Reviews
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE
Sound Satisfaction
The OEM Exhaust System has only been installed for about 2000km, so I don't feel that the ride quality has changed, but I recommend it to those who want to get as large a sound as possible with the JMCA Exhaust System. View detail
Gentle heavy bass Sound.
[How is it used?
The ratio is 8 for city driving and 2 for short-distance touring.
Was the one you received as per Image?
It is a very high quality construction, as per Image, or rather beyond Image.
Was the installation difficult?
Exhaust System, so there are no particular difficulties.
How was your experience with it?
Compared to the JMCADown Type Exhaust System (Carbon silencer) that Mukawa has used until now, this time it is non-JMCA,
Carbon silencer is 40% longer than Mukawa's, but without inner baffle! The carbon silencer is 40% longer than that of Mukawa's, but without inner baffle!
I was thinking of returning to Mukawa again if it was too noisy because of the
There were no problems at all.
My MONKEY has 75ccBore up, High Camshaft, Big carburetor, but this OverExhaust System is
The sound is very bass-oriented, and there is no unwanted noise at all when idling or driving in normal conditions.
Bell. Well, when fully opened, the sound is quite loud. I think the intake noise is more loud because of the power filter.
It's like a lush.
As expected, the top of the fee ring extends without any stress, thanks to the Engine's spec.
Also, the looks. I really like the classy pushing-against-the-odds (lol) look.
[Was there anything that disappointed you?
None at all! Really good product. I was wondering if the price is right! I would say it's a very reasonable price!
View detail
OVERRear Sets
It's a z900rs2022 and I'm glad it came with no problems! View detail
Rugged Style is Upgrading??
Sub-frames are not included in the Frame Strength analysis chart published by Honda, and sub-frames have nothing to do with the improvement of vehicle body rigidity. The structure of the mounting points of this product also does not contribute to the improvement of vehicle body rigidity. However, the sub-frame does not contribute to the improvement of vehicle body rigidity due to the structure of the mounting points. Parenthesis. I am satisfied with the Large at It may have contributed slightly to the weight reduction of the car body.
Due to an error in the Instruction Manual, there was an excess or shortage of Bolts required for installation, but this was promptly addressed.
View detail
Improved overall riding experience
The entire logistics experience is very good. It takes less than 3 days from purchase to receipt of the goods, and there will be email and SMS reminders, and the location of the goods is also very clear.
As for the product is very easy to use, after installation, the overall riding experience will be improved, it will be more fighting and passionate, and the action of entering the corners is also different from the previous ones, and some corners can be bolder and more aggressive. -------------------------------------------------- -------- The entire logistics experience is very good. From the purchase to the receipt, it will be less than 3 days before and after, and it will be very email and SMS prompts. The location of the goods is Also very clear. As for the product is very easy to use, after installation, the overall ride experience is improved, and it will be more fighting and blood. The movement of the cornering now is different from the previous. Powered by Google Translator
View detail
Satisfied with the luxurious feel
Product Name
OVER Over Rear Sets 4 Position
Item Number
51-22-01
Vehicles
Grom ( JC61 ) 2015
Number of man-hours
About 2 hours
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I decided to buy this one because I wanted to try Sports driving and Circuit driving with Grom. I also chose this car because of the security of the brand "Over".
Was the one you received as per Image?
It was just like the Image. It is full of luxury.
Was the installation difficult?
You will need a M12/400mm rod. Net has instructions for assembly and an Instruction Manual in Quantity:The following is a set of instructions that should help you install it without any problems.
How was your experience with it?
This is great! You can choose from four different positions, so you have a lot of flexibility.
[Included Parts:were they on?
Instruction Manual and Seal are included.
[Was there anything that disappointed you?
The only place where the price is high. But if you see the real thing, you will be convinced.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Exhaust System for N-MAX155 installed on BirdCity155
The exhaust system made by SP Tadao was installed, but the quality was cheap and the sound was not different from the normal system.
Since there are not many options for an external exhaust system for the BirdCity155, we checked if an exhaust system for the N-MAX could be used for the BirdCity155 and found that it could be installed with Bolt On.
(1) Sound is larger than SP Tadao's, but not too loud Level (good sound)
(2) Smooth acceleration from low speed to high speed when running. (SP Tadao's exhaust feels muffled throughout the entire range.)
(3) Much better appearance. (Better texture)
(4) Not JMCA standard because of diversion to other car models (Installation is at your own risk.)
