Reviews
![[Mr Quick] Turn Signal Garnish](https://img.webike-cdn.net/catalogue/images/132007/mr19-cc07-01_TS.jpg)
Easily Black Spec.
[How is it used?
Street riding.
Was the one you received as per Image?
It is not so bad, but not so bad.
Was the installation difficult?
Just remove one Screw and insert it.
How was your experience with it?
Blinker's Plating was a bad girl and I was concerned about it, but here it all went away.
[Was there anything that disappointed you?
Roughness of the manufacturing process. BALI removal and file hanging are essential before installation because of the great BALI.
Other items that would be helpful
Availability and clarity of Instruction Manual
No Instruction Manual.
Opinions and requests to Manufacturer
I would like to see you at least take BALI.
View detail
Rear looks great!
The Rear of the Left Side of the MONKEY was lonely, so I replaced it with this product and now the Rear is Polished and looks great! (^^) /
The quality of the plating is good, not only on the front side but also on the reverse side, and the entire surface is polished.
I am glad I bought it because it is reasonably priced and looks very different.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
Cost good.
I am satisfied with the appearance of the product for the cost. View detail
Double Bulb included is a nice touch.
The OEM stop-lamp ran out, so I replaced it with this Smoke Type product as a change of pace. It looks better than it does in the picture. [Color] Smoke feel." The "M" is a little bit smaller than the "L" and does not look bad even if an old man rides on it! View detail
very good
This is a part that can be easily installed. It also shows high satisfaction compared to the price of the parts and the difficulty of the installation work. The painting and quality of the product are perfect.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Colors.
Restore, and since the Brake lever did not get a satisfactory shine even after polishing, I ordered a Lever Cover.
However, since Blue is no longer available, I decided to go with Red.
Since it is a moped, the ball at the leBar End is small, so it was easy to attach.
It is soft, and the operation is comfortable and Recommendation.
View detail
Fits: SUZUKI ADDRESS V50, HONDA XR50 Motard, HONDA SS50, HONDA SL90, HONDA SL125S, HONDA MD90, HONDA CS90, HONDA CS50, HONDA CS125, HONDA CM125, HONDA CL90, HONDA CL70, HONDA CL65, HONDA CL50, HONDA CL125, HONDA CB93, HONDA CB92, HONDA CB90, HONDA CB50, HONDA C92
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
We were able to immeChain at a reasonable price!
I am very satisfied with the Plating, which gives it a luxurious feel (in my opinion) and Large. The impression has completely changed.
I read in the comments and the instruction manual that the ETC receiver in the Meter may not be able to receive the signal unless it is relocated, but some other sites said it was Large sturdy, so I installed it without relocating the receiver. In my case, the Gate opened and closed without trouble, so I am relieved.
View detail
Stable and low-load operation.
The Normal blinker relay was not stable and was replaced with this one. the Normal had a click-chica-chica-chic sound and vibration, but this one has no sound or vibration. Moreover, the blinker bulb seems to be brighter without changing. View detail
More than the price
Purchased for SUPER CUB110 (JA59).
Machining accuracy is quite rough. (Sweat)
But I was able to install it without any problems,
ShieldBody was Beauty when the protective film on both sides was removed.
It is good to keep the wind out of the room.
I am Large satisfied with this price.
View detail
Bolt is highly universal and can be used for various purposes other than Screen.
[How is it used?
I purchased the OEMPin that holds Screen to Cowl because it was getting tired with age, but I had a few left over and decided to use them for another purpose.
Was the one you received as per Image?
The product was just as bright Blue alumite as the image in Webike's product introduction section, and the color was exactly as shown in the Image with almost no difference in color.
Was the installation difficult?
When used for Screenetc., the OEM fixed pin (Rivet?) may need to be removed depending on the car model.
It takes some time to remove the OEM parts that are not Bolt type.
Once you have finished removing it, it is easy to fix using this product.
If you simply want to use it as a 5mmSize Bolt, it is even easier to simply replace it with the part that uses the OEM 5mmSize.
How was your experience with it?
Although not much time has passed since I started using it, I have not seen any fading, which is common with anodized dyed products.
Since it is a 5mm size bolt, it is not used often except for the Screen, but since a 5mm bolt was used as part of the exterior fixing of the Little Cub, the extra bolt was used to fix it in place.
Since the material is aluminum, it is not suitable for places where high additions are applied, but it works well enough for places where the exterior is fixed.
[Included Parts:were they on?
Material:Bolt of Aluminum with 2 Washers of Nylon and Well nut Quantity:Set contains 10 pieces.
[Was there anything that disappointed you?
If you can use it as described above, you can save money because there is a surplus even if you use it for screen depending on the type of car.
Other items that would be helpful
Point and hang of installation
Unlike steel or Stainless Steel, Aluminum is a soft material. When tightening or unfastening, insert the Hexagonal Wrench firmly and work carefully.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
Bolt and Nut's Quantity in a nutshell.:It is a Set, a very straightforward product.
[Notes]
As I said above. Proper Torque Management with Proper Tools." Anodized dyes and anodized dyes will inevitably fade under ultraviolet light, so if the dyes are not to be used for a long period of time, it is advisable to cover them with a body coverretc. to cut the UV rays.
[ITEMS TO BUY TOGETHER
If you want to use it to fix the screen when replacing the screen, use a new screen; for other uses, use a new screen. . the goods that will be required for its use." at the same time, you can save on shipping costs.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible as it is easy to use.
View detail
Monkey 125 brake hose guard
I purchased the 2023 Monkey 125 thinking it was not equipped with a brake hose guard.
The genuine hose guard is also installed in black, but it was installed in yellow to give it an accent.
After installing it, it is pretty and stands out.
I highly recommend it if you want to match it with yellow.
-------------------------------------------------- -------- I bought a 23-year Monkey 125 and didn't have a brake hose guard. The genuine hose guard is also mounted in black, but it is installed to give points in yellow. It's pretty and good to see it. If you want to fit in yellow, it is highly recommended. Powered by Google Translator
View detail
Quality!
The plating is of good quality with no floating!
I used it to Repair a Blinker that was mogged when it fell over and I am Large satisfied!
View detail
Recommended!
Not bad!
But I wonder if Rust will be out soon….
View detail
Fits: SUZUKI RG200 gamma [gamma] F N 92, SUZUKI Wolf 250, SUZUKI Wolf 200, SUZUKI Wolf 125, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Inazuma 400, SUZUKI RG125 gamma, SUZUKI GSF750, SUZUKI GS400E
It's enough
I don't know about the durability, but cosmetically speaking, it's a good product.
That's good enough for me.
View detail
Good value for money.
Good fitting product. Looks great. As per the manufactuers advisory- The powder coat has minor chipping/damage on one of the mounting brackets. But this is a minor issue and isn't visible once the rail has been fitted. View detail
I'm satisfied
My Monkey 125 got prettier I recommend it as a color matching item I think it's a suitable item for beginners because it can be easily installed with a spanner View detail
Incredible value
Bought the Doreme bodykit, had it sprayed myself ,my Zephyr 750 looked great but I felt something was missing so I bought this chrome Madmax front fender to replace the original painted Zephyr front guard. WOW what a difference! If I say so myself my bike looks fantastic now a real head turner, this guard is not metal or chrome but still fits and looks incredible. Top marks to Webike for great price and fast delivery too. View detail
MONKEY125 pica.
The manufacturing is also OEM Product and Exactly and there is no problem with the plating process and there are no scratches. View detail