Reviews
If you don't care about Logo and so on.
When I changed the Clutch master to brembo Radipon, I used this instead of the Mirror Bracket.
If you don't care about Brand logo etc., it is functional enough.
View detail
The price is too high.
The texture of the product itself is good, but there are some scratches and anodized parts that may have been caused by the aluminum cut-out process, and the finish is not good for the price. (6,000 yen is too expensive for this) View detail
Screw hole position required!
Because I changed to Nisshin's Radipon, the position of Mirror Holder became asymmetric between Clutch Side and Brake Side.
However, it is not possible to install it as it is because the hole position does not slightly match with the Kawasaki OEM clutch side of our model. (It is necessary to extend the hole position by a few millimeters)
I had no choice but to order a Kawasaki OEM Mirror Holder to solve the problem. I think the quality of the product itself is perfectly fine.
You better check the Screw hole Pitch when you buy it!
View detail
Fits: Others
Honestly Cool.
I've been looking for a Mirror Clamp.
I've found Craftman's products among many others.
Mirror is offset to the outside
And the colors are very nice.
You can also paint the logo of a casual C in white red.
This Clamp makes me want to make the Bolt a Titanium!
View detail
Be careful with the dimensions!
Radiphone introduced, but Quantity:Pair (for Left and Right) I bought it because the Mirror position has changed in
The Clutch Side can also be made with Mirror Holder to make the quantity:Pair (for Left and Right) However, I couldn't install it because the dimension of screw hole is a few millimeters different from Kawasaki OEM Clamp.
If the Screw hole position is widened with File etc., it is possible to install it, but I was worried about the strength, so I bought a Clamp with Mirror Holder of Kawasaki OEM and solved the problem.
There was nothing wrong with the product itself, I just didn't do my homework.
View detail
Material is solid.
Required if you want to install the Mirror on the brembo Master CylinderClamp.
The price of the clamp alone is very high, so I'm looking at other brand products, but if you're looking for materials and precision, the brembo OEM is definitely the way to go.
There are products like Posh and Craftman in Aluminum cutting, but it doesn't matter anymore if the color doesn't match up with MASTER or not, the Material and treatment used is clearly different.
If you're going to use the brembo MASTER, I felt it would be a shame to lose some of the rigidity in this area.
View detail
Fits: その他
I bought it to install the HurdleMirror.
Well made, good color, and the price is worth it.
cMark is seriously digging it and it's interesting.
I would like to buy from you again in the future as you are a reliable manufacturer
View detail
Cheap.
The build quality is good for the price, but the shape is rather crunchy and I personally find it a bit delicate. Anodized is beautiful and the screw holes are fine, so you can use it without any problem. View detail
Not for the same purpose!
I installed it on the MBX sander, FranceYamaha's Max star125.
Buy 4 of them and Quantity for Mirror:2pc. Set and the remaining Quantity:2pc. The Set was purchased to attach the Bracket for Meter installation.
The Handlebar was converted to a bar handle, so I thought about it and installed it by hand.
I was able to put it on good as I intended.
It's black and inconspicuous in a good way, so it gives a casual, custom look.
View detail
The texture and design are both excellent!
It was introduced at the same time as the LightClutch holder in March of last year.
It is Large satisfactory in terms of rigidity, texture, and design if I compare it with the original OEM, though I did not compare it with the other company's product.
I should have made the brake holder here too...
View detail
It looks good. But I'm a little tired of the bullish pricing.
Handle mirror & Handlebar area is unified to brembo.
Changes.
Mirror:Cowl mirror ⇒ Handle mirroring
Replacement/Additional parts.
Using Z800Handle mirror
・brembo MirrorHandlebar clamp
・SUSSpacer D14.0mm, t2.0mm
The Ninja1000SXCowl mirror is transformed into a Z800 OEMHandle mirror for a cleaner look.
The Mirror on the market is excellent in terms of design, but it is undeniable that the mirror surface may shake at high speed driving. Since there are concerns about the strength of the product, the OEM product with a proven track record of reliability is the one to choose.
In the case of OEM products, the basic M10 handle mirror is still able to be installed.
In order to avoid the blurring of the mirror surface, the Handle mirror of the aerodynamic type is chosen, and although it will be chosen from the Mirror of Z series, it became Z800 by a process of elimination to avoid the interference with the Wind Screen and to be compact in the direction of the width of the car.
The price is also very reasonable for 1pc, probably because it is made in Thailand.. It was the cheapest at about $5,000.
The installation should only install Mirror after clamping to Handlebar, but it does not seem to be attached as it is.
Because the length of the screws is too short for the brembo, it will hit the upper bolt which clamps when you try to tighten it to the end.
It's hard to get a spacer for M10 because the size of about 14mm OD doesn't exist in general. I managed to find an existing product and bought 2 types of t2.0mm and t3.0mm by insurance.
