Reviews
Vantage
It's good in terms of feel, the exhaust pipe area was burned and dull in color, so it did a good job of hiding that. View detail
Good quality, good price!
The exhaust pipe of the rear bank is too close to the exhaust pipe of the DUCATI Exhaust System Up Type, and my thighs are going to be burnt.
There is a heat shield between the TrellisFrame, but it's only a temporary solution, and more importantly, the rear suspension is hot and definitely not good.
So I decided to roll a Vantage! So I bought it.
Vantage is a very expensive Image and I was prepared to spend about $5,000, but this product is sold by the meter and the price is cheap!
The actual distance is about 20cm, so I bought 2m and used half of it in 1m, but it was not enough. After all, it is safe to cut it longer at the time of construction.
I checked how much it changed after installation. It is natural, but the radiant heat is reduced even by one layer, and the temperature rise of the thigh and Rear suspension is suppressed. I expect the effect especially at the time of traffic jam.
The quality is good and no problem, and the price is cheap so you can recommendment.
View detail
Prevent burns!
[How is it used?
In an effort to increase the number of OffLoaders, we are co-owning a CRF125F as a RenBarrel vehicle.
The other day, when I borrowed it at the Race, I was unlucky enough to burn myself with the exhaust pipe when I fell, so I rolled up the Vantage.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I wet it in water and rolled it up with some Overlap.
All locations except the start and end points are fixed with Wiring.
How was your experience with it?
It was my first time wrapping it and it was easier than it worked and didn't sting as much.
[Included Parts:were they on?
It contains 5 Stainless Steel Bands.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I like MINIMOTO's Large that even these parts are prepared reasonably.
View detail
Fits: HARLEY-DAVIDSON Universal
The ideal finish.
The exhaust pipe has a high heat insulating effect which helps to prevent burns from the exhaust pipe. It takes some effort to wrap the pipe around the exhaust pipe, but it looks great on the American. View detail
The width is …
The length was no complaint, but the width was hit. I'm sorry I didn't check it properly, but if you're buying it, make sure you check the width size. It's only half as wide as the bandage on the Image. Also, there are no Included Parts:only the VantageBody is included, so it is better to prepare Tie Wrap and Needle Gold. View detail
You should've chosen this from the start.
The exhaust system of 125Scooter was leaked and I repaired it with this product, heat hardening Pate and Gold Band.
Chinese at first. (?) I wound up with a heat resistant Band of the same name, but it only lasted a week of commuting use, and soon became holey and shaggy and unusable.
However, the durability of this DAYTONA product is perfect.
View detail
Rust Prevention.
CT110CT110 HUNTER CUB is used to prevent the part where the asbestos of the exhaust pipe part rusts easily. Because the part where there is asbestos is rusty easily, it uses it for prevention. The heat resistance seems to be high. View detail
It's itchy.
It's a copper color, but when heated, it becomes a shiny olive color with a blue tint.
This is so cool, it's Military chick.
If you want to roll it up nicely with a 25mm width, you'll have to roll it up pretty dense.
I wanted to cover the area from the bottom of the oil pan to the exhaust system, but it didn't seem to be enough even with 5M, so I didn't pile it up and rolled it up properly.
Even if it's a proper winding, it's effective enough to lightly touch the hem of the rain jacket right after the Engine is stopped.
View detail
I think it's good
It's more expensive to buy at a motorcycle supply store.
This item is cheap to buy in the length you need.
But the color will come off after a few rainy runs.
Think of it as a consumable item that you replace once a year.
View detail
I'm not complaining because it's cheap.
You should definitely work on it in water.
The prickle attacks all day long.
Also, it is hard to wind the R part because it is 50mm wide.
I still feel that about 30mm is a beautiful finish.
View detail
Buy it if you don't want to roast your own feet.
Car models installed
This is a 2004 250SB
It is said to be 250SB, and the one who does not have a pin is considered to be Large and a half, so...
In a nutshell, it's a D Tracker with a SEA BASS Cowl
Purpose of purchase
I bought it to prevent my feet from getting roasted.
[Product Information]
1 meter per 1 pc of product sold, so if you want to buy 5 meters, you can buy Quantity:Buy 5pcs. and you will receive one Vantage of 5 meters.
【Impressions】
The smell of baked potatoes during the touring.
Just when I thought I was getting hungry or something, I saw White smoke coming from my Right foot!
Yes! The smell of a baked sweet potato is the smell of burnt pants on the Exhaust System! Ta!
If you're riding an off-road motorcycle or the exhaust pipe is in contact with the exhaust pipe, it's not a good idea. I think everyone who is in a position to do so has experienced this.
YOSHIMURAFull Exhaust System was originally installed on this car, so it is Heat Guard was also ironclad.
I thought that if I didn't, I would have the branding of Yoshimura on my right foot. Purchased at Meter.
