Reviews
It is a muffler that is seriously built in.
This time, WR 's company, read the blog of the developers and got to purchase. In order to shorten the installation time, it was assembled to some extent at the time of packing and installation was easy.
Good quality.. Performance : I feel that Axel became lighter after installation, and the feeling of acceleration of acceleration at the time of valve change was realized compared to normal muffler. Sound quality is good sound with bass feeling at idling.
Accelerated sound Normal muffler slightly sounds loud Lighter but just sounds good (Feeling sound)
As for price, I think that this muffler of WR'S is seriously built up. Still it is sold at a price range which cuts down 55,000 yen when it says finely by Mr. Webic think cost performance is good.
View detail
Both sound and performance are the best!
I made this Slip-on Silencer by exchanging my first Exhaust System.
I was worrying about MORIWAKI 's Slip - on Silencer or WR'S, but I could not like the color of MORIWAKI, and since the developer got the enthusiasm and the information of Silencer from the developer on WR' s blog, I did it here.
At first I was planning to purchase Carbon, but as sunburn by sunlight seemed to be coming, I made it to baked Titanium.
Black cb 400sf I was more than I thought.
Installation was only with 12 mm Wrench and Pliers. 12 mm Wrench is Quantity : If 2pc you can not enter Pliers.
It was my first exchange, but I finished around 30 minutes.
It feels like it got easier to handle it because it got lighter. How to raise the speed is faster. I am doing Power up. I do not feel the slow Torque has decreased.
Sound sounds deep bass elegant and cool!
View detail
Reliable and reliable WR'sOEM Product
When I came back from Touring and maintained it, I noticed that there was no resin at the end of the Footpeg Bar, and when I tried searching Wes Big quickly, I discovered that the name was this, but there was no image Because there were not too many people, when I contacted Wae Big, the reply on the next day! Apparently I contacted Manufacturer and confirmed it.
Well Big, thank you!
I ordered it immediately as I understood the same parts as I thought! I ordered in the evening and it arrived the next morning. It's really fast!
It is a product ......
Since there is no image, I posted a picture.
As you can see, the black end of the bar : It's Cap of Plastic! The inner diameter of the bar is π 15 mm
Material : PlasticCap is also 15 mm with Vernier calipers, but when I attached it to the end of the bar, I felt a bit moving and I felt like coming off with the running vibration, so I filled the gap with Double-sided Tape , I installed it by pushing it a little bit!
It looks as perfect as it was before!
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3
It is recommended
I compared the sound of each Manufacturer on YouTube and decided on this. I like the sound of 4 bunkers at low tone, the weight is also half of NORMAL. However, the Motorcycle parked next to me fell down to the side by the wind, and it got dented, I had trouble. It is cautious as it dents more easily than NORMAL. View detail
Fits: YAMAHA MT-25, YAMAHA MT-03
Easy to install! I also liked the sound quality!
YOSHIMURAR - 77S I worried about this product, but I chose this on the Cost side first, looks.
There is no particular problem in installation. However, considering the convenience of workability, it would be convenient to have Ratchet to handle Screw of Hexagonal Wrench Set and Exhaust System Socket section except for on-board tools.
Sound quality is satisfying, not too much trouble, the bass is emphasized and it feels good!
We used WRs pipe even in NINJA 2 Helmet 50R of the front vehicle, but this time it was also a correct answer purchased!
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3
Very satisfied
As I was coloring the R 25 Exhaust System, I was in SALE so I decided it. It's easy to install and it will not take less than an hour. Sound is reasonable Bass. Engine rotation speeds up faster than Normal muffler, a pleasant acceleration feeling. Also, it is light to feel the benefits of Exhaust System exchange. Because it weighs less than half of Normal muffler, you can realize that it is considerably lighter when walking by pushing the car body, falling asleep, raising. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
It looks nice..
Purchased at the same time as the company's Slip-on Silencer. Thanks to this, the connection point with Body's MainSilencer section is hidden & a sense of unity is apparent. Installation is 2 points Bolt stop. View detail
Using OEMfootpeg and COSPA
When installing, I attach Bracket so that it crosses Seat rail, but I can not afford it, and in Frame
Wound will come with absolutely. (Wound is not noticeable if the position is determined by one shot)
I thought it would be more like creating a structure that sandwiches even cushioning materials with more allowance. Also, if Cap bolt is Steel
Because of, rust etc. Be concerned. Because the distance between the tip cover and the footpeg's tip is small, you need a Side cover
When removing, you need to be careful not to add Wound.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03
I am very satisfied..
Completing the installation as soon as you are done. Titanium blue looks beautiful as well as appearance and I am satisfied with Large change.
Sound is finished in a comfortable feeling that the middle low-range is tightened.
I feel that rushing up has become Smooth compared with NORMAL.
The Heat Guard of the Option also has a sense of unity with Refreshing appearance.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Large I'm strange
Purchased with the same WR'S Short OvalTitanium Exhaust. It has a sense of unity with the Exhaust System and does not impair the appearance. I'm rather up. The installation process was also easier to install at a glance than to say the instructions.
