Reviews
Made in Japan!
This tool set combines Ratchet, Socket, Glasses, Combination, Hexagonal Wrench, Hammer, etc., which is enough for a Sunday mechanic.
Sometimes I polish the tools because I still prefer them to be clean, but this time is soothing because I can immerse myself in them. lol
View detail
My first Inch tool
xr1200 Purchased at the time of purchase.
I have a complete set and I buy additional items from Astro that are missing, such as a Socket.
Miri, Inch, Torque and xr1200 are a mix, so that's OK for now!
View detail
I keep it for emergency use.
Because there were many tools that seemed to be used well in the assortment of contents in the Tools Set of compact size, I prepared it. Because it can be used as a replacement for an in-vehicle tool, one tool may be useful in several ways. View detail
Tools are a man's dream, aren't they!
I've always wanted one, but the price is so high that I was quite worried about buying it.
But I couldn't resist and decided to buy it! I snapped it up.
The things came in separate boxes and tools, and they arrived in two Large Kinadan Balls. The KTC tools I've always dreamed of! I couldn't stop grinning when I was arranging my own tools in a box! (Lol)
Needless to say, the quality is obvious:KTC's red box and tools. You'll want to keep looking at it.
Personally, my Tension is now as high as it was when I bought the Motorcycle.
To be honest, I haven't done that much maintenance and upkeep on my own until now. I don't even know the difference between the cheap ones and the expensive ones yet. Honestly, the Home Center tools were enough for me.
But!
I am very happy to see this KTC Tool set.
Motorcycle riders are probably just like that!
After all, buying a good car makes me want to maintain it. From now on, I'm going to do a little more maintenance on my car myself!
View detail
Cosmo is the best!
I don't have a Main toolbox at home, so I bought it for a few moments at home.
I thought it was 3/8Size, but it was 1/4Size. Well, considering the price, it is.
I put the KTC 3/8SizeRatchet and the hexagon in Main as a comparison.
If you take it out of the case and put it in a Nylon case or something, you can use it as a vehicle.
I think it has the minimum size and can be used in places that are not torqued.
View detail
Enough. [Contents] It is
For HARLEY, I've included all the main tools I'll use in my side bag in case of trouble at the touring destination. View detail
This is my favorite tool.
I carry it as a tool to carry when touring in the forest. Because I carry it with other 1/4Tool and Bit adapter, I take an active part in the sudden maintenance in the mountain in Large. It is highly recommended. View detail
This is my favorite tool.
The various heads can be replaced, and with this one, you can handle various scissors-type tasks. It was not possible to use it though I thought it was for carrying at first because it was larger than I thought it would be. However, the article itself is very solid, and it plays an active role as a main tool in Large. View detail
Yoshi Yoshi
KTC Quantity of similar products:Set is for 2.5mm to 10mm, 1.5mm to 10mm Quantity:It is an overwhelming Benefit that it is a Set. Because there are opportunities to use 2mm in electric parts etc. It is easy to buy more Size, but it is Large cumbersome that it is not in the same Case. There is no special point in accuracy, texture and strength, but it is normal enough to use. View detail
Mini Tools
A set of mini tool for biker or another job. The socket is slight hard to mount. Items is finishing with chrome cover is good. Cheap. And made in Taiwan. the socket View detail
For maintenance on the road
My Milwaukee Eight Harley doesn't come with on-board tools, so I'm on the road. I bought it because I thought it was necessary for Trouble, and I installed the Side Back with Option. I have it and I enjoy touring in it. I think I have all the tools I need in case of an emergency. View detail
Bit side Ratchet is now hard.
I thought that the tools must be used for a long period of time, so I used them for a certain period of time before making Impression. I did.
The first was the Tools Set, which was introduced onboard.
It's easy to use and can be used frequently, so it joins the toolbox.
However, the Ratchet on the Bit side begins to move reluctantly, and is used with frequent refueling. The side is perfectly normal.
Because SIGNET's Bit ratchet, which was introduced at the same time, works better at all, it is 15 degrees The tool is now limited to use only at the Offset location.
View detail
Clearance is Small and easy to use.
The SIGNET is considered reliable.
Tank and hose removal and on-board carburetor maintenance Best for Setting.
I have to use the tool for a while to get an impression of the quality of the tool, so I wrote a feeling of use. It was.
Japan's standard Screw, especially since I was impressed by the goodness of the number 2 Plus Matching, I'm a prisoner of the It is now.
