Reviews
Fits: HUSQVARNA TE250, HUSQVARNA TC250, KTM 250SX, HUSQVARNA TE300
I was worried it was OEM!
The OEM Under Guard was not able to guard the Rear shock LINK, so I was looking for something that could protect the LINK as well, so I bought this one!
Material same as OEM:It's Plastic, so it may be a comfort, but I'm happy enough with it!
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 250F, YAMAHA WR 450F
Repair Parts is also available.
The structure is simple, and I think there is no large difference in function and life compared with the thing of ZETA. (ZETA products are also being used in other cars)
The WearPad's arrival was erratic, and the ZETA was no different.
It is good if you check it frequently, but it takes time to procure in Troubleetc. (More than a few weeks) In some cases, it is recommended to purchase Repair Parts as well.
WearPad is a common part for other models, so I think it can be used for other models.
View detail
The SEROW225 W has
It was different from the picture. The upper part was not squeezed and the thing arrived.
I made the mistake of choosing it based on the video. I should have read the description carefully.
It's cheap and things look good, but it was short for ??????SEROW225 W.
View detail
Fits: GASGAS MC450F, GASGAS MC250F, GASGAS MC125
erroneous product
This is the part number for the Exterior Kit for the Gasgas MC, but only the Rear Fender arrived for the EC.
If it's for MC, there should be no protrusion for tail lamp installation, but the one I received is the shape for EC with protrusion for tail lamp installation.
The air cleaner box for EC has a hole for penetrating, and the hole must be blocked to use it without the tail lamp.
I can't return it because I stuck Decal on it right after arrival. I'm reviewing it to alert other buyers.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 250F, YAMAHA WR 450F
I'm not sure it's functional.
Protection is no problem. 。 It's a two-piece structure, and I like it because it's simpler than other manufacturers' products.
There is no damage that becomes impossible to run even if it hits, and I think that it is difficult to give stress to the attachment part of the Swing Arm.
However, the decrease is early! I think that it is too early even if Repair Parts comes out however.
It is a pity that it seems to take longer than expected when it is also out of stock.
View detail
Fits: HUSQVARNA TC 250, HUSQVARNA TE 250, HUSQVARNA TE 300
Easy to install and easy to use?
Installation is super easy and even a maintenance beginner can install it right away. 。 Just installing it doubles the sense of security ^_^. View detail
Fits: HUSQVARNA TE250, HUSQVARNA TE125, HUSQVARNA TC125, HUSQVARNA FE450, HUSQVARNA FE350, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350, HUSQVARNA FC250
The textures are perfect!
It wasn't included in the EnduroKit91023 picture, so I bought it along with it. However, it was actually in the EnduroKit, so I ended up buying two of the same thing. I'll use it someday because it's too much trouble to return it. View detail
Cospa strongest
[How is it used?
Used for Motorcycle for Enduro.
I used to use ZETA's SIDEMount Kit and Aluminum Handguard for the best Spec. I used to do that, but I lost the flex of the handlebar, and it caused my arm to rise up, and it was too heavy and tiring, so I use the light and flexy hand guard of All plastic.
Was the one you received as per Image?
Just like the image. The finish is a bit messy and the bolts are small. That's what I think.
Was the installation difficult?
Even a monkey can do it.
How was your experience with it?
It doesn't get damaged even if you throw it around quite a bit.
There is quite a bit of flexibility in Plastic.
[Included Parts:were they on?
Mount only.
[Was there anything that disappointed you?
For the price, I don't think you'll be disappointed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Cannot be installed on Fat bar.
View detail
High cost performance.
I think there is another frame protector made by ACERBIS, but you can buy one made by Poly sports for about half the price.
I have used the ACERBIS frame protector on other models, but the difference is that the heel is made of a different material.:It is available with or without Plastic Guard.
I think the ACERBIS Protector has a slightly better heel grip than the ACERBIS Protector because of this.
However, I felt that it was the difference of the degree that I did not mind. I don't think there is any particular thing that becomes slippery when this Protector is installed.
The overall shape and the method of inserting BoltAnchor into Swing arm pivot and fixing it to Frame by Tie Band are almost same.
I think the strength and durability of the whole Protector is almost the same etc.
The protection is good, and the OffBoots are mostly protected from scrapes, falls and stepping stones.
The product comes with all the (presumably weatherproof) Tie Bands, Anchor bolts, etc. for installation and is ready to install.
There are many cases that Poly sports plastic parts are not well made and the screw holes do not fit, but this part is not something that you have to adjust, so it was not particularly difficult to install.
I think the Brake pedal needs to be removed.
By the way, the ACERBIS Protector has a Rubber Damper on the back of the Frame to prevent the Guard from rubbing against the Frame, but after long term use, the Damper left a very strong contact mark on the Frame.
Based on this experience, I put Universal's Protection sheet on the Frame in advance of installation to protect it.
It's not a place for rust, so thin adhesive Sponge tape is fine, but I think anything too thick will interfere with the installation.
To be honest, I was not sure about purchasing the ACERBIS product which is twice the price, but at this price, I would definitely recommend installing it for when you resale.
