Reviews
It's easy lol and looks perfect!
It is easy to fit.
The visual effect is perfect!
Cost performance is honestly bad but it looks better so I'm ok with it lol.
View detail
It's expensive but you won't regret buying it! 100% satisfaction!
I had a hard time peeling the gasket off, but other than that, it went on very easily. I am very satisfied with this purchase. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE
5 points for sound +6, ease of installation -1
I searched for Japan Government Certificated, Short, and Megaphone Type and found no options, so I bought it.
Installation
In addition to Rear Stand + In-vehicle Jack, Glasses, plate latche, and other naturally necessary items are used as appropriate.
I am not good at removing Gasket.
Instruction manual is normal, only the exhaust pipe is hard to fit in the middle, and there is no description of the procedure of Cowl removal and installation, or Torque tightening.
Silencer Bracket is to be attached to the LINK of the rear suspension, but it would be better to have an on-board Jack for the car.
And Silencer, even with 4 layers of Washer, it hits the DrumstickDrumstick on the Swing Arm! (Image is that) 。
I ended up with a 10mm collar and a single Washer to float 0.5mm. (No image) 。
The supplied M8 bolt is not long enough, so a handheld cap bolt is used.
About Sound
Idling…The bass sound is at a level that makes me wonder if it is Japan Government Certificated. In the middle of a residential area, it is likely to be reported.
I use only 4000~6000 rpm for city driving… I use only 4000~6000 rpm for fuel efficiency, but the bass is nice when I start driving.
Winding…I'm satisfied with the Race ish sound of the Engine from around 6000 RPM, so I don't pay that much attention to the Exhaust SystemSound.
It is not too expensive for a full exhaust system, and it is worth buying rather than being stuck with an unfamiliar foreign-made product. In fact, the Idling sound was bigger than expected, but I have no regrets.
View detail
Well, yeah.
I don't like that the Bolt on the Front side can have a little gap.
It is recommended that two Jacks be used so that the Engine does not Gap.
I don't like the point where the Bolt paint peels off with Wrench when tightening.
View detail
It's still Over.
[How is it used?
Rear Sets were introduced because the Normal step hits the calf when the foot is lowered and makes it difficult to get a good footing.
Was the one you received as per Image?
As per Image, Over's products have a good texture.
Was the installation difficult?
Installed with reference to the Installation Manual and YouTube. The troublesome Brake Side was installed without any problems.
I felt the shift rod was a little short.
How was your experience with it?
No more calf hitting the ground when lowering the foot. The rigidity while driving has also increased.
However, it is not Foldable, so when I was taking my foot off the footpeg at low speeds, my toe caught and I suffered a LargeDamage to my calf. Be careful. ←Just my own fault....
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Over Sprocket Cover
I love it because it comes with Design and Change Accent.
I think it is less expensive than other Manufacturers
View detail
be quick to react
Quality and texture information Cool with aluminum cutting be quick to react to the feeling of use to find fun in driving An impact No. 1903-N is required by holding the ANEX screw for installation. There is no instrument panel screw groove Cost performance and comparison with other products are said to be expensive, but it is worth it Delivery and packaging to WeBike in a week The packaging is great A caveat is that the seat position changes. You have to know that and buy it View detail
it's the best
Anyway, it is beautifully made.
I have not yet been able to run the machine on my own, but it is clear that the Rear movement is better than that of the Normal Swing Arm.
We replaced the standard KITACO rear shocks with KITACO×GEARS rear shocks, so we think this may also have an effect.
View detail
Rear Sets for monkey125
Easy to use, cool, easy to install, good response from the manufacturer. View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
Accuracy!
The cutting accuracy of the parts is high, and bolt tightening is also excellent.
The Driven Sprocket of the GROM has little clearance with other parts, so it is necessary to work carefully so that the wounds do not stick to both the body and the parts.
Although we have not yet been able to verify the shift feel, we have seen an improvement in the firmness of the feel.
View detail
It can be replaced directly from the OEMfootpeg and is pretty Race ish.
It was installed on a 20 year old MODEL with OEMQS.
I was looking for a replacement from a completely OEM condition that could be installed without replacing the brake hose, etc. as much as possible, and I saw this one and decided to purchase it.
I was able to use the OEM rear brake master as described in the product description, and the OEM QS was installed as is and worked fine.
In addition, while other road-use Rear Sets have less change in position than the Circuit Rear Sets, this one can change the position to be larger than those Rear Sets, which is good for creating a more aggressive stance.
