Reviews
No way, Quantity.:1 Set of 10pcs.
I thought that the price of 6v Meter class had gone up since it was sold for about 700 yen.:It was 1 Set of 10pcs.
It's a Meter grade replacement, so you only need to replace two … Well, if you see this imprement, please buy with caution.
View detail
just in case
For use in the car with Phillips Screwdriver for preventing ball breakage while on the road. View detail
CRF250 to full LED
CRF250RALLY50 was not LED only Tail bulb, so I bought it to change to full LED.
There are similar valves available from various manufacturers, but we decided to go with Stanley, a long-established manufacturer of light bulbs, because we wanted to get a good one.
Valve itself is very carefully made and very different from the inexpensive Valve.
The replacement itself can only be done by removing the Seat and then the Tail cowl, but it is not that difficult.
The light intensity after the replacement is also brighter, making it a very satisfactory product.
View detail
For automotive use
It is mounted on board with Phillips Screwdriver as a countermeasure against running out of Valve on the road. View detail
Stable Stanley
We introduced this led by saying Stanley in light bulbs.
The brightness changes as clearly as a light bulb when the Brake is turned on or off.
Then there is durability.
View detail
Savior of old cars
Tail lamp rated 12V23/8W S25 BAY15d StanleyA (BP) Replacement from 4879.
Quite good! Decided to come back here next time!
It is a bit expensive, but I definitely recommend it over purchasing cheap Chinese or other products that are more of a gamble and have many initial defects.
Not the common Red, not the annoying White explosive light, but a soft light emission similar to a bulb color as described.
I wanted to replace the one in my car.
This is a lifesaver for old car drivers who had given up on LED Tails because they were the only cool multi-light LEDs.
The phenomenon where the Blinker would not blink at intersections at night unless the Axel was blown, which is a common problem with old cars, has been greatly improved.
View detail
Standard will be this next time.
Double Bulb is used for Tail lamps, and I'd rather use a reliable brand with Stanley's name on it, rather than looking for a cheap one.
It seems like this is the only place to go for LEDs in Valve in the future.
The light distribution is not the same as that of a light bulb, but it is well thought out, and I did not notice any discomfort in the point light state.
We have not experienced any problems with the use of the License Plate Light as well.
View detail
In fact, if it were an LED Bulb, I think it should be treated as Standard.
Single Bulb, which is likely to be used mostly in Blinker, I'll go for the one with the Stanley name, a reliable brand, instead of looking for a cheap one.
It seems like this is the only place to go for LEDs in Valve in the future.
The light distribution is not the same as that of a light bulb, but it is well thought out, and I did not notice any discomfort in the point light state.
View detail
It's nice.
I replaced it with LEDs because I thought that LEDs consume less power and are more battery-friendly. The brightness is moderate, and the engine speed does not change even if the stop-lamp is turned on during idling, so it seems that the burden on the battery has been reduced. View detail
Fits: HONDA SUPER CUB 50 Custom, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 Street Specification, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB Custom, HONDA PRESS CUB 50 DELUXE, HONDA PRESS CUB 50, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI SUPERSHERPA , KAWASAKI ELIMINATOR 250 , KAWASAKI ELIMINATOR 250 , KAWASAKI SUPERSHERPA
Incandescent bulb for speedometer
Acquired for HONDA SUPER CUB 50 CUSTOM.
Part number No.34, manufacturer STANLEY.
Excellent lamp, everything came up. STANLEY quality is excellent. Includes 2 pieces.
Great lamp, everything came up. The STANLEY quality is excellent.
-------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article of the details No. 34, manufacturer Stanley. Great lamp, everything came up. The quality of Stanley is excellent. 2 pieces in the kit. Great Lamp, EVERYTHING CAME UP. The Stanley Quality is Excellent. Powered by Google Translator
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, HONDA PRESS CUB 50 DELUXE, HONDA PRESS CUB 50, KAWASAKI KSR110, HONDA SUPER CUB 50, KAWASAKI SUPERSHERPA , KAWASAKI SUPERSHERPA , HONDA SUPER CUB , HONDA SUPER CUB Custom, HONDA SUPER CUB 50 Custom
turn filament
Acquired for HONDA SUPER CUB 50 CUSTOM.
Part number No.86, manufacturer STANLEY.
Excellent lamp, everything came up. STANLEY quality is excellent.
Great lamp, everything came up. The STANLEY quality is excellent. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article of the details No.86, manufacturer Stanley. Great lamp, everything came up. The quality of Stanley is excellent. Great Lamp, EVERYTHING CAME UP. The Stanley Quality is Excellent. Powered by Google Translator
View detail
Fits: HONDA PRESS CUB 50 DELUXE, HONDA PRESS CUB 50, YAMAHA VOX DELUXE Model:JBH-SA31J, YAMAHA VOX
High-cost performance light bulb.
The price is reasonable and it's good to buy a spare. View detail
Fits: HONDA SUPER CUB 50 Custom, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 Street Specification, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB Custom, HONDA SUPER CUB DELUXE, HONDA PRESS CUB 50 Standard, HONDA PRESS CUB 50 DELUXE
Very bright and stable Headlight
I bought it to replace the headlight on my CUB CUSTOM50, and since it is FI, I am satisfied with the Stable light and Large. View detail
TZr250R (3XV) Used for Tail lamps in
[How is it used?
TZr250R (3XV) The lamp was used for the Tail lamp of the
I chose this product as a replacement for a vehicle I purchased at an auction because the tail lamp did not originally light up on the vehicle.
Was the one you received as per Image?
I bought it because I was told that it was compatible with OEM Product and I had no problem.