View detail
Fits: YAMAHA YZ 125, YAMAHA YZ 250, YAMAHA YZ 450F, YAMAHA YZ 250F, YAMAHA YZ 250FX
Cost-effective
I bought it to remove the Headlight when attending Events because it was inexpensive.
The cosmetics are quite good and are great for Custom and diversions.
Comparison products
I chose this product because I liked the shape.
https://www.webike.net/sd/24170982/
View detail
Fits: YAMAHA WR 250F, YAMAHA WR 450F, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA YZ 450F
The only choice for Swing Arm protection.
I think this is the only one made by Poly sports that currently protects the Swing Arm.
To install, hook the claws on the body and secure with the Tie Band.
I try to keep the ties as close to the inside or bottom as possible so that they don't break off in the event of a fall, and so that they don't accumulate muddy water. Be careful not to touch the Swing Arm or Chain in some places. It's a long piece, so if it comes off when driving, it's going to be hard to carry.
I haven't used it very hard, but I've used it for about 5 years.
There is a SmallWound on the surface, but there is no large crack or deformation.
I think it is Level that Off car driver doesn't mind, but it might be good to put Sponge tape between Swing Arm and Guard. By the way, I bought the same product for another car model recently, and it came with Sponge tape.
I haven't driven the car on hard muddy roads, but there is no mud left between the Swing Arm and the Guard, and the water flow from the car wash machine seems to wash it away, so I don't think I need to cut the Tie Band off and remove it every time I wash the car.
In some cases, it was difficult to turn the Nut of the Chain Adjuster because the Guard was out of place, or I needed to use the Thin Open Wrench, but the claws of the latest model have been strengthened, so it is difficult to install, but I think the fixation has been strengthened.
I think it is easy to put them together when you remove the Swing Arm.
View detail
Fits: YAMAHA YZ 250F, YAMAHA YZ 450F
Inexpensive and very good.
I have no problems with the quality, and the price is very reasonable for a new graphic.
You can't go wrong searching by product number, though.
Sometimes the product images are of old and new vehicles or slightly different, which makes me slightly nervous.
Front Fork Guard is not included in the package, so if you need it, you need to prepare it separately.
View detail
อาทิตย์เดียวได้ของ นึกว่านานกว่านี้ ชอบเลย เดียวต้องแนะนำเพื่อนๆต่อ View detail
Grom Number Plate
I wanted to convert my Grom to a Number Plate, so I was looking around.
Discover! Zecke Plate, which is usually sold well, is
I was worried about the large size of the Grom.
This product is usually ordered in advance, so please wait about a month.
I bought it in a hurry when I found it in stock.
The size is just right for Grom and I love it!
Bolt 4 fasteners, solid.
The body of the body can be made without any processing by making full use of commercially available brackets.
It's on. 。 Because Light will be lost.
ServiceCoupler minus Wiring minus FogQuantity:2pc. Set.
I'm installing it.
View detail
Expect a drop in water temperature
Because the 2 division Front Fender for wr250x that I used for a long time faded, I put another Fender this time of Poly sports, but the water temperature seems to rise whether it is the relation of the Slit position. (Checked with a retrofit water temperature gauge) I'm not sure what to do with it. So I replaced it with this MODEL where Slit is close to Radiator. Iwate is the time of year when I can not ride Motorcycle, and I have not tested it, but it seems to be effective. View detail
Chamber guard with good parenthesis appearance
It looks like a gold chamber guard like a fish bone with a resin on top.
I've fallen over many times, but I think the Chamber is protecting me well.
Mud and leaves get between the Chamber and Guard quite a bit, so I have to take it off and clean it occasionally.
View detail
Fits: Others
Good thing it's so light!
It was cold, so I warmed up with Dryer to prevent the plastic from cracking. It was cold, so I worked with Dryer to warm up the plastic so that it would not crack.
My RALLY50 had a grip heater from the moment I bought it, and the handlebar was open end, so I didn't have to modify it.
It doesn't weigh much, so I didn't feel uncomfortable handling it at all.
The only thing is that theAdapter is a little bit sweet, or the quality is bad, or the way you put it on is bad, or it seems to come loose…wow? I think it's like this.
Well, I guess the worst that can happen is that I'll just buy another Adapter and be done with the costumes!
Two-tone color Guard in White and Black will fit RALLY50, I think!
View detail
Fits: HUSQVARNA TE 250, HUSQVARNA TE 300, KTM XC 300, KTM XC 250, KTM Freeride 250 R, KTM EXC 250, KTM EXC 300
The texture is better than the OEM.
The free ride is a replacement type for the OEM cover. View detail
Eurasian bullshit
The answer was that it would arrive in a week or two, but I ended up waiting four weeks. Too much of a wait!
You made me wait too long! You want me to make a difference? You made me wait too long. You made me wait too long. I've been waiting too long.
View detail
Cool, Race ish!
Headlight must be made into a Projector, but it will be Race ish all at once!
It will definitely be an eye-catching motorcycle.
The Slit at the bottom is desirable because it gives the impression of being fast.
The color is also moist black and has a dignified look to it.
View detail