In addition, this product has a kit that allows reverse shifting as an option, and it seems that no modification is required on the cowl side. This is also an advantage of this product over other products in terms of large size.
The quality is also quite good. Regardless of whether QS is installed or not, the length adjustment of the shift rod can be troublesome for this MODEL, but it was good that it was designed to be easy to adjust.
I am generally satisfied with the product, but the current Brake switch seems to be too short for the OEM cable length, so I could not attach it to the Switch Holder.
Therefore, we plan to find a separate Bracket for Offset in Home center to support this.
However, it is possible that this is a problem with my car body or I am doing it wrong.
I also feel that it is a little more expensive than other products, and I would be happy if it were a little cheaper, since the total price for the Reverse ShiftSpec. is about 80,000 yen.
View detail
Fits: SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT
Can also be installed on the GSX-S1000GX.
[How is it used?
It was installed to minimize damage when standing up.
It's a component I don't really want to be a part of.
Was the one you received as per Image?
It was exactly as shown in the image. I had previously installed a Frame direct mount on a different model car, but this time I chose the Plate type because the bolt might bend in the event of a fall.
Was the installation difficult?
I asked Shop to help me with the possibility of the Engine falling off during installation.
How was your experience with it?
I like it because it is not that noticeable.
[Included Parts:were they on?
InstallationInstruction Manual was kindly provided.
[Was there anything that disappointed you?
None
Point and hang of installation
It would be possible for an individual to install it if there is a Jacketc. just in case. It may be a good idea to install one side at a time.
[Opinions and requests to Manufacturer
It seems that all GSX-S1000Series can be installed, so I hope you can add compatible models.
View detail
OVER OVER OVER RACING-DOWN Custom
I am satisfied with the Large Change and finally purchased the OVER RACING Exhaust System that I have wanted for a long time. The quality of the product is excellent. The sound quality is also excellent! View detail
One more step is missing.
The texture and design are great.
Black Anodized is also available and it is nice to have a choice of colors.
However, as is the case with other products here, the price is not quite right.
The placement of the bracket is such that it is only designed to be used in combination with the Normal parts, and the bracket is located in a position where it will not look good after installation.
In this case, the Cable that attaches to the Left footpeg Bracket is sticking out and looks ugly.
If you push it inward with a little force, it will not go in, but I am concerned that it may be subjected to excessive force.
I think there are ways to do this, such as extending the Bracket a bit further inward or at an angle.
View detail
Feels like new.
The work went Smoothly than I expected. The color had almost faded and I feel brand new. View detail
Does not fit Hunter Cub J65 vehicle...
I really like the quality and finish of the product...
It doesn't fit my hunter curve.
I searched and purchased it, but this was the first time I realized that there were separate markings of 55 and 65 in the model name.
Perhaps it was for domestic use or for export, but it did not fit the Korean stand.
That's too bad. -------------------------------------------------- -------- I really like the quality and finish of the product ... It doesn't fit my hunter curve I searched and purchased, but I first learned whether there were 55 and 65 notations in the model name. It was not suitable for the Korean stand, whether the domestic export was wrong. That's too bad. Powered by Google Translator
View detail
Rear Sets for monkey125
This is my first OverRACING product and the design is very good and easy to use. Installation was easy. View detail
It would be nice if it came with it from the beginning.
I saw it on impressions and bought it.
It's better to have it attached, isn't it?
I just need to install it. Is it an individual difference?
Mine was really tight.
I was lucky to get one of them in, but the other one wouldn't go in.
In the end, I had to sharpen the tip a little with a file and put it in.
I guess it would be cooler if it was attached.
By the way, this is the price for 1 pc.
View detail
I like it so much
First of all, the delivery is very fast
Product condition, packaging condition, finish, etc.
I like it so much
And the manual was also well packaged.
I wish you all the best in the future...
...
...
...
...
...
...
...
...
...
...
...
...
...------------------------------------------------------------- ----------- First of all, delivery is quietly fast Products, packaging status, finish, etc. I like it so much And the manual has also been well packed Thank you for your future ... Of Of Of Of Of Of Of Of Of Of Of Of Of Of Of Of Powered by Google Translator
View detail
forcibly
The end cap that came with No Brand's Rear Sets flew away, so I immediately bought the OverRACING cap when I saw it. The product is well made and a good product.
Of course, the Body is not OverRACING, so it needs to be processed.
View detail