Reviews
Cannot be installed.
19 Corsa in Bembo I purchased a corta Master Cylinder at the same time, but since the Master Cylinder is not a RACING Cylinder, the mounting angle does not match the handlebar.
I bought it for Bembo without any doubt, but it was a fit for NISSN, but the description only says Bembofor Racing, which is a pitfall for a manufacturer.
We will post our impressions so as not to make the same mistake.
View detail
Installation is available to PRO at ??
The OEM Product has to be removed and the parts used, but it just won't fit. In addition, OEM parts will be blown away by the wind, and in case of loss of parts or failure, the entire ThrottleBody will be assembled and the manufacturer's stock will be gone.
I managed to get it back to OEM, but Mt. Screw was a bit nappy.
View detail
I asked for a ShortMount and got a LongMount.
I asked for a ShortMount and got a LongMount.
I submitted a return request and they never returned my call or returned my call at all.
View detail
This is a product that should be sold mounted on the Lever from the beginning.
I managed to install it all by myself.
I skipped the split Pin and lost one.
I bought an additional one, so only one Knob is left.
View detail
How do I cancel an order?
I got an email that Engine slider for W201217A2231SR400 is out of stock from Manufacturer.
I cancelled my order, but I could not execute it from the web.
View detail
Only looks
High throttle exclusive for RVF was purchased because there was only this item. I will arrive if you process other items, but I decided on looking good. Mounting on arrival quickly, turning Throttle will not turn (There is a stuck). Wire maneuvering was not good so I will not turn back to handling as per Service Manual. After all, I tried various things for about 4 hours, but it did not turn around after all. It was a product that seems to be not tested though it is a car model exclusive product. Perhaps the structure of Wire is too bad. I think that the Outer is interrupted in the middle of the Wire and bends at the point where the Wire is exposed and it does not turn to resistance, Why is this structure made meaningless?. It was only good looking (I also feel that it is not much different from Chinese, but ...) It is better to process and install AXIS. View detail
Fits: HONDA XR250, HONDA XR250 Motard
Fuck.
Aluminum Stopper not included.
Even though it is relatively expensive, it does not inspect it and the shipment is sloppy..
I decided to purchase seeking a sense of security.
Really really bad.
View detail
Fits: YAMAHA SR400, YAMAHA SR400 Disc brake car
Detailed description is missing
This is Speedometer Cable of for Disc brake Vehicles
We can not install because of Drum brake
I would like you to describe it in detail and item name properly
It was useless shopping
View detail
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA FZ400, YAMAHA XJR400R, YAMAHA SR400, YAMAHA XJR400, KAWASAKI GPZ900R, KAWASAKI Z750 (water-cooled), KAWASAKI Zephyr X, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI ZRX1100II, YAMAHA FZS1000 Feather, KAWASAKI Zephyr 750RS, YAMAHA XJR1200, YAMAHA XJR1300, KAWASAKI ZRX1100, KAWASAKI Zephyr X, KAWASAKI Zephyr 1100RS
Brake fluid leaks.
The color was as expected color. Try installing immediately, when holding the Brake lever, the Fluid solution leaked out. Taking it out, there is a step between Diaphragm and Cap inside, compared with OEM Product, 0. I think that there is a step as little as 5 mm and that is the cause. I do not know whether there are individual differences, but my own did not match, I could not use it.
View detail
Fits: HONDA CBR600RR, HONDA CB1300 Super Four, HONDA CB400FOUR (air-cooled), HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA CRM250AR, HONDA MAGNA750, HONDA STEED400, HONDA STEED600, HONDA MAGNA(V-TWIN MAGNA), HONDA VTR1000FVTR1000F FIRESTORM, HONDA XR250MOTARD, HONDA CB400SS, HONDA X4, HONDA X11, HONDA VFR800, HONDA VFR400
It can not be installed in OEMTop Bridge of VTR 250
Although there is a description with VTR 250 in the compatible model, in OEMTop Bridge Socket interfered with Top Bridge and could not be tightened.
If you try to forcibly tighten you will lick Nut or Top Bridge will get scratched.
It should not be possible to tighten with proper Torque.
If you are replacing the Stem Nut with the OEMTop Bridge of the VTR 250, please purchase the same M20 as OEM.
By the way, the overall evaluation was made as one star, but the goods themselves are good.
It is very disappointing.
View detail
Quantity : 1 Set of 2pcs. It is not!
Certainly the quantity is 1 pc. And is written. I did not check well, but I am afraid, but clearly Quantity : 1 Set of 2pcs. I thought that it was. If it is at the shop, there is no such thing, but caution is necessary for mail-order sales where products can not be seen. I also want to write a note at persistent level even by Wei Big. View detail
I think that being sold after the Lever has originally ASSY(ed), purchasing with the single article, and constructing by oneself itself has made a mistake in this product. It was difficult to carry out press fit of phi1.5mm and the about [ die-le
I think that being sold after the Lever has originally ASSY(ed), purchasing with the
single article, and constructing by oneself itself has made a mistake in this product.
It was difficult to carry out
press fit of phi1.5mm and the about [ die-length 6mm ] pin, and to stop this product to the Adjuster thread part by the side of
Lever.
It is impossible, if there are not a Punch and a receptacle fixture when pressing fit.
View detail
honest [ since it was indispensable to lever exchange, it purchased, but ] -- it is touch as 300 yen ? at such goods. -- it is -- if it is how much, it says -- -- if not but and the lever of that are high and you may follow by OMAKE, I think ?. I
honest [ since it was indispensable to lever exchange, it purchased, but ] -- it is touch as 300 yen ? at such goods.
-- it is -- if it is how much, it says -- -- if not but and the lever of that are high and you may follow by OMAKE, I think ?.
It may be that a lever is such a method of sale well.
If you buy a lever rather than it adds this amount of money and calling it lever sale, an adjuster piece will be an ideal as ! which naturally follows.
Since it is free piece, the engine performance in this components simple substance is an unknown.
View detail