Reviews
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Purchased for CB 1000 and VTR 250
S of CB 1000 SF. T. Purchase this Grip so DGrip is GETTA. Also purchased simultaneously for VTR 250. As long as you are familiar with the exchange, you can wear it without problems. Regarding CB 1000 SF, both grips are about 5 mm shorter as shown in the attached picture. The feeling attached was thicker than the OEM more than the OEM but the feel is nice. Afterwards it is a verification of durability to confirm operational feeling and fatigue feeling at Touring. If there is a problem with a short Grip, at that time Spaceretc. We plan to remodel. Although it is not attached to the VTR 250, since there is no problem with Length, I am going to judge the attachment after the test at CB. View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Performance over price
Until now I have used POCHCF's RACING Grip Pink, but the dirt has become prominent much more.
ALCAN hands grip is what I got in looking for various things. After purchasing 3 Set Quantity : It was affordable with 389 yen per set. I think that the use feeling likes Rubber quality too hard.
【What made you decide the purchase?】 Affordable price.
【How was it actually used?】 You can use it without slipping.
【Was it difficult to install? (Hard parts case)】 It is a Universal Product, but with OEM etc.. is.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Let's clean the Handlebar before applying the adhesive. There is also a groove of Wire lock, so I think that you can use it as necessary.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please tell me if there are any improvement points】 It's a good feeling.
【Have you compared items?】 Pro grip
[Others] Authority
View detail
very good
The other previously purchased LED blinker of another company has gone out in about one year and one out of four (4 out of 16) For.
Buy this item of the same form this time
Length is a bit short, but we are satisfied because construction and brightness are better than previous ones.
So, how long this LED Blinker will last,
I expect it..
View detail
I am very satisfied !!
Color of the car is Black and this time I purchased Gold items
The presence is up..
Very Parenthesis I got better.
However, Minus is a bit expensive.
View detail
A suitable commodity
Although I am installing from now on, when opening the package and checking the product while exciting, the knock pin at the fulcrum part of the handle clamp is the opposite, it was feeling, it was a disappointing item. Impression that it is not considered what to become after installation. When the bolt face of the clamp is aligned with the same face, the driving face of the knock pin does not become a contrast to the left and right. Well, there is no problem in the function, but I wonder if it is nothing but sticking to the appearance. Also, this, the end portion of the bar, the part to be tightened by the bolt is too small and it seems to be a gap even if you tighten it. It is disappointing for the price made in overseas feeling. I can not make a picture for some reason! I want to show it View detail
It might be better not to buy nervous people.
I tried to exchange the Bar End of GSX-R from NORMAL and purchased it.
From the results, GSX-R did not know the feeling of use etc. since it could not be attached unless the convexity in the Throttle bar part had been processed.
I think whether it will be quite heavy Bar End, etc. if it says that you know the feeling of use at the Bar End exchange.
For texture, I think that the color of the item is Beauty,
There was a Wound in some places and there was also a small dent, so I can not recommend buying a nervous person.
I think whether it is useless if we consider the price side,
If you think of a little fashion it would be nice to do Imechen with goods with this price.
View detail
Cool!
I installed it in BOLT Shoulder Bag.
Since there was no real thing in any store, I did not know the texture and the actual dimensions, so I thought that it was a bit long if I saw what I received, but I am satisfied with my coolness!
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
ALCAN hands Grip Φ22 iGrip
About 3 years, I used it for a distance of 25,000 kilometers and it was about time so I bought Downs so I bought it again.
I used to use Pro grip before, but it is too soft to change for myself and change to eye grip.
It is a Repeater since it got easier to grasp with my favorite place where the outer diameter is slightly stiff and the outer diameter is Large.
View detail
Fits: YAMAHA SR400, YAMAHA SR400 88-00 Barnett Accelerator Holder, YAMAHA SR400 88-00 Barnett Accelerator Holder
Buy with Barnett type accelerator holder for simultaneous exchange
It is not less than OEM Product's fabrication quality, and there is only a model exclusively for the car type and the Wire mounting part was satisfied with Large in that it was shaped like an angle like the OEM Product.
Length can be chosen from abundant Lineup, so it is also wonderful to be able to choose the one suitable for the vehicle!
Regarding durability, I think that Large big individual differences will come out due to frequency of use etc, so I will periodically carry out WireMaintenance and I will continue to pull my car so that it will last as long as possible.
Since we are considering exchanging all types of Wire to Mesh TypeWire in the future, I would like you to add a Mesh Type to this Barnett type Wire Lineup.
View detail
ALCAN handsALCAN hands Bar End CAVE
ALCAN hands ALCAN hands Bar End CAVE quotient ProductNo : F70001A F70001B F70001C F70001D F70001E F70001F F70001G F70001H
I installed it in GORILLA, I am satisfied with firmly making the price versus effect well.