It's a used car, but it's a pretty sticky one that the previous Owner was about to lick the Screw a bit. This product has a plus screw, and the SIGNET bit is added to the bad fit. All is now resolved at
Compact, Case is solid, and the Ratchet area doesn't move too badly. So even small tasks are good in the palm of your hand.
The bit is inserted in the handle, and it can serve as a driver, and it is a favorite of the tool to carry around. It is now.
When the Bit cracks, it seems to be a good tool, it cracks and the broken pieces bite into the Screw. I've never been in a situation where I couldn't get it. I use GunGun because it's rather easy to get it.
View detail
![[YAMASHIRO] Special Tool DAP & DIE SET For YK-018 Motorcycle](https://img.webike-cdn.net/catalogue/images/55528/YK-018_TS.jpg)
Not PROSpec.
The people who use the Tap and Dice a lot and use them on a daily basis are worried about them being like toys. I think.
But if you don't want to buy a tool that's used infrequently and doesn't cost thousands of dollars for a single screw hole.
This Quantity:With the Set products in the toolbox, you can rest assured that you'll have peace of mind in the event of an emergency.
I used it on my 25 year old Motorcycle Brake Rotor Bolt and Bolt holes The Screw hole/mountain is played to Beauty and
It worked fine
View detail
No worries!
Quantity as I did not have the tools:I was looking for a set tool.
I purchased this product because of the number of items and the cost performance.
I have a full range of maintenance that I could do myself.
I'm thinking of buying a new special tool.
View detail
Great for screw lickers!
I'm not good at maintenance and I'm not good at loosening screws, so I often lick the head of the Plus screw This Impact Driver is very useful for this kind of situation It applies force and loosens the screws If you are suspicious about a screw, you can hit it with this from the beginning and you can unscrew it without licking the Plus! ! View detail
If you want both price and performance, you can get it
I bought this as an in-vehicle tool because many of the external parts use hexes
I've had the opportunity to use it with quite a bit of force, but so far there's no sign of it breaking at all
This is a fairly user-friendly Wrench
The main sizes used in motorcycles are covered, so you can carry it in your car for now You won't have any trouble with the corners
Recommendation
View detail
Compact and convenient for touring
I thought it would come in handy with the Bit and Socket that I often use on my Motorcycle I bought it during the SIGNET Sale When I received it, it is in a pretty Compact Case and it is easy to carry in the Waist Bag It's going to fit The weight is known But! I didn't look at it very closely and realized when I received it that it was a 1/4Inch socket It was It also includes an Adapter for 3/8Inch socket, which is often used for You can also use the Ratchet Handlebar, but the same SIGNET offers a lightweight Compact The Ratchet Handlebar, which is a 1/4InchBoxerHandlebar, came out and I discovered that it was available and ordered it later I think this combination is the perfect companion for touring It's hard to do any real work but it will come in handy when you find yourself on the road with a loose screw Very well made Quantity:It is a set, but I feel that the Case itself might be broken by the impact That is a little bit of a drawback View detail
Trusted Brand, Good Cosmetology
No matter how careful I thought I was, I still licked the Screw's head a few times I'll have to have an Impact Driver for this one! When I was looking for it, SIGNET was on sale! I rely on SIGNET for most of my tools, so I have great faith in them They are very easy to use, sturdy and accurate I ordered the Chance and it arrived immediately, I couldn't miss it
The most recent Screwle lick incident has already been resolved, so we haven't used the Body yet, but The Bit had a 5/16in. thick one Even if you beat it considerably, it seems to be Large sturdy (Screw is broken?) You can also use ordinary Small bits with the 1/2-inchesAdapter You can also use ordinary Small Dice Bits with the 1/2-inchesAdapter
The Body and Bit come in a Compact and durable SteelCase, and the toolbox It fits nicely in the drawer Now that's a Large width improvement for peace of mind when you mess up at work!
View detail
At the very least, you'll need these tools
Is it because of the unique pulse of American motorcycles?
The front blinker bolt came loose while we were driving
I've been hanging out and hanging down
I knew then that it would be inconvenient to be without the tool, so I bought it
Because I only needed the bare minimum, Driver and
Hexagonal wrenches, Spanner, Pliers and Plug wrenches are I made this product that is complete
”DAYTONA” I was caught by the sound of it, but it was very easy to use It's normal
When Plug dies while running, use the Plug wrench and
When I was able to replace the Plug by myself, I had the, uh, tool
I'm really glad I did!
View detail