My personal overall assessment is that I am happy with the exchange.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
The tip is Perfect
The appearance is very nice! The sound is Japanese Vehicle Inspection Correspondence, so it's not large, but it's better than I expected.
Note, however, that those who have a NITRON or OHLINS Preload Adjuster installed on the Rear Suspension cannot install it unless they purchase a separate Over Transfer Plate.
I couldn't ride on the day I installed the Exhaust System because it wasn't written in the Webig….
Over's Site had it right.
Other than that, it's great!
View detail
I am Large satisfied with the power that exceeds my imagination before the replacement!
First of all, the sound quality is beyond my imagination!
The heavy bass exhaust sound is irresistible!
Acceleration seems to increase quickly from the middle.
The light weight of full titanium is also nice!
The price is not cheap, but I am very satisfied.
View detail
Highest quality material exhaust on offer
About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View detail
It is easy to install.
[How is it used?
I'm playing around in the prefecture.
Was the one you received as per Image?
Silencer and Pipe are beautiful as per Image
Was the installation difficult?
Other Exhaust System seems to be necessary to turn off Cowl.
I was able to remove Cowl and pimp it.
If I had to guess, I'd say it's a good idea to put a Silencer band on it.
It's like I'm out of touch.
How was your experience with it?
AfterFire when embracing? It becomes like a pan.
I am satisfied
[Included Parts:were they on?
There was no tool to hook Gasket and Spring.
Spring can get by with Radio pliers
Only Gasket was purchased separately.
[Was there anything that disappointed you?
Exhaust pipe Limit to Drain hose
Also, you have to think about the routing of the Oil tempSensor wire, or the wire will
It could melt.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 Pro
Light! Parenthesis is good!
The WheelSingle Body is extremely lightweight! That's all I can say.
The design is very good, and the custom feel is much improved and parenthesis becomes better.
I dared to choose TitaniumSilver anodized as it is also available in OEMStandard Spec. in Black and Gold, and it was the right choice.
View detail
It's a product that I'm satisfied with the riding position.
It's a satisfactory product among the rear sets. Exchange from genuine product to corresponding product and improve nigrip to maintain stable posture for riding. It also has a dress-up effect, so it's good to look at. If you are thinking about the rear set, I highly recommend it. View detail
ใส่ได้อย่างพอดีสวยงามมาก View detail
สินค้าตรงปก จัดส่งรวดเร็ว View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
สินค้าคุณภาพ จัดส่งและการแพคสินค้าดีมาก View detail
Rear Sets
I was worried about the high price, but I chose JAPAN to eliminate the anxiety about my feet.
Quantity for installation:Pair (for Left and Right) I thought about using a screw lock, but decided not to for now.
Photo shows Quantity with OEM:Pair (for Left and Right) Here's a comparison. 40mmBack.
View detail
As expected, Over!
Best
It would be better if the Gold amount was lower!
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
Overlaying sliders are the best
I bought it at a good price during the overlaying sale period.
Since the subframe was installed first, there is no major problem with installation.
Remove the existing spacer and install the slider and enclosed spacer in its place. Since the frame and sliders vary depending on the model year, check the model year before purchasing.
The beautiful color of silver and the sturdy structure and details are also overlaying. -------------------------------------------------- -------- I bought it at a good price for the overlacing sale period. Since the subframe was installed first, there is no problem with the installation. You can remove the spacer and install the spacer with a slider on the spot. The frame and slider vary depending on the year, so check the year when you buy and buy. The beautiful color of silver and the strong structure and details are also over-racing. Powered by Google Translator
View detail
Z125 Pro, for Rear Sets PENSKE BR125H
Rear Sets PENSKE BR125H are installed on a Kawasaki Z125 Pro.
Because the body color is black, the white color of the cap originally attached to Penske's Footpeg Bar End stands out. (My preference.) I was looking for something in Black that I could use and found this OVER cap and bought it.
exchange procedure
Remove the footpeg, insert the driver through the hole at the base of the footpeg, and tap it with a mallet to remove the cap. (It is quite hard.) 。
Place the footpeg on a flat surface, hammer in the Cap to be replaced, and you are done. We recommend tapping weakly until vertical positioning.
I replaced it and the Size was perfect (insert diameter:Diameter 16mm, Outer diameter of Cap.:25mm).
It took me quite a while to find this Cap, but it was worth the search.
I have used it for a year after replacing it with this Cap and have had no problems such as disconnection.
I am satisfied because I found out that it can be used as Repair Parts !!!!
View detail