cheap, and since appearance also becomes good, it is very pleasing!
View detail
It has ridden on D trucker. This product was attached when a mirror was made into Napoleon's Klos 3. Since it was an off vehicle base, when the usual mirror for a road was attached, since height was a little low, the back check carried out and it
It has ridden on D trucker.
This product was attached when a mirror was made into Napoleon's Klos 3.
Since it was an off vehicle base, when the usual mirror for a road was attached, since height was a little low, the back check carried out and it was hot, but rearward visibility becomes markedly good by raising height.
It is w although it is good to become early detection, such as a knight on a white horse.
View detail
It used in order to avoid interference with the shield at the time of attaching the windshield for little cabs to a super cub, and a normal blinker. The result was exactly. Since it is not too bad, they are three stars.
It used in order to avoid interference with the shield at the time of attaching the windshield for little cabs to a super cub, and a normal blinker.
The result was exactly.
Since it is not too bad, they are three stars.
View detail
Since SHIKKURI [ the stay of the changed mirror / the range which has much view point movement and in which it looks short a little ] somehow, he thought the object for adjustment and bought the trial. Although my ERIMI is a 10-mm right hole, the atta
Since SHIKKURI [ the stay of the changed mirror / the range which has much view point movement and in which it looks short a little ] somehow, he thought the object for adjustment and bought the trial.
Although my ERIMI is a 10-mm right hole, the attached touch becomes like a photograph.
It was small, or although set to 10-mm UP, there was an effect which Colet matched very delicately and meant.
Although I think that it is various and whether there is any effect in the condition of a vehicle type or a post-installation mirror, in my combination, it is a best match! .
It is based and they are five stars!!
View detail
It is used for ZRX1200R. Although a pure mirror attaches a brake clutch to a master side, when only a clutch is changed into an external article (NISSIN), the mirror fixing position has shifted to order and a vertical direction. It purchased in or
It is used for ZRX1200R.
Although a pure mirror attaches a brake clutch to a master side, when only a clutch is changed into an external article (NISSIN), the mirror fixing position has shifted to order and a vertical direction.
It purchased in order to unite a location on either side.
Structure is solid and texture is also high.
Mind of the kana whose price of 1575 yen is somewhat high is carried out.
View detail
A mirror position can be finely tuned more with the outside, the front, etc. It was satisfactory although I was feeling that vibration will be amplified by attaching this.
A mirror position can be finely tuned more with the outside, the front, etc.
It was satisfactory although I was feeling that vibration will be amplified by attaching this.
View detail
It is used by VTR250. By clutch lever change, since the left mirror became inside just for a moment, it purchased. It became legible.
It is used by VTR250.
By clutch lever change, since the left mirror became inside just for a moment, it purchased.
It became legible.
View detail
Fits: BMW R1150GS, BMW R1150R, BMW R1150RS, BMW R1200C, BMW R1200GT, BMW R1200RS, BMW R1150GS, BMW R1150R, BMW R1150RS, BMW R1200C, BMW R1200GT, BMW R1200RS
It purchased in order to attach a general-purpose mirror to the special mirror attachment portion of BMW, but the method of cling is also simple and it has also satisfied the settlement of a general-purpose article mirror very well.
It purchased in order to attach a general-purpose mirror to the special mirror attachment portion of BMW, but the method of cling is also simple and it has also satisfied the settlement of a general-purpose article mirror very well. View detail
It purchased to height control. if it equips -- since a design is simple -- completely -- an original manufacturer's product -- as if -- it is natural touch. I think that it can equip that there is no sense of incongruity in any motorcycles. T
It purchased to height control.
if it equips -- since a design is simple -- completely -- an original manufacturer's product -- as if -- it is natural touch.
I think that it can equip that there is no sense of incongruity in any motorcycles.
There are also the object for the diameter change of a screw and the object for the reverse screws of a yamaha vehicle else [ for height control ], and the choice of a custom mirror spreads.
Since it is entering one piece, the place which can purchase only a required part is also a delightful point.
A price is also handy, and since it is a mirror manufacturer's goods, it can purchase in comfort.
View detail