Was the installation difficult?
The Cowl was already removed, so the exchange only took about 30 seconds.
In the case of TZr250R, replacement is easy because the Socket is just twisted and fastened without any special tools.
How was your experience with it?
It seemed slightly darker than the one that came with the original.
It is not difficult to see, and it may be a little darker. It is a Level that cannot be understood without comparison.
The light intensity is sufficient to be visible to following vehicles even at night.
[Included Parts:were they on?
This is the only product as shown in the photo.
[Was there anything that disappointed you?
There is no Level of dissatisfaction with the current situation.
【Review】
Products from a reliable brand that is also used as OEM, and less expensive than OEM parts. (OEM Parts:31L-84714-00 is 352 as of December 2022) So I think it is good.
I ended up only having the Socket side ruined and Valve was still alive, but, well, it is good to have it as a spare.
View detail
Fits: HONDA Dio 110, HONDA XLR BAJA, HONDA VFR400K, HONDA VFR400R-Z, KAWASAKI D-TRACKER125, KAWASAKI EPSILON 250, KAWASAKI KLX450R, YAMAHA XC50, YAMAHA XC50H, YAMAHA XC50R, YAMAHA BX50, YAMAHA BX50N, YAMAHA BX5S, YAMAHA YW50F, YAMAHA XF50L, YAMAHA BX50, YAMAHA BX50, YAMAHA BX50, YAMAHA BX50N, YAMAHA BX50N NEWS GEAR
High vibration resistance
[How is it used?
Replaced by out of valve.
How was your experience with it?
LEDs would be better, but it's not the place to put your money where your mouth is.
How did it compare to other products?
The quality will be the same as the sphere.
[Points to note]
Motorcycle's Rose Si changes Large
View detail
Use at your own risk for Motorcycle
[How is it used?
TZr250R (3XV) The product was used for the Headlight of the
It is for Vehicle, so it is at my own risk, but I bought it and replaced it because I liked the price and the warm color.
Was the one you received as per Image?
Packaged in inexpensive but solid Package.
Was the installation difficult?
In the case of TZr250R, it can be replaced without any special tools.
It can be replaced in about 5-10 minutes, as it does not require removal and installation of the Cowletc.
How was your experience with it?
It is for use on 4-wheeled vehicles, so if used on a Motorcycle, it is at your own risk.
As I recall, the difference is that they are not very vibration-proof, so their lifespan is a bit shorter or something.
The color of the Lamp itself was exactly as I had imagined.
As for the brightness, I personally feel it is not that bright. Well, I think it is sufficient for the price.
【Review】
The color was as I had imagined, but as for the light intensity, it is there.
Well, it is visible enough even when driving at night, so I think it is doing a good job for the price.
Quantity at this price:2pc. Since it contains a Set, I think it is cosmetic even if its life is a little short.
View detail
Light is now slightly whiter, despite the bulb.
[How is it used?
I had the impression that the light from the NORMAL bulb in the CUB was too dim and unsatisfactory, and wondered if this product would increase the brightness somewhat. I installed this product thinking that it might increase the brightness a little. This product can be used with many types of mopeds if the compatibility is good.
[Was it as per Image?
I think that the blurb for this product on the surface is wordy, even though the Page is simple. Incidentally, this is Halogen." It is not a Lamp, so keep that in mind before considering it.
Was the installation difficult?
The Valve can be easily replaced with a minimum of tools. However, when installing the Valve, avoid direct contact with the glass part of the Valve, or the life of the Valve may be shortened if grease from your fingers gets on the glass part and the Valve is used.
How was your experience with it?
Light becomes slightly whitish and brightness "Feeling" The brightness and visibility of the light has increased, but the actual brightness and visibility cannot be said for certain. It is not easy to say about the actual brightness and visibility of the light. When the light is off, the blue color of the Valve is reflected in the reflector and it looks beautiful.
[Included Parts:were they on?
There is no Instruction Manual, but the replacement process is easy, so it is not a problem.
[Was there anything that disappointed you?
There was a slight difference between the actual brightness and the brightness imagined by the package.
View detail
Used in older CUBs
The LED Bulb is more comfortable than the LED Bulb made by a certain M company because it is reflected by the reflector, so there is no sense of discomfort when viewed from any angle, and because it is the same color as the White Heat Bulb, the Red LED light does not leak out from the colorless part of the Lens used to illuminate the Number when the Stop lamp emits a strong light. It is recommended. View detail
Fits: YAMAHA MAJESTY250 (SG20J), KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI VULCAN 900 Custom, KAWASAKI VULCAN 900 Custom, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI SUPERSHERPA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI ELIMINATOR 125, KAWASAKI ELIMINATOR 125
Single Cylinder Engine's Crying Point
The SR, CUB, and of course the ESTRELLA… are all single cylinder engines, so there is a lot of vibration, and the tail lamp bulbs are prone to breaking.
I thought about stocking a lot of cheap bulbs, but Stanley uses them for motorcycles and cars because they meet safety standards.
The bulbs are prone to breaking, but they last quite a while.
good point
OEMs use this product for both motorcycles and automobiles, so the safety standard is also applied. [Color] Clear。
Relatively high durability.
Easy to replace. Even beginners can do it.
A bad point
A little expensive.
Large is strong during the daytime, but at night, if the tail lamp is off, following cars will not notice it, so be careful if you drive a single-cylinder engine that vibrates a lot.
I will get a ticket.
View detail
Room lightValve for Vehicle
I may not have a chance to use it in the future since LEDs are cheap and have good color...
Not White, but a mixture of Blue and Yellow colors.
View detail