Reviews
Design-wise, it's GOOD
It may not be easy to put it on as nicely as in the picture
It's better to bend it a little bit larger when molding it so that it looks like a fit
There are two ways to choose from:the way to attach Exactly and bind it with Band and the way to attach the attached Clamp and screw it I can do it, but it might be better to put Exactly on it
View detail
Fits: BETA RR 480, BETA RR 350, BETA RR 250, BETA RR 300
Can be installed on the 2020MODEL
The swing arm length has been lengthened from the X-TRAINER2020MODEL, according to the It was Neck to be able to install, but it was no problem I think it's not View detail
Recommended for Classical Custom
I used it for a 31mm Fork
Although it is 29mm on the surface, it is manageable because it is made of rubber and stretched
Or rather, it was rather Exactly
If it's a Honda 125cc or smaller, it's usually under 31mm, so I think you can get away with it
Tie wraps are used to secure the top and bottom, even with the Stainless Steel Band or something like that It might be good
There are no air holes, so it doesn't return as well as it should when it expands and contracts
The top and bottom were so close together that I couldn't get the air out, but just to be sure, Fork's Inner Tube has A thin layer of Grease is applied
If moisture gets in, you'll never get out of it and Rust won't even notice it, so make sure you have insurance! Ugh
View detail
Fits: Others
Easy Makeover
It is the replacement from the current Red to White! (^_^) v
It's good because it's easy to replace
The price is reasonable
A little custom, but I think the image will be very different (^3^) /
View detail
Oh, no
I've written an impresario before, but I'll add to it 。 The lock lever at the bottom broke off while I was using the Motorcycle It's hard to lift, and it breaks in a flash, so this is a useless STAND! I've already arranged for a new STAND, but this is not the way to go when it's so expensive I will never buy anything from this manufacturer again View detail
Fits: Others
It's too tight for SEROW as it is
When I try to put it on SEROW, Brake line and Wiring interfere with each other
I can't install it in the position I want
So, I used ZETA's Clamp and drilled holes and cut the edges of the products
I was forced to put it on
View detail
governor's accuracy
Accuracy is government
I'm going to remove the new exterior and install this one, but
Shroud floats from the tank, and the side number is flexed and attached by arm strength
I'm satisfied with the fact that I can get there and it's inexpensive and I'm a big fan of Large
View detail
Just the right amount of protection
It is just strong enough to fit on a normal 22mm handlebar
The Handlebar side of the aluminum-core Guard is bent when it is hit hard The Handlebar is good for a good feeling even if it hits you No more bending
I've never injured my hand in a race wearing this, so I thought it was a good one It is
View detail
Good for color change
The exterior is now available in POLISPORT products
It's completely unnecessary if you don't care about the color
The OEMGuard was damaged and replaced
Prices are higher than OEMs
Other Radiator Shrouds have screw holes that are too large or
The dimensions are a bit sensitive, but it's a small part and
Screw hole dimensions and large size are exactly the same as OEM
View detail
Pretty good
I haven't installed it yet, but since I'm a Manufacturer here, it's an accuracy issue The fact that there was no discomfort when it was stacked with the Side cover shows that there is no I would say that the same can be said for the Also, there is no BALI and the texture is good But there is a hole at the position which seems to be a seam of the mold It is located at the bottom of the back end of Seat But it is not so obvious unless you look closely
For these reasons, I can say that it is a good cosmetic product and recommended
In addition, because I am not compatible with the vehicle of another manufacturer, it is naturally Large It needs to be processed What is this guy doing?
View detail
Fits: Others
A shitty product, not a shitty product
I bought it because of the comments that were written about how relatively easy it was to install Do you get it? Level called
When trying to force the wire into place by force, it is not possible to use the Clutch Wire or the Throttle Wire Interference is inevitable To avoid the interference, both Brake and Clutch Lever started to go in a ridiculous direction
I think it looks good, but if it doesn't stick, it doesn't mean anything
Worst, worst, shittiest product ever
Large It's like throwing away your gold
This is a product you should not buy
I know you can't do it, but I dare say it, Gold back!
