Reviews
very good
There are many people who are working in their own works, but once you buy it you can use it for a long time so I was happy to buy it, usability is good There is a sense of security, as expected it is recommended, recommended. View detail
I was not worried
My Motorcycle (GSX-R1000 K3) ROD has too thick to be addicted, I was not worried because I can work even if it is disappointing but a bit disappointing. View detail
Recommended if you regularly do ForkOH.
I think that it is better than the Special Tool of Manufacturer OEM because it can hold the compressed state.
I can work alone, and I can work far more safely and reliably than a substitute tool.
View detail
It was easy to use
I bought it to replace the 3XV Fork oil.
Not all Inverted Front Fork is necessary, but 3XV can not work without this tool.
If you examine it with Net etc, there are some who are making homebrew tools by buying L-shaped Bracket etc. at Home center, but I will recommend this Compressor at this price.
Although manual is not attached, I think that it can be used without problems.
View detail
Extremely convenient
Useful when removing Fork top cap.
Exact length and moderate hardness.
Top cap is not scratched.
It is recommended for those who are regularly serviced.
View detail
BFF also
Since BalanceFreeFork of GSX - R1000R also had Top cap of 45 mm, it purchased.
I was convinced of the price with the Cut-out of the rain.
Like the Socket wrench's PowerFit, the groove is digging so as not to damage the BoltHead's Edge and it can be likable.
View detail
it's the best
For Front Fork also has thickness and protection effect is outstanding. Simple Rear shock Sub tank of WR 250 R became quite luxurious. This Recommendation. View detail
Required for Inverted Front ForkMaintenance
Used for ZX14 ForkMaintenance. Just until Piston rodNut comes out Color's Clamp bolt will interfere with the Inner Tube and can not be lowered .... It is not a Level that can be picked out even if it is pulled out. Without helping at home center Bolt and Nut (M12 Pitch 1. 25) Purchased and dealt with. View detail
Increased cost effectiveness
I installed it in the 2014 Touring SEROW.
Exchange of Tire to IRC 210 because the forest road also stopped going so much.
I totally Renewal the undercarriage I was interested in.
You will be able to speak greatly of the Gap that was digged before and after Manhole.
Is not it the shortest way to get your favorite ride?.
View detail
It is not helpful
It's an exchange from Suspension that took 50,000 kilometers and so there was nothing wrong with the car body and the car was steady and the running became fun. View detail
With this, you can work comfortably
Originally when I was riding in Motorcycle of Ekishin Fork, year 1 - I was willing to exchange Fork oil twice.
However, after changing to Inverted Front Fork's Motorcycle, I was hesitating from the necessity of Special Tools to replace Fork's Oil.
About 3 times I created a self-made tool of about 1000 yen at Home center from the Net blog article, I was exchanging Oil, but when I use it cut off Bolt's Nut as Quantity : Pair (for Left and Right) Because it is necessary to tighten it alternately, we consume a lot of power and time, it got almost half a day work and the next day the arms and back were every muscle pain every morning.
As I was expecting, this work became tougher after the age of 40, so I was looking for a special tool, but when I saw that I was working on a go-live Motorcycle shop and I was working, the price was cheaper than the similar item I bought it because it is a product of technics with a reputation for Suspension OH.
As for goods, Fork 's Color presser parts are attached to long columns of similar products and Fork' s Color presser parts are attached, moving the column downward by tightening Screw, this product is integrated with the upper half of the column and Color presser, The entire column will move to expand and shrink.
As a result, this product can shorten the total length when stored.
For Color hold down, it is easier for Spring collar to process the tip of Hexagon Bolt, and you can lower Color more firmly than the product that just uses Screw as it is.
Speaking of the difficulty, in the picture of product description Material : Silver color like Stainless Steel, but in reality it is painted in black with iron, so it was different from the item explanation picture and I was surprised.
For work, adjust the Screw of Color holders according to ForkColor, then turn Nut on the upper part with Ratchet short, Large and Fork Spring shrinks without the need for force, so working time is shortened and muscle pain of the next day It was released from.
With Spring rate change etc. etc. You can also feel free to set up Fork including including.
View detail
It will not be talked about it without it
It is essential for people who OH for Front fork by myself.
The price is also affordable and very easy to use compared to other similar things.
We almost no longer use force for disassembly and assembly.
View detail
Recommended
Normally when burning in Inverted Front Fork, amateur work hooked Stainless Steel Wire to DamperROD to raise ROD, but Ignoring Oil that is blowing up by raising.
If you use this ROD, you will have to seal it there so you have to finish halfway and you can perfect air bleed.
Four types of Screw diameters - Because it corresponds to Pitch, it is recommended for those who have hesitated to arrange Special Tools for each Motorcycle Manufacturer.
View detail
first
I first exchanged Oil of the inverted Front fork. SHOWA's 41 pie about 20 years ago. From now on I think I will exchange Oil once every two years. View detail
Lack of explanation of goods
I bought it for things like for On Road, but the depth of Bolt hooked in the hole of Spacer was short, so I could only hook Bolt to One Side for my Motorcycle Spacer. When I contact Manufacturer "Please understand that it is a universal product" I did it with. Universal Product that can not be used widely At least the usable range (Size) I think that should be explained. By the way my Motorcycle is famous ManufacturerY
View detail
It is exquisite, COSPA rinsing
I was planning to give Rear suspension this time to Mr. Technics for OH. I found Decal here and purchased it.
It was definitely thin from the price and I did not expect the protection effect - - - I was surprised to hear that it was quite thick and extremely easy to stick. Protection effect is also ☆ 5.
Sticker also F / It was a super deal set containing not only R suspension but a total of seven pieces.
With this gold amount, how about this price is FFork decal of other company is this Quality? It will be more than three times.
Design is also very satisfied well.
But Mr. Technics, do you get profitable at this price with this quality? It is Decal that you will feel better as you always ask for it.
I would like to put it on other Motorcycles, if possible, so it would be great if you could increase the color variation.
View detail
Technics GEARTEC-1. 1 SEROW250
I installed it the other day and tried running actually
It is impression that I tried two kinds of Spring pre-road of recommended setting of the shipping state
Even in empty condition, it will sink compared to STD
Although it was not described in the factory setting, it seems that we do not assume two people riding
I ran Ferat Dirt
The ride feeling is good with the initial impression of Soft
I tried to raise the speed and fly by the bump and including sudden braking
Landing steadily absorbs shocks with STD. I'm looking forward to the future as tracking ability can be changed according to your preference with Damper's adjustment mechanism
Pre-road adjustment must be removed from the vehicle
This time was exchange with Front spring at the same time
Considering Balance, Front does not have a pre-road adjustment mechanism originally, so it may be necessary to exchange at the same time or to adjust Rear's Pre-road to STD
In any case it is a comment that I think that it is a product more expensive
View detail
BPF special tool
I bought BPF Motorcycle so I bought it for maintenance.
As a result of various investigations, I think that this product was the cheapest.
If it is 45 mm, it is not a place to be frequently maintained so we do not care about Materials, hardness and precision so much, so I think that COSPA is good.
View detail
You can use it surprisingly
Material : Because it is Plastic, I purchased it because I thought it was safe also for Aluminum's Fork cap. Rather than ordinary Plastic, it is a solid plastic that is mixing something. Fork cap that I closed with MONKEY was able to relax by this with a single shot. Since traces like surface contact are attached to Wrench, I do not know how much it will have, but Large is also good as it is in Wrench that is also friendly to Aluminum.
I thought that it was a place called TECHNIX.
View detail