Reviews
Fluffy
Previously, I bought it for Guts Chrome, but it was a totally different thing. Coating seems weak here, there is Old feeling like being used from the beginning. You may prefer it if you like it. View detail
I used it for processing Blinker. Inexpensive ◎
I am watching Impre and buying it for Blinker and using it.
Certainly it is exactly right to enter two Exactly.
There was also flexibility and it gathered cleanly.
Akihabara's Sengoku same etc etc. Or rather cheap, so it's recommended..
Rather than being covered much by Sengoku,
(It is natural that it is not specialized in Motorcycle)
Depending on Size NeoFACTORY may be better ^ ^;
View detail
Cheap and convenient for selling out
【What made you decide the purchase?】
It is a place to sell out in meter units, whatever you say DAYTONA etc etc etc. , It is overwhelmingly cheaper compared with other companies.
【How was it actually used?】
It was good that it was almost same as the one used for OEMHarness.
However, since this product has a slight gloss on the Tube itself, if it is used for Ninja 250, since the original Tube is non-glossy, will it just float for a part just changed?
[Others]
Since there is no Manufacturer notation on the Tube itself, I do not know where it was manufactured so that it is for reference.
In the case of automatic for Vehicle, Catalog at Yazaki Denki has a heat-resistant temperature of 100 ° C.
However, PVC (Polychlorinated Vinyl) Since it is 60 degrees to 80 degrees itself, I think that it is good to use it within this range just in case.
View detail
Because it is hard to obtain it unexpectedly, when you buy it together at shopping, ◎
【What made you decide the purchase?】
Cheap price.
【How was it actually used?】
Quality is good and can be used without any problem at all.
【Was it difficult to install? (Hard parts case)】
It is not difficult.. If ordinary code you can enter up to two.
【Please tell me the point of installation and hang (in the case of Hard parts)】
If only the code 2. If you have a Bullet Terminal you can only pass one Bullet Terminal.
It is better to use Oil spray or soapy water when passing the Bullet Terminal.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Large can of measure of (How many items to enter, etc.) And the set sales of 4-6-8 - 10 mm also exist
I think that it is convenient..
【Have you compared items?】
OEM Product, Heat Shrink Tube
[Others]
For Blinker's Wiring. We bought it with Big.
If it is 4 mm on the image, Large body code Quantity : It will be Size for 2pc.
If there is a Bullet Terminal, you can only pass one Limit. The second one is impossible. Honestly code Single Body
It would be better to install Bullet Terminal through.
Although it was cheap, I was worried about quality but it was a fear. It is quite unrepeatable with OEM.
Until now I was deceived by Heat Shrink Tube, but it gets worn out soon and it looks not good as well.
After all the exclusive Tube is usability - It looks very good.
Incidentally before buying just in case in Akihabara same etc. I searched for items, but it is over there
Things were mostly for indoor use, Size and thickness were not good. On a Tube that is likely to be used
It is expensive as it gets. It seems everywhere seems like it seems quite handy.
So, even though I want it, it is hard to get it out of the unexpectedly
I think that you should buy it when you shop.
View detail
Since appearance was also uneasily bad only at a Cable tie although a longer code is bundled, the Tube was purchased to it.It was a Size of the Exactly letting two codes of the thickness of 0.5sq pass. Since it stops passing also by the diffe
Since appearance was also uneasily bad only at a Cable tie although a longer code is bundled, the Tube was purchased to it.It was a Size of the Exactly letting two codes of the thickness of
0.5sq pass.
Since it stops passing also by the difference among merely few Sizes if it becomes this thickness, before purchase, cautions are required.The tube body has sufficient thickness and elasticity to protect a code, and is very easy-to-use.
Since it can purchase per meter, it is dramatically convenient again that only a required part can be obtained.
I thought that it was very appreciated as a Sunday mechanic that such accessories are in a Lineup perfectly although it is a casual Parts.
View detail
Five pieces are purchased for [Webike-monitor] wiring protection. The best for the place which is too thick in the corrugate tube currently sold anywhere. Since there was no exactly good tube very much for wiring protection even if it looked for t
Five pieces are purchased for [Webike-monitor] wiring protection.
The best for the place which is too thick in the corrugate tube currently sold anywhere.
Since there was no exactly good tube very much for wiring protection even if it looked for the home center etc., it was saved.
Hardness is also moderate.
Thickness apt at two wiring of 1.25.
Even if three enter, are they last-minute?
Since one is sale by 1m, I want a longer size.
View detail
It purchases for protection of wiring. since it is a possibility [ of stopping changing and passing ] size, a coupler, a plug, etc. coming out if it does not cover first -- cautions.
It purchases for protection of wiring.
since it is a possibility [ of stopping changing and passing ] size, a coupler, a plug, etc. coming out if it does not cover first -- cautions.
View detail
For HID (H4) ... In order to make it crawl on the bottom of - zephyr tank for extension cord protection.
For HID (H4) ... In order to make it crawl on the bottom of - zephyr tank for extension cord protection. View detail
It is very convenient when rebuilding, harness processing and. I have also satisfied appearance well. Although pains were taken to put in wiring at first, when having held the hang, it came to enter simply.
It is very convenient when rebuilding, harness processing and.
I have also satisfied appearance well.
Although pains were taken to put in wiring at first, when having held the hang, it came to enter simply.
View detail