View detail
It's hard to install, but the finished product looks great
Because it is universal, the size does not match with the size of this product I guess
Quantity:Pair (for Left and Right) Mirror, loosen the Brake Fix the inside first
Because the Nut of the connection part will fall off, it is better to use Vinyl Tape to make it thicker before fitting
If you use the flexibility of plastic and fix it so that it doesn't interfere with Hose, it's completed
It's a white body with red color
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 250F
COSPA ◎
Cheap but neatly installed, and a color that the OEM doesn't have, Parenthesis good!
On the other hand, the installation is a bit fuzzy, whether it gets habitual in the box or not It's a bit minus a few scratches in transit, but I put Decal on it so it doesn't matter The price makes it tolerable even if it is not so well made
View detail
I am satisfied with Large change
I'm happy with the product, but I received a different design than the one pictured, but I liked this one better It's a blessing that we received what we thought was Design's View detail
It was different from the image
I should have checked the images and text carefully and inquired about it
The picture has 14 bellows, while the text says 28, and the one I received was the one in the text It was one of 28 things
I assumed that I would receive the image as it was, so I didn't pay attention to the text … I I think I should change the image to the correct one, although I made a mistake in confirming that I did
View detail
Unnecessary
KTM 250EXC-F (sixdays 2017 MODEL) Attached to
I wanted to put Decal on the Swing Arm and I wanted it to be Black
Double-sided tape and Tie Wrap on the inside to attach to the Swing Arm The Tie Wrap will break, depending on the run
A MOTARD dress-up would be fine, but not for running the BALIBALIOff-road I wondered if I didn't need it
There's also mud between the Cover and Swing Arm, and the Tie Wrap has to be looked at often It's also a bit expensive
It's your choice...sort of
View detail
Elastic band's fixed pin is too fragile
I bought it for the price, but the elastic band attachment part was broken immediately
I mean, it's built in such a way that when you put it on for the first time, you can take it off
I am thankful that Poly sports products are inexpensive in general, but there are some disappointing quality products here and there There is
Well, is it brazen to ask for something cheap and close in quality to other pricier items (^^;
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
Easy and reliable
Installation is very easy as it is a Tie Wrap and in the case of YZ125 it is on the swing arm There is no need to remove it because there is a hole for the maintenance hole as well I chose Black to match the BlackRim because I could choose between Black and Black, and the scratches on the Swing Arm It seems to be able to play without worrying about the stickiness I want to keep going
View detail
Fits: Others
It's cheap, light, and straightforward to take on
I have never installed the Hand guard, and I have never used the Hand guard of Aluminum or I was worried that the Hand guard with a core would be more durable and last longer, but I didn't want it to be heavy And Material:If it is Hand guard etc. of Aluminum, there is no way to install the Grip end part But I can't install it to the Handlebar, so I choose this one
As a result, this was the right choice for me It's light, easy to install, and the Grip end part is made of Material:Because of the Plastic, it bent straight and installed beautifully
The durability is also stronger than I thought it would be, although I've already beaten it a few times with the Enduro
However, the construction of the included Aluminum Collar and Screwetc. is cheap If this gets better, there is nothing to say
But I bought two more afterwards because they were so much better than I expected
View detail
Fits: GASGAS EC 200, GASGAS EC 125, GASGAS EC-E 450, GASGAS EC-E 300, GASGAS EC-E 250, GASGAS EC-E 200, GASGAS EC-E 125, GASGAS EC 450, GASGAS EC 300, GASGAS EC 250
It arrived about 20 days ahead of schedule It was more solid than I expected
I was worried about the fit, but I was relieved to find that it fit perfectly, until now, I've been using Decal for the year I could tell, and the design was old and puffy I wish I had replaced the exterior of the car earlier It's so beautiful and shiny View detail