There are some people who wrap it over the Heat Guard, but I took off the Heat Guard and wrapped it directly over the Heat Guard. I wound up.
The key points for installation are
Soak them in water before rolling them up.
Decide where you want to start winding and stop at the band first, then wind it up.
I'm going to curl it up while tightening it up.
Be sure to wear gloves when performing this work as your hands will get extremely itchy if you don't wear gloves.
And so on
When I rolled it up, the pants didn't get burnt, but the raincoat and the fiberglass ones that are weak to heat (Rucksack strings etc.) will still melt, so be careful.
View detail
Fits: HARLEY-DAVIDSON
It works as well as it should
Motive for purchasing
I bought it because I wanted to wear it almost as a matter of appearance in my case
I have a W800, but it's air-cooled, so the heat doesn't really cool down, so I hurriedly went to the Motorcycle The exhaust pipe part that sticks out in front of the car when the cover is done I've had to melt my motorcycle cover, etc., to prevent that from happening This is how I came up with the idea
Good points
It looks so much cooler now
As I had originally planned, I used the exhaust pipe to melt the motorcycle cover and other parts of the motorcycle I don't have to deal with the problem anymore
Also, when I'm running after getting wet, I can smell the amazing burning smell along with the steam, but at first I didn't want to I thought it was a good idea, but once I got used to it, I started to feel like this was a good idea
What I liked about it
I think you'll struggle to choose a length
In my case, I used it in W800, but I am familiar with a similar type Motorcycle, because someone else had purchased a similar product and asked for their opinion Quantity:Pair (for Left and Right) I bought 15 meters of it together
When I wrapped it up, it was really Exactly and not that much more
If it's too long, it's no problem to cut it off, but the expense will increase, and if it's too short, you'll have to wind it up and use it to make it more comfortable You can rewind and adjust it if it's not enough, or you can reduce the part of the roll to adjust it It is not possible to buy more and continue to roll them
So you can get a rough idea of how much you need according to the type of car and length of the exhaust pipe I felt it would be good to be there
Installation difficulty
I had quite a bit of help wrapping it around the person who told me a lot about it when I purchased it
The length of the exhaust pipe is wrapped around the pipe while stacking it 1/3 of the way I felt that I had to take into account all of those factors and choose the length
In addition, it is better to wrap the exhaust system at the intersection of the exhaust system and where there is little space between the body and It was slightly Large strange
View detail
Ossified Items! but certainly not hot!
I didn't care about the function or anything else, I bought it for fashion
Stainless Steel Band is Quantity:It came with 2pc, but I didn't use it and used Wiring to hold it in place
I was able to roll it up without it stinging without getting wet like it used to
The color is neither White nor Black, but a dull Brass-like color
I think it's a good idea because it's weird, even in Polished's pure white
It's a two-cylinder, so it's not enough for the Limit (it could have been if I had done it right):2pc. Set used
I don't particularly care for the performance, but it's certainly not hot
Even with the engine running, it can touch the exhaust pipe for a short time
View detail
I like it wide
I didn't have it in stock and it was only available in a narrower width, but I still preferred the wider width
There is a smell at the beginning of use, but the smell goes away after a while, so no problem
What are the benefits of doing this? But I'm doing it somewhat to protect the exhaust pipe
View detail
I can satisfy my self-interest
XELVIS, where the temperature difference between the front and rear banks is a weak point (VT) It is used for the front exhaust pipe
It's long enough to double roll and the included Stainless Steel Band is a nice touch
Product Description Uneven color But it doesn't matter if you can burn it
The effect was to reduce overcooling and keep the water temperature gauge slightly higher than it was before installation
Maybe it's Brush-bo, but it's nice
View detail
That's right..
I got it because it's black
get wet and dry
get wet and dry
get wet and dry
The color will fade in three to four months..
I'm happy with the original purpose of this product, which was to prevent burns
View detail
In the beginning
The color drains and becomes Silver
It's Silver before summer, such as during the rainy season
View detail
Easy to roll
At first I purchased it for MONKEY,
Because I wound a different Vantage, now I am wrapping around BW'S for the purpose of hiding rust.
It is easy to wind as much as the width is thin.
I do not know about performance,
Rust hid, and maybe a little bit like a mess.
BW 'S does not see much Exhaust pipe ? ? ?.
View detail
Is it a bargain?
Because MONKEY's Exhaust System has become rusty,
I bought it for hiding rust.
It has a length of 5 meters, and I think that this price is cheap with five Stainless Steel Band..
I think that it was better to have gloves, long sleeves, long Pants, Mask when installing.
Working with short sleeves, my arms are tingling and itching itching.
Since the thickness is only this thickness, it would be nice if there was a little thinner ? ? ?
I do not know about performance (Lol)
View detail
Fade quickly
Picking Black attracted by Cost performance.
With regard to installation, there is no problem as it can be confirmed on HP of GOODS.
Odor comes out until it gets familiar with color fading early..
View detail