Reviews
strong
The construction is solid and easy to use.
Most car models will probably go up with this.
Storage space is required, so if you have an available Space, it is useful to have it.
View detail
strong
I bought this for emergency use to go on forest roads.
I feel that the mouth Packing deteriorates quickly over time.
You may want to have the Material changed a bit more. I changed it myself.
I like that it's sturdy, but...
It is slightly heavy and may need to be carried with care.
View detail
Ethos, why?
I purchased this product because it can be used with the WheelClamp made by the same company, but the axle of the front stand interferes with the clamp and it cannot be used together.
However, the front stand itself can be used without any problem.
View detail
I think it looks sturdy and has good cost performance.
The pipe is thicker than I expected from the picture, and it looks sturdy enough that I don't feel uneasy at all when I straddle Seat while lifting it with this.
I'm thinking of buying another set for one vehicle or so, since all I have are motorcycles that don't have center stands.
View detail
Large Size!
I have large hands, and there were no products that fit my size, so this was very helpful. I would like to buy more from you in the future. View detail
Maintenance
It is used for Maintenance of Front.
The Pipe looks strong and looks good, but it will rust with long term use.
It would be better to maintain it so that it doesn't rust.
The price is a bit steep, though.
View detail
Plating rusts too if left outside for more than 10 years lol.
I bought it when I used to ride NSR and it was abandoned 10 years ago. View detail
Easy to air out.
This is a syringe for air bleeding which is indispensable for overhaul and maintenance of hydraulic brake and hydraulic clutch. It is very efficient because it can release the air in a short time. View detail
Useful Syringe
[How is it used?
I bought this for Brake fluid. The purpose is to remove the fluid in the master cup.
I keep it in my Tool Box (not the same as a tool box).
How was your experience with it?
It comes with a Hose and is ready to use. It's well made and this one is all I need!
How did it compare to other products?
I used to wipe it off with Dustcloth, which was inefficient, but if you use it 100 times, it should be more economical than Dustcloth...! LOL!
[Points to note]
After you are done using it, flush it with water and let it dry.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard
APE 100
I used it on my APE 100.
Quantity:I'm glad I didn't have to buy more than one set.
Tie Wrap allows you to place it where you want it
We installed it in Engine MountLeft.
View detail
Enough for the Sunday mechanic.
I bought this to use on my TZr50R Brake master Overhaul.
The deciding factor in the purchase
I was not sure if it was a three-pronged type. I bought this type because I was worried that the C-ring of TZr50R's front side brake master might not be able to be removed.
I also chose this replacement Type because it was cheap and I had used other products from Ethos Design, so I could be assured of its accuracy. (The other ones are the same color and shape, so I have a feeling it's OEM from somewhere else.)
[Impressions of using it]
First of all, I was able to take the C-ring successfully.
The tip was solid and there was no C-ring flying off in the process.
However, as mentioned above, the C-ring is quite deep, and as it was, it interfered exquisitely and could not be grasped, so I was able to use it by shaving a little.
I haven't used it on the for Shaft C-ring, but I think I can use it there without any problem.
I would like to see some improvements.
It becomes a personal thing, but because I was able to work smoothly if it was made small even if it was 0.5mm more overall, I felt that it was even better if it became Small Type.
Also, I would have appreciated a bag or Case for storage as I had nothing to put it in after the work was done and my nails would have been RoseRose.
Products compared
I compared this product with KTC's and SIGNET's Pliers. I decided to buy this product because of the function, price, brand, delivery time, etc.
When I was writing this impression, I noticed that KITACO and Professional tools are also offering the same thing, so I think it is good to compare them according to the stock status and price.
【Review】
I think it is a good product because it is easy to use, low price and can be used both for Shaft and for Hole.
I thought it would be good to compare the delivery time and the price because the same product comes out from each Manufacturer.
View detail
Ethos Design Air Venting Syringe
I used it for Brake fluid, I don't know about Gasoline because I didn't use it. Hose outer diameter is 7mm, inner diameter is 4mm, and it's rubber, so it's stretchable. View detail
Good shopping was made
I love how easy it is to use. I wish I had purchased this product when I did as I expected it would be very useful, I would hate to think what I would have done without the Syringe. 、、、、
It's a great product to have.
View detail
ETHOS Ethos Design Air Venting Syringe
I used it for Brake fluid, I don't know about Gasoline because I didn't use it. Hose outer diameter is 7mm, inner diameter is 4mm, and it's rubber, so it's stretchable. View detail
ETHOS Ethos Design:A43050
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is very easy to replace the fluid because it is easy to suck out the air and fluid from the Caliper side. It's a great product, but I wish it had a little bit of Hose.
View detail
ETHOS Ethos Design Air Venting Syringe
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is very easy to replace the fluid because it is easy to suck out the air and fluid from the Caliper side. It's a great product, but I wish it had a little bit of Hose.
View detail
Ethos Design Air Venting Syringe
I used it for Brake fluid, I don't know about Gasoline because I didn't use it. Hose outer diameter is 7mm, inner diameter is 4mm, and it's rubber, so it's stretchable. View detail
ETHOS Ethos Design Air Venting Syringe
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is very easy to replace the fluid because it is easy to suck out the air and fluid from the Caliper side. It's a great product, but I wish it had a little bit of Hose.
View detail
For Grom
Overall, it was a good purchase.
I thought it was easy to remove the body from the STAND by stepping on the hook attached to the saucer.
I think a Large Motorcycle would be more impressive.
Unfortunately, when working on a painted floor, the STAND weight is too light and it slides forward. (Probably because it's a round Pipe?) Mortar flooring will be large and durable.
It is the strongest when it is used with Rear stand. I think that it is enough to be able to think that it is Large strong at all even if an earthquake comes though it is an excuse.
View detail
Air Venting Syringe
If Fluid is injected from the Caliper side, Air in the Hose rises with Fluid, and air release can be performed quickly. It is a pity that the hose is short. View detail