View detail
It is attached to CB 400 SF spec 3
While choosing NORMAL's Silhouette, I chose WR'S Titanium Slip-on Silencer for a little more exhaust sound UP. Installation is easy, but it is better to prepare a new Gasket. Since I was not prepared, I reused the Gasket that was attached to NORMAL and installed it. We have not done exhaust leak for the moment. The installation itself is completed in about 10 minutes without the Gap of Bolt hole etc.
We have not made adjustments such as Setting for now, but I have noticed the Smooth on the problem from low rotation to high rotation.
About sound "Certified Product of JMCA" So moderate volume. The bass with Shi Bird at low rotation is comfortable and I am quite satisfied!
As we have just installed it, I hope that it will become even better sound quality in the future ^ ^
View detail
Totally good products
Simultaneous installation with the company's Rear Sets installation
STAND is easier to apply than OEM, and of course there is nothing to hinder Shift change
Well, in individual differences and Setting situations Length may not match, but in my Motorcycle there was no problem.
View detail
Large Satisfied sound !! When attaching to an old car, it may be attention?
I installed it in NC 42 of the 2008 model.
Gasketetc. Is it unnecessary? - - My Motorcycle was purchased in second hand. Just remove the Silencer part of Normal muffler - - It's very easy - - There is a great exhaust leak> <
When checking carefully, the cross section of NORMAL's Exhaust pipe is not round! When front Owner sinks into Right Side, it seems that the outside collapsed and exhaust leaked from there.
Tool there etc. I repaired it to appearance red dot, I applied the liquid center Gasket purchased and installed at Home center. Certainly Clearance is good, so if you are wearing it on a new car you may not need such hardship, but when you attach it to an old car you might be warned.
Impression after installation, the sound of heavy bass is very good !!
Exhaust System The change is a good sound of 100%.
It is also perfectly looking w
Whether there is no Inner baffle is Minus ~
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja250
Price is also cheap and Image changes.
The price is cheaper compared to others, and the image of the car body also changes gala. Sound is about the same volume as OEM but I was satisfied because I wanted to change appearance. I think that there is no change in terms of performance. It's Recommendation for people who just want to change their appearance. View detail
Fits: HONDA CBR400R, HONDA CB400F, HONDA 400X
It is attached to 400X!
It is attached to the 400X black. First of all I have a good sound. Often there were no genuine mufflers to notice the existence, but this muffler idling also began to echo bass and the sounds up to 5000 revs have never had good sounds. Although it will not be heard much by the engine sound when it gets high revolution, it will be unavoidable because it is a muffler that goes through the vehicle inspection. I think that there is a loss by buying it other than those who like quiet sounds to go through the vehicle inspection and make such a good sound. Installation is the same as ordinary muffler and there are no difficult points in particular. I do not have to bother exchanging the time of car inspection so please put it once (^^)
I bought a baked color and it is cool to 400 X BLACK, but if I think now, I wonder if ordinary Silver was okay (Yakiniko is slightly care for Large change) I think it's a good Exhaust System that also fits CBR 400R and CB 400 F ♪
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Simultaneous purchase with Exhaust System
W. I bought it at the same time with RS's Slip-on Silencer.
Without this it looks pretty bad.
However, care must be taken because it will contact the Exhaust System depending on the mounting position.
View detail
Perfect fit into my YZF R25. Simple installation. D.I.Y in less than 20 minutes. Recommended item for tidy up your bike's slip-on exhaust. Would recommend this item to others.
Perfect fit into my YZF R25. Simple installation. D.I.Y in less than 20 minutes. Recommended item for tidy up your bike's slip-on exhaust. Would recommend this item to others. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja250
Mounting on Z250.
I purchased Stainless Steel.
It is Simple Design's Exhaust System, but making is pretty beautiful and smart.
I can not feel the difference so much for the feeling I ran for Slip-on Silencer,
I feel that the acceleration from the start has become Smooth.
Regarding sound, it became considerably lower and thicker than OEM.
As I heard the sound of the Exhaust System while driving,
I feel like "I am on the Motorcycle!".
As the price is also Reasonable and reliable Brand, it is good to be able to purchase without worrying anything (Lol)
View detail
Rear Sets Because it is necessary for installation
NORMAL's Side Stand has an invisible shape that comes from ShiftChange lever is required for ensuring Clearance
Rigid feeling etc.. It seems no problem, but it was a blessing if it was a bit cheaper.
View detail
Fits: YAMAHA XJR400 S, YAMAHA XJR400 R, YAMAHA XJR400 R2
Satisfied!
We saw some relatively cheap and purchased WR'S Exhaust System as we were thinking too!
I really wanted full, but since Gold was unreasonable
To Slip-on Silencer ... f ^^;
I exchanged it from NORMAL, but it was surprisingly quiet when I tried it,
It is a good volume!
With low rotation, it seems that it got a little bigger than NORMAL, from high to medium speed
It sounds pretty good!
I personally like the unexpected condition of bass with Baffle!
It looks good Parenthesis I am very satisfied very much!
The price is also cheap, so the first person - Recommended for those who are planning to exchange from Normal muffler!
View detail