The result was Large sturdy at t2.0mm.
I bought it on the spur of the moment when it was on Sale, but I think brembo's Holder is too expensive for Quality (lol).
View detail
Used to install YZMASTER on a SEROW250
It is used to install YZMASTER to SEROW250
It is not so unnatural to combine it with the silver-colored YZMASTER
The Handlebar has been replaced with ZETA's MX-123 and it works fine
The bolts are also solid with Stainless Steel
View detail
To use the Ono SpeedLightClutch holder on public roads
When using the Ono SpeedLightClutch holder on public roads, the Back I need to install the Mirror, and this product is what I need to do
I am very happy with the rigidity and quality of the product
Cut-out and say also Parenthesis good
View detail
Useful universal attachment bracket
This is a nice bracket made from high quality aluminium. It is marketed as an auxiliary mirror attachment/bracket but it can really be used for anything that can be fixed to it with the correct sized bolt. I have used mine to attach a mobile phone holder to the handlebars. It also supplied with certain Post branded brackets. The clamp in for 1" tube and the hardware does not rust - I've had it on my handlebars for 3 years and about 25000 miles and the screws have not corroded at all. View detail
Preparing to install the RamMounts
What made you decide to buy?
This is to install Ram Mounts and XGrip to MyGROM
How was your experience with it?
This is a high quality Aluminum Cut-out with a high quality feel.Ram MountsBallMount (M 10×P1.25) installed Screw lock agent (medium strength) was used to stop it from loosening
The Hexagon Socket Bolt that came with it was Steel I think it will rust later on I went to the nearest home center and found the Material:I went and bought Stainless Steel and replaced it
Was the installation difficult?
Easy to install! Hexagonal for use with Hexagon Socket bolts Anyone can install it if you have a wrench However, if the installation place is small, the difficulty level will increase
View detail
Casually...
What made you decide to buy?
The KOSO:Mini3Digital air-fuel ratio meter is installed in the Bore up GROM, and it's a good idea to use it casually and securely Parenthesis to install well!
How was your experience with it?
ΦFor 22.2mm Handlebar, unless you have a very good Handlebar I think that it can be installed in most Handlebar Also, since there are two kinds of Mirror mounting screw sizes, it is necessary to confirm when purchasing This time, in conjunction with the Active:Digital Monitor Compact Bracket I bought the M8/Pitch 1.25
Was the installation difficult?
It was a difficult place to work, so be careful not to damage the other parts I worked while Also, since the mounting bolt is M4Size, you need to be careful with the tightening torque ! The position of the body is in anticipation of future customization It is installed at the position in anticipation of future customization
【Please tell me the installation point and hang】
The mounting point is the same angle and position as the meter! I had to check several times to make sure that the Meter Bracket doesn't actually interfere with the other parts! Don't let me get mixed up with the other Meters again! I made the final form and tentatively assembled it and checked it several times
[Others]
The price is about $2,300 Cheap price! I don't think so, but since the manufacturing is done in Japan, I have no complaints about the quality and finish This time, I'm going to use the KOSO:Mini3Digital A/F ratio meter in a more casual way, and at the same time, I'm going to use it as a tool to help me get the most out of my car Parenthesis well prepared to install, but quite prepared to include Meter as well It took me a while, but this part is also pleased with the world of self-satisfaction
View detail
Fits: Others
bad
This time I wanted to use it for my Blake master's pie 19×20 Maybe it's because the MASTER is an old one, but the holes are in the wrong position and I couldn't install it Please describe in detail what can and cannot be installed View detail
only this one!
Because it is thinner than the Holder of another company, it is useful when using the OEMSwitch box.
I bought Black this time but since Bolt is Silver, Bolt stands out when using Radial master etc. w
If you purchase separately Black Bolt and change it or paint it to make it unified, I think that the surroundings of Handlebar will be more tighter (? ▽ ?;)
View detail
After all it is not JAPAN
? 【What made you decide the purchase?】 Since cheap analog products have broken, I selected a Manufacturer item.
? 【How was it actually used?】 I am firm and secure.
? 【Was it difficult to install? (Hard parts case)】 it's simple.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Since there is a possibility of cracking if it narrows too much, it would be better to use Torque wrench.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?] None. It was as expected..
? [Request to Manufacturer - Please tell me if there are any improvement points】 No particular.
? 【Have you compared items?】 None.
? [Others] Many inexpensive products mimicked just the form, but again I realized that the price and the quality are in proportion.
View detail
It is good for various Bracket
I bought a RadarBracket for installation. Last time, No Manufacturer item Quantity : 1 Set of 2pcs. Although I purchased, the Screw division caused a crack. Especially, Motorcycle thinks that Brand that is reliable with quality emphasis is good because vibration and impact of road surface are transmitted via Frame. Dropped out while driving - It is heavy Large when it is involved. View detail