View detail
I installed it in MAJESTYS!
I bought it because Shop did not have Red and Wae Big was cheaper.
However, if you install it as it is, as you say there is rattling at the time of traveling, Smartphone Holder also moves, so you can not concentrate on driving.
6 x 13 mm Meter thickness at home center 2. 0 millimeter Meter's RubberWasherQuantity : 1 Set of 4pcs. I bought it and solved it, it was solved!
I like it very much..
View detail
Looks like
Although it looks satisfactory
The end part is firmly in, but it gets a little bit.
It seems that even if I try to enter more, I firmly get in to the end
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Attached to cb 400 sb
Compared with OEM, the diameter is large and it gets easier to grip. Feelingly, it is tough but firm feeling. One star deduction is that where the Axel side's Length is insufficient and a little gap is left. If I wrote it at the beginning, I could prepare a spacer, but after attaching it, the adhesive gets peeled off and it will be redone, so there's a shame.
But, it looks better, and the Accelerator operation got light, so I suppose it was OK.
View detail
Price is higher than OEM
OEMCable of WR 250 R is less than 4000 yen at 5% discount, and this product is 5000 yen.
The difference is the thickness of Cable. This one is 1 Size thick.
Fat barClamp etc. Since it installed, OEM used this product because the Length was insufficient, but this product collapsed the other day and surroundings collided Throttle Resin part inside the throttle (Where it turned to L-Type) Because it was unavoidably broken and replaced.
Because it is the Other Company Product, we would like at least to make it cheaper than OEM. OEM is higher quality such as Waterproof structure of Adjuster.
Inside Axel, the internal wire rubs and feels gorgori, but it may get worn out as you use it.
I purchased it without the choice of Long wire, but I think that if you purchase other things you will buy that one.
View detail
In 1100 KATANA this is the only option other than OEM
OEMWire in Normal cab
There are only two choices of ALCAN hands.
Although the price stretches slightly,
Wire moves to Smooth more than OEM
It is smooth..
Moreover, it is domestically produced.
I was kept waiting for BackOrder for a while
There is only a thing suitable for the price.
View detail
This Manufacturer is white
After using Grip of ALCAN hands, it became interested in the thing of the same Manufacturer and purchased this.
Although it is a casual fashion, there is no way for performance to complain.
The indentation of the part where the finger is caught is JUST and the finger in the state without attachment Quantity : It is easier to do when attaching than 2pc brackle so it is easier for Brake and Shift change.
Although it is Small Parts, it is a dish that seems to have a tremendous Large thing in its Small Suspension.
But, if you compare the operability
Inevitable in thick Winter Gloves .... Well it seems that way.
View detail
To prevent High flasher!
With purchase of LED Blinker of GLADIUS 650400, I bought this product.
I think that there are various ways to prevent High flasher by LEDization, but I think that it is the easiest to put a Register in the middle.
I connect LED Blinker and Register, but I used Space unexpectedly. Also we need a place for Body.
Although Cable is divided into two branches, I am worried a little whether I will cut off when a heavy load such as pull is applied.
There is no problem in function.
View detail
I made it to LED Blinker!
We installed LED Blinker on GLADIUS 650400.
Length is almost the same as OEM, but the depth is short and it became very impressive Sharp.
The coloring is also very bright, beautiful and good feeling.
There is no rain invasion at the moment, and it is generally a satisfactory item.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
It's a price ... ....!?!?!?
Previously, I used the product of Pro grip
Purchased here this time because it was so intense that it was too soft, too soft.
Outer box etc is simple and it is simple.
Although it is about mounting, there is no need to insert it, for example.
Although it is about hardness etc., is it a rather hard kind of class.
If it is a close expression, such as Ballpen "Doctor Grip" I made it hard ... that kind of place.
Initially "Hmm…" Although I thought, when running it is hard to grasp thanks to its hard to slip. And you do not have to put your strength to change.
I thought that it would cost me, but I was betrayed in a good way.
View detail
I was able to install it without trouble to CB 400 SF.
Before installing this product, there was Made by HURRICANE 's SS Size and I attempted to fit it, but the Clamp part struck the Brake master and it was only possible to mount it obliquely.
We also saw information that if you are watching Brace's information on Net, you can not install it straight even with products from other companies.
However, since Brace made by ALCAN hands has Hinge as one part of Clamp part, it does not take too much space and the Brace bar itself also adjusts the length, so it can extend to Length of Limit that does not interfere.
The thickness of the bar is also 22. Installation of Attachment is easy with 2 Φ.
It is a complaint-free product!
View detail