Reviews
Fits: BETA RR350 4T, BETA RR300 2T, BETA RR250 2T, BETA RR400 4T, BETA RR450 4T
Is it all like this?
Why is it so crooked when new?
Are you licking your chops?
Even if it's made in a foreign country, it's too much.
Wonder if all of WeBig's inventory is this crooked.
Do you not inspect the product?
View detail
Installed on TT-R125LWE!
We chose this product because of its size, color, and comfortable design. View detail
![LED Tail Lamps RSP 3.0 [TAIL LIGHTS RSP LED 3.0].](https://img.webike-cdn.net/catalogue/images/34358/8571100001_1_TS.jpg)
Installed on TT-R125LWE!
Lightweight type with Tail, Brake, and License Plate Light.
We have selected this product.
View detail
![Handguard Evolution Integral [Evolution Integral] with mounting kit](https://img.webike-cdn.net/catalogue/images/12302/8305100026_TS.jpg)
Fits: Others
Easy to install! Cost-effective!
I was looking for an all plastic hand guard like the ACERBIS BirdFit and found this product from Poly sports.
Reasonable and recommended compared to Zita.
KX85 is light and does not need to be made of Gold genus, but it will be in Enduro, so it will be Large sturdy if you can protect your hands and Lever to some extent.
I haven't used it yet so I don't know how durable it is…
[How is it used? Used in KX85.
Was the one you received as per Image? As per Image.
Was the installation difficult? It is very easy.
Point and hang of installation The Clutch Side can be easily installed as it is, but the Brake Side is not as shown in the photo because the MASTER and Hose are in the way.
Cut and installed.
How was your experience with it? It has not been used, but I believe it is like ACERBIS BirdFit.
[Included Parts:were they on? Comes with mounting kit.
[Was there anything that disappointed you? None in particular.
[Availability and clarity of the Instruction Manual Instruction Manual is included but only in Illustration.
View detail
Fits: Others
Processing is required, but it's cheap, so it's good!
I was looking for a cheap hand guard that is not Solidly's CloseHand guard, and I found this one.
Parenthesis is ◎! Off car for cosmetics for the price, it deepens the taste of the car.
As for durability "It cracks easily." However, it is good if the handlebar can be made to tilt while at the same time serving as a bush guard at least.
The mounting holes on the One Side are incredibly gapped, and I couldn't help but think that they are cheap and accurate, but that's okay because they are cheap.
View detail
Easy to attach and detach, good product, but may be too robust for TRIALfor Vehicle
[How is it used? For installation of safety parts for TRIAL vehicles (I was expecting TLR200 OEM Product equivalent, although this may not be what was envisioned in the design.)
Was the one you received as per Image? Understanding that Enduro for Vehicle is a robust product when it arrives. (too robust:not Minus).
Was the installation difficult? No problem (Easy and very good as expected, although some ingenuity is required since it is outside OEM use.)
How was your experience with it? No problem (as expected, installation requires some ingenuity, so installation and actual use will be determined in the future).
[Included Parts:were they on? No problem (since it is originally a Single Item).
[Was there anything that disappointed you? too robust (Not Minus)
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fender, full of Wound, was replaced with this one.
The OEM Front Fender is over 10,000 yen, so I decided to go with the less expensive polisport Universal Product. The quality of the product is better than Large.
Surprisingly, it could be installed without any modification. 1cm spacer was inserted in the 4 screws to complete the installation.
SEROW Hook and Quantity to Fender extending from Headlight cover:I have 2pc's plugged in, but there seems to be some interference.
I did not process it because it was not a concern.
The front length is a little shorter, but the rear frame side is not a buttstock of the OEM, so it looks more like a parenthesis.
View detail
Worth the money!
+ Very useful product, I use it every time I tie down the bike. Does as intended and does not add that extra compression to you forks.Feel a lot more comfortable knowing that my forks aren't under a lot of load while being transported. I also have no problems leaving it up on the truck overnight now. It is plastic an I am not sure how long it will last but it is worth the purchase. - Barely had to compress suspension for straps to go tight. Tightened until the tire just started to compress a little Bike did not wobble or move around during drive to track Only thing nicer would have been if it attached to the forks like the ones KTM and Husqvarna provide but those are bike specific and this one is generic. so no complaints View detail
good-looking
It's a bit expensive and hesitant because of the low price point of the original Cover, but it's cool and solidly built that seems to Guard properly.
It is necessary to remove the Shift Pedal once, but it is easy because it is simply attached on top of the original Cover with three Bolts.
I have a my23yz125x and it arrived with no problems.
View detail
Looks sturdy.
It is surprisingly thick and sturdy. I bought it because I was advised to guard this side of the cover because if the cover cracks, it will be impossible to drive.
There is some interference with the spring of the Brake pedal, but it does not seem to be a problem.
The label only says up to my21, but it attached to 23yz125x with no problem.
View detail
The look was to my liking.
I like the way it looks, but the bulbs are EURO bulbs, so the number of bulbs that can be changed to LEDs is very limited.
