Reviews
Great
It took hours to remove Air from Brake so far, but using Syringe I put Oil from Breed of Caliper and hydraulic pressure started to take about 5 minutes of thing.
It is not disposable and I think that I did a very nice shopping when I thought that I could save useless time like that nightmare at BrakeMaintenance.
View detail
Easy to use
I used cheap products of Manufacturer unknown, but because it was hard to use, I replaced it with ETHOS.
good point
Since the rigidity is solid, even if the car body is shaken, it does not go guyagguha.
The thickness of Pipe of the handle part exactly grasps exactly and it is easy to put in force.
The movement of Caster is good and it is easy to get in under the car body. * If it is cheap, it will not move if the weight hangs on the Caster, or it needs considerable power.
The price is just right..
A bad point
Because the handle part is long, it is easy to put power, but Space is also required for that
View detail
There is no reason to choose anything else
Like Gloves, it is a classic Items of old TRIAL.
It is hard to get tired and it's hard to slip. Compared to other grips, it is hard to slip even if it gets dirty with mud.
The price was affordable, I tried Domino or Renthal in the past, but eventually I bought only this.
View detail
13 valuable for NSR 250 R
I bought 13 valuables for precious NSR 250 R.
It is necessary for Gymkhana and ShortCircuit, but it is not handled by SUNSTAR or ZAM.
There is also a molded hole in the shape, it is light weighted and it is easy to organize by the difference with Cool other Sprocket.
Because I do not know durability between ☆ Three
View detail
With Affordable Size
Purchase for Grom without Center Stand.
Thanks to a simple structure and a quadruple Caster with Bearing, it lifts with a light force.
View detail
Why did not you buy it soon!
Purchased like Hara 2.
Until now, I used Side Stand and stayed on the wall
Let me hang it and remove Rear tire
I wish I could buy it sooner.
Large type has for Hook bolt, but it does not match
So it was impossible.
I use mind more than HookBolt type,
If Hara 2, the car body is also light, there is no problem even for one person.
To do.
Pretty Maintenance has become easier.
In addition to tackle Front and Rear suspension
Is it Jack?
View detail
Ideal for Maintenance
I think that I did a good shopping.. Cost performance is also good, even though Side Stand has no problem, I use this easily and are using it for Maintenance and Custom easily. View detail
I am satisfied..
It is easy to use as usual. It looks pretty good too. The Rubber of the Mount part is also thick and relieved.
Pipe diameter is also large and secure. I do not feel dissatisfied, but I wish it was a bit cheaper ...
View detail
It can not be used for GSX 1100S
It is explained that it corresponds to most Motorcycle, but it was not usable for GSX 1100S. Because the position of the vehicle's Stem hole is high, Front tire will not float even if the STAND is the longest.
I am using only genuine to keep the state as it is after the Tire is removed, without ginger, Tire is floated to remove Tire using Jack.
We need a little more polite explanation.
View detail
Firm making
When I lost color of Front stand and I was at a loss, I found out the existence of this item and purchased.
Can be used without problems, quality is better than the original one. Lineup of such Parts is appreciated.
View detail
There is no choice because there is only this!
While thanking you for making it exclusively for DREAM 50, some points.
I am using it when exchanging Oil or Maintenance of Chain, but I need a little courage and hang to be able to ride alone.
After that, according to other people 's Review, Spolcket' s Bolt interfered quickly, Plating half Pipe (Protective Pipe?) It is easy to peel off.
But I am thankful that you have sold it with exclusive items after all.
View detail
Hang may be there
I feel a little unstable when I raise it compared to receiving L-Type.
It will stabilize once it goes up,
If you do not plug straight in to the car body
It may be dangerous.
Texture etc etc. Is very nice.
View detail
Convenient if there is one. And it can be used for a long time
CBR600RR (Racer) & CLEVERWOLF made Cowl
I am using it in the above-mentioned vehicle.
It is essential item for using Tire warmer in Circuit.
Rear also unified with STAND of Ethos Design. Plating is beautiful!
Because of the Cowl shape, the Upper Cowl lower part was slightly interfered.
Personally I do not mind Level.
Compared to J - trip like STAND,
Self-reliance is solid when folding without using it. (It can not open and fall)
I think I am a Good Point!
View detail
Easy to use!
J-Trip etc was also a candidate, but I liked Chromium Plating and liked Ethos Design's items so select this.
It can not be used within my narrow Transporter because of Long Type, but it is very easy to use other than that.
It is cool to use together with Front stand of the same color!
View detail
For light weight
When we diverted it to heavy-duty cars by other manufacturer's FSTAND, Adapter bent.
Up to 400? Class may be the usage limit. (Adapter diameter : 13mm)
So, let's avoid diversion. Let's keep using FSTAND of Body's Ethos to a light vehicle.
View detail
Easy to grasp, but there is also Demerit
I have favorite mont-bell Touring Gloves, but I bought it for trial because the price is cheap. As stated by the product information, it is easy to grasp easily. The operability is outstanding with the feeling that it is grasping with bare hands. As you can see, the Protection person can not be expected, but I think that there is no problem if it is used for Touring.
As Demerit, it is made to "Fit in the grasped state", so it is difficult to open the hand in reverse. Because it is based on two-finger operation, the forefinger and middle finger move freely, but the other fingers always grips. There is resistance when trying to open. So, it is difficult to open the hand while driving and Stretch or operate with three fingers.
It depends on ease of operation, otherwise it may be difficult to use.
View detail
Best product
I'm using Color type, build is same.
Small Space. (It can be lifted by hand with one hand support)
Thanks to Caster I can move and I can cut Handlebar.
Quantity : Pair (for Left and Right) Because Arm has high degree of freedom of direction, positioning is also easier.
View detail
Ethos nostalgic
About 30 years ago, I purchased Ethos' Exhaust Chamber on NSR 250, I purchased it, I purchased it, because it is for TRIAL it is short but it is easy to use.
I think Gloves is familiar and durable towards hands
Until now,
Cheap and cool Mesh Gloves in other Manufacturer soon opened a hole.
View detail
From 91NSR 250 for VTR 250
As I was in front of the picture I modified the STANDArm like the 91 NSR 250 and used it for the VTR 250, but because the stability is lacking as well, the work efficiency was bad. Stability is good after buying and maintaining the STANDArm of STD Type. View detail
Easy Dress-up
I installed it in the edge of Tank.
I was able to do Dress-up easily with just work pushed into the gap.
Even if it is peeled from now, I think that this price is appropriate.
View detail