In addition, the Headlight terminal is a Hira terminal, so the Wiring and terminal must be provided, and since there is no Cutline, it may not be possible to drive on public roads.
View detail
Fits: KTM 450 SX-F, KTM 450 XC-F, KTM 250 SX, KTM 250 EXC-F, KTM 250 EXC, KTM 200 EXC, KTM 150 XC, KTM 150 SX, KTM 125 SX, KTM 125 EXC, KTM 350 XC-F, KTM 350 SX-F, KTM 350 EXC-F, KTM 300 XC, KTM 300 EXC, KTM 250 XC-F, KTM 250 SX-F, KTM 250 XC, KTM 500 EXC-F, KTM 450 EXC-F
I have no problem installing it.
I installed it on a '21 250exc and there was a small gap between the air cleaner box and the outlet for drainage and Garbage.
I repaired it with Tape because I didn't want the water to come up to the Air cleaner when I wash my car.
It is functioning as a mud guard from the original Rear tire.
Good for Orange lovers as long as you don't mind a few gaps. (^^)
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250F
Cheap and reliable
I purchased this as a practice exterior.
It is a good product with excellent cost performance.
OEM at the same price, Quantity:Pair (for Left and Right) You can only buy about Number Seal Cowl.
View detail
License with Lights, plenty of brightness!
I was looking for a product of this type with a License Plate Light.
The LEDs are bright enough.
View detail
It is a little small, so you may need to be careful depending on the type of car.
[How is it used?
I found this product when I was looking for a new light cowl because the vehicle light I had received was a battered Other Brand Product.
I purchased this product in the hope that it would moderately mask the Harness and Meter around the Light in the Front section.
Was the one you received as per Image?
It was a little smaller than I had imagined, and I felt that it was not suitable for my purpose of use. It was a little smaller than I had imagined.
How was your experience with it?
When actually installed, the overall size of the light was too small to fully hide the electric wiring that would collect around the light, and the dimensions above the light were too short to expose the Speedometer, resulting in an overall appearance of poor balance.
The design itself is a good parenthesis, so I think it would be a good fit for cars equipped with compact digital meters these days.
[Points to note]
It is difficult to grasp the overall size of the product unless you see the actual product or see a picture of the product installed on a vehicle.
The design seen from the front is intrepid and Parenthesis is good, but it is a flat design, so when you look at it from the side, it looks like... what is it? It is a flat design, so when you look at it from the side, it looks like... what?
How did it compare to other products?
The design is not inferior to other companies' products, it depends on the vehicle and the installer's Sense (my installation of Sense was incompatible with the vehicle in which I installed it).
Other items that would be helpful
Point and hang of installation
Elastic band and material for mounting:Two types of side stays for plastic installation and bolt & lock nuts are included in the package, so you can install them with your sense of parenthesis.
[ITEMS TO BUY TOGETHER
The H4 head lamp bulbs that are initially installed are not very bright. You may want to consider brighter H4 bulbs or LED Lamps.
[Opinions and requests to Manufacturer
I replaced the reflector in the Lens with an LED position bulb, and the progress stopped, but I would like to see better thermal countermeasures.
View detail
ส่วไว งานดี มีคุณภาพ สวยงาม สินค้าดี ถูกต้อง แพ็คของได้ค่อนข้างดี View detail
It's solid
It was sturdier and more solid than I imagined. It seems safer and less likely to come off than with a proper stick or something.
The price is a bit steep, but once you buy it, it's not something that will break, so I think it's fine.
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
MY2023 for YZ125X
I had been using the same product on my YZ250FX, so I was torn between it and ACERBIS Magnet type, but I decided to go with this one because of its cost performance and reliability.
Installation is simple and is secured with the included thick Tie Wrap.
If mud gets into the swing arm, it can cause minor scratches on the swing arm, so it must be removed and cleaned periodically, such as after a muddy ride.
This may not be necessary for Motocross, but it is essential for Enduro if you do not want to make the Swing Arm too skinny.
View detail
For MY2023YZ125X
I purchased this for my new MY2023YZ125X.
Considering the reSaleValue, the new exterior was immediately replaced with this exterior.
Installation was completed in a straightforward manner with no modifications.
I thought Polisport had a slightly larger margin of error than ACERBIS, but it is no longer comparable.
The price is also lower, so if you are not picky, this one should be sufficient.
View detail
![[PIT BIKE STAND]](https://img.webike-cdn.net/catalogue/images/13445/8981500002_TS.jpg)
Foldable, so it's convenient in many ways.
First, it folds up so it can be left at the end of the car.
And because it is made of plastic, it is lightweight.
It is originally intended to carry off-road motorcycles, but it can be used for other purposes as well.
When you go to practice, you can put a Polyethylene tank filled with water, tools, or use it as a chair.
It can also be used as a step when washing a car.
I have only used it a few times but the strength is perfect.
There are also areas where you can put up stickers, so you can customize it to your liking.
It is a bit expensive, but it is really useful Items to have in your car!
Recommended for Off-roadUser.
View detail